THE FOLLOWING INFORMATION CAME TO ME FROM JOE LISMAN, K7PZH OF DOS PALOS, CA.
HE GOT IT FROM RAY MILLS, W6WIM, ALSO OF DOS PALOS.  THE INFORMATION SHEET WAS
TITLED:

FOUR ELEMENT QUAD - FULLERTON RADIO CLUB
It is supposedly equal to a Cushcraft 11 element beam.


LR  21" per side                         LT  20.51" per side
84.1" total                              82.04" total
Diagonal length 29.73"                   Diagonal length 29.01"
_________________________                _________________________
|.                       .|              |.                       .|
|   .                 .   |              |   .                 .   |
|      .           .      |              |      .           .      |
|         .     .         |              |         .     .         |
|            .            |              |            .            |
|         .     .         |              |         .     .         |
|      .           .      |              |      .           .      |
|   .                 .   |              |   .                 .   |
|_________________________|              |_________________________|



LD - 1, 19.9" per side                   LD - 2, 19.7" per side
79.6" total                              78.8" total
Diagonal length 28.14"                   Diagonal length 27.86"

_________________________                _________________________
|.                       .|              |.                       .|
|   .                 .   |              |   .                 .   |
|      .           .      |              |      .           .      |
|         .     .         |              |         .     .         |
|            o            |              |            o            |
|         .     .         |              |         .     .         |
|      .           .      |              |      .           .      |
|   .                 .   |              |   .                 .   |
|_________________________|              |_________________________|



The antenna boom is made out of schedule 40 pvc pipe, 1" size, which is 1.5"
in diameter, actual size.  The boom is approximately 42" long.  The cross
pieces are 1/4 inch bicycle flag poles made out of fiberglass, or you could
use fiberglass fence posts available from Orchard Supply Hardware stores in
California.


                         TOP VIEW LOOKING DOWN

 LR                    LT                   LD-1                 LD-2

        Vertical Polarization Feed Point
                        |
                        V
  _                     _                    _                    _
 | |                   | |                  | |                  | |
 | |                   | |                  | |                  | |
 | |                   | |   1" PVC T       | |                  | |
 | |                   | |      |           | |                  | |
_|_|___________________|_|__________________|_|__________________|_|_
|____o_________________o_______|_|_|________o____________________o____|
 | |                   | |     |_|          | |                  | |
 | |                   | |                  | |                  | |
 | |                   | |                  | |                  | |
 | |                   | |                  | |                  | |
 |_|                   |_|                  |_|                  |_|

  | <-----16.1"-------> | <----12.04"------> | <-----
       0.2 wavelength        0.15 wavelength      0.15 wavelength

There it is folks and I hope that you are able to build it from these crude
instructions.  REMEMBER FOR VERTICAL POLARIZATION, YOU FEED A QUAD FROM THE
HORIZONTAL SPREADER END.  I think that one of the uses of packet should be the
desimination of information.  This is my attempt at a construction article.
How about some more homebrew projects with illustrations on packet radio.
I would be interested in reports from anyone who builds this antenna. Good
luck and I will look forward to your commeDoug, KI6DS @ K6RAU-1