FORVAL MODEMS
Super High-Speed,
Internal / External, Dial-up Modems
For IBM PC / Compatibles
Forval's full-duplex IM / SA series of dial-up modems are quality
engineered for super high-speeds. The IM14400 (Internal) at 14.4 kbps
and the SA14400 (External) at 14.4 kbps are versatile full duplex
V.32bis / V.42bis modems for personal computers with industry-standard
speeds of 14400 / 12000 / 9600 / 4800 / 2400 / 1200 / 300 bps.
These models offer data compression for throughput up to FOUR TIMES
FASTER than the base speed and advanced error correction for exceptional
accuracy.
The IM Series is designed to expand its capabilities as your needs
change. With the exclusive " FORVAL-LINK (tm) software, upgrades can be
made in a matter of minutes over the phone line.
With FORVAL, you have the MODEM-With-A-Future!
FEATURES:
-14.4 bps ( New V.32bis CCITT standard ) Fully compatible with all
other brand v.32bis modems.
-l9.2 bps Proprietary mode ( IM19200 / SA19200 models only. ) This code
will be changed to be fully compatible with the CCITT standard when
approved for 19.2 Kbps.
* Super high speeds - up to 57.6 Kbps with data compression
* All standard dial-up speeds- complies with both CCITT and Bell
standards. Compatible with all major modems.
* FORVAL LINK (tm) upgrades - download new features, speeds and
capabilities over the phone.
* FORVAL TURBO INTERFACE (tm) provides absolute data integrity between
your PC and the IM14400 at all speeds.
* Compatible with the Hayes (tm) "AT" command set and a wide range of
communications software.
* Built in self-test and diagnostics
* The SA14400 has an LCD display providing complete insight into modem
operations. Can be positioned horizontally or vertically.
* 5 year warranty ( one of the few manufacturers that offer this )
INFORMATION:
The IM14400 / SA14400 modems comply with the V.32bis standard for
data transmission, V.42 error correction and V.42.bis, the newest
data compression standard. By combining the latest industry standards
with intelligent engineering, the asynchronous IM14400 / SA14400
deliver data at an impressive base speed of 14,400 bps. And the
V.42bis provides a 4:1 data compression ratio with speeds exceeding
57.6Kbps-transmitting over six times faster than 9600 bps modems.
COMPATIBILITY:
When connecting with slower modems, the IM14400/SA14400 modems offer
excellent compatibility and high data performance over a broad range
of transmission speeds. Equipped with automatic step-down via CCITT
standards, the IM14400/SA14400 ensure data transference at the highest
levels of speed, compression and error correction possible.
For custom modem configurations, the IM14400/SA14400 feature user-
selectable options for setting speed rates, data compression levels
and error handling methods.
SOPHISTICATED ERROR CORRECTION AND HANDLING:
When exchanging critical data at accelerated speeds, accuracy is
imperative. With the IM14400/SA14400 modems, sophisticated error
correction and data handling capability, data integrity is preserved
under the worst line conditions. The built-in Turbo Interface on the
IM14400 provides absolute data integrity at all speeds along with
full flow control of remote modems. The SA14400 modem has the optional
Turbo Interface Card that can be purchased to provide the same reliability
as the Internal modem.
