SEAGATE TECHNOLOGY, INC.
      Customer Technical Support FAX Network +1 408 438-8137
    Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
��������������������������������������������������������������������Ŀ
� United States    +1 408 438-8771 �  United Kingdom +44 628 478011  �
��������������������������������������������������������������������Ĵ
� Germany         +49  89 140-9331 �  Singapore      +65   227-2217  �
���������������������������������������������������������������������
                           (C)opyright 1991



ST-274A (94204-74 or 94204-65) Wren 2 HH AT (IDE)


                                       ���Master on /Slave off
                                       �             ���������Ŀ
                                       �� Leave as is� O O O O � Power
      1              J3                �� 1  J2      \���������/
      :::AT:(IDE):Cable::::::::::::::: :: :::::::::   12 G G 5
     �����������������������������������������������������������


                            ST-274A
                       94204-74 WREN 2 HH

      UNFORMATTED CAPACITY (MB) ________________74
      FORMATTED CAPACITY (26 SECTORS) (MB) _____65.5
      ACTUATOR TYPE ____________________________VOICE COIL
      TRACKS ___________________________________4740
      CYLINDERS ________________________________948
      HEADS ____________________________________5
      DISCS ____________________________________3
      MEDIA TYPE _______________________________THIN FILM
      RECORDING METHOD _________________________RLL
      TRANSFER RATE (mbytes/sec) _______________0.937
      SPINDLE SPEED (RPM) ______________________3,600
      BUFFER ___________________________________32 Kbyte
        Read Look-Ahead, Non-Adaptive,
        Single-Segmented Buffer
      INTERFACE ________________________________AT
      TPI (TRACKS PER INCH) ____________________960
      BPI (BITS PER INCH) ______________________13489
      AVERAGE ACCESS (ms) ______________________29
      SINGLE TRACK SEEK (ms) ___________________5
      MTBF (power-on hours) ____________________40,000
      POWER REQUIREMENTS: +12V START-UP (amps) _4.5
                          +12V TYPICAL (amps) __1.5
                          +5V START-UP (amps) __0.6
                          +5V TYPICAL (amps) ___0.4
                          TYPICAL (watts) ______20
                          MAXIMUM (watts) ______58
      BUFFERED STEP PULSE RATE (micro sec) _____
      WRITE PRECOMP (cyl) ______________________N/A
      REDUCED WRITE CURRENT (cyl) ______________N/A
      LANDING ZONE (cyl) _______________________AUTO PARK
      IBM AT DRIVE TYPE ________________________4, *

Possible translation:   940 cyl, 8 heads, 17 sectors = 65,454,080

Note: A "custom" or "user-definded" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE.

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION

WARNING - Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.

Seagate reserves the right to change, without notice, product
offerings or specifications. (6/26/90)