-----BEGIN PGP SIGNED MESSAGE-----

===============================================================================
CA-93:08                         CERT Advisory
                                May 24, 1993
                        SCO /bin/passwd Vulnerability
- -----------------------------------------------------------------------------

The CERT Coordination Center and the Santa Cruz Operation, Inc., (SCO) have
recently identified a potential for compromising system integrity on several
releases of SCO's Operating Systems.  This potential will not allow
unauthorized access to a system, but it may deny legitimate users the ability
to log onto the system.

The releases of SCO product that are affected are as follows:

       SCO UNIX System V/386 Release 3.2 Operating System Version 2.0
       SCO UNIX System V/386 Release 3.2 Operating System Version 4.0
       SCO UNIX System V/386 Release 3.2 Operating System Version 4.0 with
         Maintenance Supplement Version 4.1
       SCO Open Desktop Release 1.1.x
       SCO Open Desktop Release 2.0

Santa Cruz Operation and CERT recommend that sites using these SCO products
take action to eliminate this vulnerability from their systems. This problem
will be corrected in upcoming releases of SCO operating systems.

The Santa Cruz Operation has provided a Support Level Supplement (SLS), as
described below. They have also provided an interim workaround until sites
can obtain and install the Supplement.

If you have any questions about obtaining or installing the security
supplement, contact SCO Support during normal business hours or send
electronic mail to [email protected].

       USA/Canada: 6am-5pm Pacific Daylight Time (PDT)
       -----------
       1-800-347-4381  (voice)
       1-408-427-5443  (fax)

       Pacific Rim, Asia, and Latin American customers: 6am-5pm Pacific
       ------------------------------------------------ Daylight Time
                                                        (PDT)
       1-408-425-4726  (voice)
       1-408-427-5443  (fax)

       Europe, Middle East, Africa: 9am-5:30pm British Standard Time (BST)
       ----------------------------
       +44 (0)923 816344 (voice)
       +44 (0)923 817781 (fax)

- -----------------------------------------------------------------------------

I.   Description

    A problem exists in /bin/passwd in the SCO operating system versions
    detailed above.

II.  Impact

    This vulnerability can deny legitimate users the ability to log onto
    the system.

III. Solution

    The Santa Cruz Operation and CERT recommend that all affected sites
    obtain and install the Support Level Supplement. Instructions are
    provided below.

    The Santa Cruz Operation and CERT also recommend that sites consider
    applying the following workaround until they are able to obtain
    and install the Support Level Supplement.

    A. Workaround

    This workaround will prevent users from changing their passwords
    until the Support Level Supplement is installed.

    As root, modify the permission on the existing /bin/passwd
    to prevent misuse.

           # /bin/chmod 2110 /bin/passwd

    Before installing the update, the permissions should again be reset.
    As root, modify the permission on the existing /bin/passwd.

           # /bin/chmod 2111 /bin/passwd

    B. Supplement

    SCO has prepared a Support Level Supplement (SLS) to address this
    issue.  This is free to all customers, regardless of Support status.
    Sites can obtain this update via anonymous FTP from ftp.sco.COM
    (132.147.106.6). The files are located in:

       Filename          File Contents               Size      Checksum
       /SLS/uod368.Z     Update                     105857      62288
       /SLS/uod368.ltr   ASCII Cover letter and       5514      29520
                         installation instructions

    The update may also be obtained from SCO via:

    --  anonymous UUCP in the /usr/spool/uucppublic/SLS directory
        on the SOS bulletin board
    --  CompuServe in the SCO Unix Library Section of the SCO Forum
    --  hardcopy format (on diskette) from the media department at
        SCO Support.

    To retrieve and install the SCO Support Level Supplement, you must follow
    the instructions below. The detailed instructions described below will
    not be included in future advisories.

============================================================================
               Beginning of Text provided by SCO
============================================================================

FTP download information:
=========================

You must have a connection to the Internet to use this service, and
should be familiar with the FTP command.

The command to use is:

ftp ftp.sco.COM

     or

ftp 132.147.106.6

You will be prompted for a login and password.  Log in as "anonymous" and
use your E-MAIL address as the password.

On ftp.sco.COM the fix and the cover letter files are in the ./SLS directory.
You will want to "cd" to this directory, set "binary", and "get" the files
uod368.Z and uod368.ltr.

Note that these files are also available from UUNET via anonymous FTP at
ftp.uu.net in the /sco-archive/SLS directory.

