SEAGATE TECHNOLOGY, INC.
      Customer Technical Support FAX Network +1 408 438-8137
    Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
��������������������������������������������������������������������Ŀ
� United States    +1 408 438-8771 �  United Kingdom +44 628 478011  �
��������������������������������������������������������������������Ĵ
� Germany         +49  89 140-9331 �  Singapore      +65   227-2217  �
���������������������������������������������������������������������
                           (C)opyright 1991



ST-3283N
Rear View              �� 50 pin SCSI Interface I/O connector
                      �
                      �                    DC power
  (TOP)      �������������  ����������͸ /�5�G�G�12\
         ���͵::::::::::::::::::::::::1�͵ 0 0 0 0 ��
  (BOTTOM)   �������������������������; �����������
                ������1 ������1 ������1
                ������� ������� �������
                 Terminating Resistor Packs


ST-3283N
Left View                       o o o1
             (TOP)             o o o     �͸
    Front....���������������������������͵ I/O connector
                               � � �     �;
            SCSI Address ID 1 �� � �
                         ID 2 ���� �
                         ID 4 ������


ST-3283N
Right View  (board part number 260035, early version)

                o o4                    (TOP)              o o4
          �͸  1o�o      o o o6                           1o o
   DC Power ������������1o�o o ��������������������������������
          �;    �      ������                            � �
                 �      Active/Passive Termination         � � Remote Start
               ����    �������                            ��� Parity Enable
    Terminator Power  �������������������������������Ŀ
               �����  � Active: Pins 1 & 2 shorted     �
                 �    �         only (+2.85V to        �
                 �    �         110 �) for FAST        �
                 �    �         SCSI;                  �
                 �    �Passive: Pins 2 & 4 shorted     �
                 �    �         AND pins 5 & 6 shorted �
                 �    �         (+5V and GND to        �
                 �    �         220/330 �) for         �
                 �    �         standard SCSI.         �
                 �    ����������������������������������
                 �
   ���������������������������������������������������������������������Ŀ
   �Terminator Power: From SCSI Connector ���������������� Pins 1 & 2     �
   �                  From Power Connector ��������������� Pins 1 & 3     �
   �                  To SCSI Connector Only ������������� Pins 3 & 4     �
   �                  From Power Connector and ����������� Pins 1 & 2 AND �
   �                    to SCSI Bus --------------------------- 3 & 4     �
   �                 Terminating Resistors not Installed � Pins 2 & 4     �
   ������������������������������������������������������������������������


ST-3283N
Right View

                o o4     o o o6         (TOP)
          �͸  1o�o     1o�o o
   DC Power ������������  �    ��������������������������������
          �;    �        �
                 �      ������
                 �      Active/Passive Termination
               ����    �������
    Terminator Power  �������������������������������Ŀ
               �����  � Active: Pins 1 & 2 shorted     �
                 �    �         only (+2.85V to        �
                 �    �         110 �) for FAST        �
                 �    �         SCSI.                  �
                 �    �Passive: Pins 2 & 4 shorted     �
                 �    �         AND pins 5 & 6 shorted �
                 �    �         (+5V and GND to        �
                 �    �         220/330 �) for         �
                 �    �         standard SCSI; default.�
                 �    ����������������������������������
                 �
   ���������������������������������������������������������������������Ŀ
   �Terminator Power: From SCSI Connector ���������������� Pins 1 & 2     �
   �                  From Power Connector (default) ����� Pins 1 & 3     �
   �                  To SCSI Connector Only ������������� Pins 3 & 4     �
   �                  From Power Connector and ����������� Pins 1 & 2 AND �
   �                    to SCSI Bus --------------------------- 3 & 4     �
   �                 Terminating Resistors not Installed � Pins 2 & 4     �
   ������������������������������������������������������������������������


ST-3283N
Front View (board part number 260035, early version)

