SEAGATE TECHNOLOGY, INC.
      Customer Technical Support FAX Network +1 408 438-8137
    Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
��������������������������������������������������������������������Ŀ
� United States    +1 408 438-8771 �  United Kingdom +44 628 478011  �
��������������������������������������������������������������������Ĵ
� Germany         +49  89 140-9331 �  Singapore      +65   227-2217  �
���������������������������������������������������������������������
                           (C)opyright 1991



ST-4384E (94186-383H) Wren 5 FH ESDI

      �Data Cable              �Controller Cable     /�5�G�G�12\
     �������� ���             �������������� ���    ͳ 0 0 0 0 ���
               o o o o o 1����������Ŀ o o o o o o o �����������
               o o o o o �Terminator�� o o o o o o o
               1 2 3 4 5               7 6 5 4 3 2 1
 Motor Start ��� � � � �                        �Drive Selects
option enable     � � � �� Factory use    Note:  There are 2 types of PWA's.
                 � � �    only           One with drive select header on the
      Sectors    � � �                   left, and one with header on the
      ������������������                 right (like this). Pin positions
         64      0 0 0                   are the same.
         35      0 0 1 = 329,011,200
         10      0 1 0
         19      0 1 1                0=open; 1=closed
         36      1 0 0 = 338,411,520
         34      1 0 1 = 319,610,880
         87      1 1 0
   Add Mark      1 1 1

                            ST-4384E
                       94186-383H WREN 5 FH

      UNFORMATTED CAPACITY (MB) ________________383
      FORMATTED CAPACITY (34 SECTORS) (MB) _____319 **
      ACTUATOR TYPE ____________________________VOICE COIL
      TRACKS ___________________________________18360
      CYLINDERS ________________________________1224
      HEADS ____________________________________15
      DISCS ____________________________________8
      MEDIA TYPE _______________________________THIN FILM
      RECORDING METHOD _________________________RLL (2,7)
      TRANSFER RATE (mbytes/sec) _______________1.25
      SPINDLE SPEED (RPM) ______________________3,600
      AVERAGE LATENCY (mSEC) ___________________8.33
      INTERFACE ________________________________ESDI
      TPI (TRACKS PER INCH) ____________________1280
      BPI (BITS PER INCH) ______________________19600
      AVERAGE ACCESS (ms) ______________________14.5
      SINGLE TRACK SEEK (ms) ___________________3
      MAX FULL SEEK (ms) _______________________29
      MTBF (power-on hours) ____________________100,000
      POWER REQUIREMENTS: +12V START-UP (amps) _4.5
                          +12V TYPICAL (amps) __2.0
                          +5V START-UP (amps) __1.4
                          +5V TYPICAL (amps) ___0.8
                          TYPICAL (watts) ______23
                          MAXIMUM (watts) ______61
      BUFFERED STEP PULSE RATE (micro sec) _____
      WRITE PRECOMP (cyl) ______________________N/A
      REDUCED WRITE CURRENT (cyl) ______________N/A
      LANDING ZONE (cyl) _______________________AUTO PARK
      IBM AT DRIVE TYPE ________________________*

* MAY REQUIRE A CONTROLLER WITH BIOS SUPPORT, OR FORMATTING
  AND PARTITIONING SOFTWARE.  ALSO, CHECK TO SEE IF YOUR CMOS SETUP
  HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE AVAILABLE.

** ESDI controllers which offer an Alternate/Spare sector per track
  option will format to a capacity = Cyl*Hd*(SPT-1)*512 bytes

Seagate reserves the right to change, without notice, product
offerings or specifications. (6/26/90)


You are viewing proxied material from gopher.altexxanet.org. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.