UUCP download information:
==========================

for the USA, Canadian, Pacific Rim, Asia, and Latin American customers:
- -----------------------------------------------------------------------
Machine name:   sosco
UUCP user:      uusls           (no password)
Modem Phone numbers:
Telebit Trailblazer Plus      408-429-1786      9600 baud
Telebit 1500 V.32, 2@         408-425-3502      2400, 9600 baud
Hayes V Series 9600, 2@       408-427-4470      9600 baud

for Europe, the Middle East, and Africa:
- ----------------------------------------
Machine name: scolon
UUCP user: uusls
Password: bbsuucp
Modem Phone numbers:
Dowty Trailblazer +44 (0)923 210911

The following information explains how to transfer the SLS from the
machine sosco using UUCP. A similar procedure can be used for scolon,
by changing the Systems file entry appropriately. This information assumes
that you are using an SCO Operating System to download the files. Other
systems may or may not be similar in their UUCP setup.

Before attempting to transfer, you must have a modem configured to dial out
from your computer.  For more information on configuring a modem, see the
chapter on "Adding Terminals and Modems" in the System Administrator's
Guide.

Once you have your modem configured for dialing out, you must set up
your UUCP configuration to recognize the SCO system which contains the
files.  If you have a 2400 baud or lower speed modem, add the following
line to the end of the "Systems" configuration file in the directory
/usr/lib/uucp:

sosco Any ACU Any 14084253502 ogin:-@-ogin:-@-ogin: uusls

                             or

sosco Any ACU Any 14084274470 ogin:-@-ogin:-@-ogin: uusls


If you have a Telebit brand modem, use the following line:

sosco Any ACU Any 14084291786 ogin:-@-ogin:-@-ogin: uusls

Once your system is configured, you can use the uucp(C) command to
request files from the remote system.  All files for Support Level
Supplements reside in /usr/spool/uucppublic/SLS.

The first file that should be downloaded is "uod368.Z" (the actual fix).
The uucp(C) command to transfer this file into the local directory
/usr/spool/uucppublic on your system would be:

uucp sosco!/usr/spool/uucppublic/SLS/uod368.Z /usr/spool/uucppublic/uod368.Z

(If you are using the C shell command interpreter, you must enter a
backslash character "\" before the exclamation mark "!" to prevent
the C shell history mechanism from intercepting the rest of the
command line.)

Next you would repeat the above procedure for "uod368.ltr" (the
cover letter for the fix).

Obtaining a hard copy of the SLS:
=================================

This SLS is available in hard copy form.  Customers should order it from their
Support provider or by calling SCO Support during normal business hours.
Please be sure to ask for "Support Level Supplement UOD368, the Security
Supplement".  This is free to all customers, regardless of Support status.

       USA/Canada:
       -----------
       1-800-347-4381  (voice)
       1-408-427-5443  (fax)

       Pacific Rim, Asia, and Latin American customers:
       ------------------------------------------------
       1-408-425-4726  (voice)
       1-408-427-5443  (fax)

       Europe, Middle East, Africa:
       ----------------------------
       +44 (0)923 816344 (voice)
       +44 (0)923 817781 (fax)


Installation Preparation:
=========================

1. Uncompress the file:

     uncompress uod368.Z

2. Format a diskette that is large enough to contain the file
  using the format(C) command.

3. Use the dd(C) command to transfer the file to diskette.

      dd if=uod368 of=/dev/fd0135ds18  for 3.5" diskettes or

      dd if=uod368 of=/dev/fd096ds15  for 5.25" diskettes

Follow the directions in the uod368.ltr file to install the Supplement.

============================================================================
                End of Text provided by SCO
============================================================================
- ---------------------------------------------------------------------------
The CERT Coordination Center wishes to thank Peter Wemm of DIALix Services
for reporting this problem and Chris Durham, Technical Support, The Santa
Cruz Operation, for responding to this problem.
- ---------------------------------------------------------------------------

If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in Forum of Incident
Response and Security Teams (FIRST).

Internet E-mail: [email protected]
Telephone: 412-268-7090 (24-hour hotline)
          CERT personnel answer 8:30 a.m.-5:00 p.m. EST(GMT-5)/EDT(GMT-4),
          and are on call for emergencies during other hours.

CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh, PA 15213-3890

Past advisories, information about FIRST representatives, and other
information related to computer security are available for anonymous FTP
from cert.org (192.88.209.5).


-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBMaMxMHVP+x0t4w7BAQH+cgP/Y0RDyd2FQdF0MJOEi6cFwBXUVRPHD/Yw
uRm5H60+97A30v+tV2wJLcqv3OO+kHlO3kWIEt2obwkwznTwb8nOd5aD4lLGdjqs
dlbqiTbp0qGOL3sTWhogKqTQXUUKf/fi3tqExE4WJZsPFsmEp1F+ufaNkv0MNNhb
ff3aZ7X2tTc=
=G/J7
-----END PGP SIGNATURE-----