    (TOP)          o o o o o o o+
              ���� o � o o o o o-��������������������������
    (BOTTOM)      1������� � � �
                       �   � � ��� Remote LED
                       �   � ����� Reserved
                       �   ������� Ext. Spindle Clock Synch
                       �            pin-9 is Clock Ground
                       �         � Reserved
                       ���������Ĵ Reserved
                                 � Reserved pin-3 removed for key
                                 � Reserved

ST-3283N
Front View

                ������������������� SCSI ID's (none for ID0)
                �                    not used if ID set on side jumpers
                �   ��������������� Ext. Spindle Clock Synch
                �   �                pin-5 is Clock Ground
                �   � ������������� Remote LED
 (TOP)        ��Ŀ � �     ������� Reserved
              4 2 1 � � ������Ŀ
              o o o o o-o o o o o
             1o o o o o+o o o o o  o o o o+
              ��������������������1o o o o-����������������
                                   � � � �
 (BOTTOM)                          � � � ��� Remote LED
                                   � � ����� Ext. Spindle Clock Synch
                                   � �        pin-5 is Clock Ground
                                   � ������� Remote Start Enable
                                   ��������� Parity Enable


                            ST-3283N


      UNFORMATTED CAPACITY _____________________
      FORMATTED CAPACITY (xx SECTORS) __________248.62
      AVERAGE SECTORS PER TRACK ________________57 rounded down
      ACTUATOR TYPE ____________________________ROTARY VOICE COIL
      TRACKS ___________________________________8,455
      CYLINDERS ________________________________1,689 (user)
      HEADS ____________________________________5
      DISCS (3.5 in) ___________________________3
      MEDIA TYPE _______________________________THIN FILM
      HEAD TYPE ________________________________THIN FILM
      RECORDING METHOD _________________________ZBR RLL (1,7)
      INTERNAL TRANSFER RATE (mbits/sec) _______15.0 to 24.4
      EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async
      EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync
      SPINDLE SPEED (RPM) ______________________4,500
      AVERAGE LATENCY (mSEC) ___________________6.67
      BUFFER ___________________________________128 Kbyte SeaCache
       Read Look-Ahead Multisegmented cache
      INTERFACE ________________________________SCSI-2 Fast
      SECTORS PER DRIVE ________________________485,601
      TPI (TRACKS PER INCH) ____________________1,960
      BPI (BITS PER INCH) ______________________38,000
      AVERAGE ACCESS (ms) ______________________12
      SINGLE TRACK SEEK (ms) ___________________<4
      MAX FULL SEEK (ms) _______________________32
      MTBF (power-on hours) Office _____________250,000
      POWER REQUIREMENTS: +12V START-UP (amps) _1.5
      POWER MANAGEMENT (Watts):
                          ACTIVE _______________5.7
                          IDLE _________________3.0
                          STANDBY ______________1.0
      WRITE PRECOMP (cyl) ______________________N/A
      REDUCED WRITE CURRENT (cyl) ______________N/A
      LANDING ZONE (cyl) _______________________AUTO
      IBM AT DRIVE TYPE ________________________0

Formatted at the factory with 2 alternate cylinders.  Total physical
cylinders equal 1691.

      Physical:
                       Height (inches/mm):     1.00/25.4
                       Width  (inches/mm):     4.02/102.1
                       Depth  (inches/mm):     5.77/146.6
                       Weight    (lbs/kg):     1.5/0.68

Note: If FAST SCSI transfer rates are used, then the active
termination options must be used.  If the transfer rates are 5.0
MBytes/sec and below, either method of termination can be used.
Although active and passive terminated devices can be installed on the
same bus, both ends of the cable should be terminated in the same
manner, either both active or both passive.

Note: If your application requires no terminators, remove the
terminators from the circuit board.  Merely removing the terminator
power source selection jumper does not disconnect the terminator
resistors from the circuit.

ZBR = Zone Bit Recording = Variable sectors per track

Seagate reserves the right to change, without notice, product
offerings or specifications. (08/08/94)