PRODUCT SPECIFICATIONS
IM14400/SA14400
SPEED/COMPATABIITY
DATA TRANSMISSION SPEED:
Base Speed: 14,400bps
Maximim Compressed: 115,200
Asynchronous
Transmission: DTE to Modem
COMPATABILITY SPEEDS
CCITT V.32bis 14,400/12000bps
CCITT V.32 9600/4800bps
CCITT V.22bis 2400/1200bps
Bell 212A 1200bps
Bell 103 300bps
COMMAND SET:
Hayes AT command set with MNP and V.42/V.42bis Extensions
THROUGHPUT CONTROL:
Automatic fallback via CCITT standards
TRANSMIT AND RECEIVE LEVELS:
Trasmit: - 10dBm
receive: - 6dBm to -45dBm
DATA FORMAT:
Asynchronous 7,8 bits: 1 or 2 stop bits
Parity: Even, odd, mark, space or none
Uses: AT/PC COM1, COM2, COM3 or COM4
DTE speed conversions
FLOW CONTROL:
XON/XOFF, RTS/CTS
DATA COMPRESION/ERROR CONTROL:
Error control
V.42(LAPM and MNP Class 2-4)
trellis Encoding with Viterbi decoding
FORVAL Turbo Interface
DATA COMPRESSION:
V.42bis: Compression up to 4:1
Throughput up to 57.6Kps
MNP Class 5: Compression up to 2:1
Throughput up to 28.8Kbps
EQUALIZATION:
Automatic adaptive equalizer with retrain
ECHO CANCELLATION:
Far end: 25ms echo span
Near end: Less than 17ms echo span
far end frequency offset compensation
Two-hop satellite delay capability
DIAGNOSTICS:
Local analog loopback (V.54 loop 3)
Local analog loopback with self-test
Local digital loopback (V.54 loop 1)
Remote digital loopback (V.54 loop2)
Remote digital loopback with self-test
OPERATING FEATURES:
LINE INTERFACE:
2-wire dail-up telephone lines
Tone and pulse dialing support
Auto-dial/Auto-answer
HARDWARE REQUIRMENTS:
IBM PC/XT/AT 386/486 or equivalent
REGULATORY COMPLIENCE:
Internal/External
FCC Part 68
FCC Part 15, Sub part J, Class A
CSA/DOC (Canada)
External
Enclosure & PCB assembly UL 1459 compliant
Wall-mount, plug-in power supply: UL, CSA registered
POWER (External):
60 Hz, 120VAC
22W(max) 14W(nominal)
ENGINEERING DESIGN:
16 bit microprocessor-based modem engine
Digital signal processor-based data pump
Data Access Arrangement (DAA)
256K non-volatile memory
WARRANTY:
5 years limited
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
FORVAL is a trademark of FORVAL AMERICA INC.
All product names are trademarks or registered trademarks of their
respective manufacturers
******************************************************************************
LOOKING INTO THE FUTURE:
IM19200 / SA19200 ULTRA HIGH SPEED MODEMS.
* Available the early part of this year.
* Transmission of 21.6Kbps allowing throughput of over 57.6 Kbps with
data compression.
* FORVAL LINK (tm) upgrades modem performance over the phone.
* Advanced error correction for protection of data at all speeds.
* Compatibility with CCITT dial-up standards
* Compatibility with the Hayes (tm) "AT" command set and a wide range
of communications software.
* SA19200 has the LCD display providing complete insight into modem
operations. Can be positioned horizontally or vertically.
* 5 Year Warranty
PERFORMANCE WITHOUT COMPROMISE:
The V.42 error correction and V.42bis data compression ensure data
integrity at any speed. Sophisticated engineering and CCITT standards
are built into the modems. The modems automatically negotiate CCITT
standards when connecting with slower modems at fall-back speeds
ranging from 14400, 12000, 9600, 4800, 2400, 1200 to 300 bps. You can
also set these levels manually.
UPGRADES ARE JUST A PHONE CALL AWAY:
With FORVAL-LINK (tm) software and a phone call to our headquarters,
you can upgrade your modem instantly and maintain the technological
edge. Costly obsolescence is virtually eliminated.
SA19200 MODEMS
Like all Forval stand-alone modems, the SA19200 can be adapted with a
bookend base for use as a slimline tower. When desktop space is at a
premium, this tower configuration has a footprint of only 16 square
inches. Of course, you can also set it in the standard horizontal
position.
The IM19200/SA19200 modems will be a proprietary speed, however when
the CCITT approves a 19.2 Kbps, this modem will be able to be configured
via the FORVAL-LINK (tm) to be fully compatible with the new standard.
Which means that when the standard is approved, this modem will not be
obsolete.
The IM14400/SA14400 modems are also fully capabable of being upgraded
via the FORVAL-LINK (tm) to make them fully compatible at the 19.2 Kbps
speeds.
All these modems will also be able to be upgraded in the later part of
this year to have FAX capabilities. Again by use of the FORVAL-LINK (tm)
I guess it is easy to see why they say:
" FORVAL MODEMS ARE THE MODEMS WITH A FUTURE "
Contact Suburban Software BBS for pricing and availability:
