SEAGATE TECHNOLOGY, INC.
      Customer Technical Support FAX Network +1 408 438-8137
    Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
��������������������������������������������������������������������Ŀ
� United States    +1 408 438-8771 �  United Kingdom +44 628 478011  �
��������������������������������������������������������������������Ĵ
� Germany         +49  89 140-9331 �  Singapore      +65   227-2217  �
���������������������������������������������������������������������
                           (C)opyright 1991



ST-1162A (94354-160) Swift AT (IDE)
    ����\
    � O �  5
    � O �  G                                          �Ŀ  Some have
    � O �  G       AT (IDE) Cable                     � �� these pins
    � O � 12  1�........................�   o o o o o(o o)  6 off
    ����/       ........................    o o o o o(o o)  7 off
   �������������������������������������������������������
                                            1 2 3 4 5 6 7
        ON                 OFF              � � � � � ���
   1   Slave              Master          ��� � � � �  �
   2   5 Heads            7/9 Heads       ����� � � �  �
   3   Slave installed    Slave not inst. ������� � �  �
   4   7 byte ECC         4 byte ECC      ��������� �  �
   5   Factory test       Normal Oper.    �����������  �
   6/7 Some PWA's have these pins, factory use  ��������


                            ST-1162A
                         94354-160 Swift

      UNFORMATTED CAPACITY (MB) ________________162
      FORMATTED CAPACITY (29 SECTORS) (MB) _____143
      ACTUATOR TYPE ____________________________VOICE COIL
      TRACKS ___________________________________9,648
      CYLINDERS ________________________________1,072
      HEADS ____________________________________9
      DISCS ____________________________________5
      MEDIA TYPE _______________________________THIN FILM
      RECORDING METHOD _________________________RLL
      TRANSFER RATE (mbytes/sec) _______________1
      SPINDLE SPEED (RPM) ______________________3,600
      BUFFER ___________________________________32 or 64 Kbyte
        Read Look-Ahead, Non-Adaptive,
        Single-Segmented
      INTERFACE ________________________________AT BUS
      TPI (TRACKS PER INCH) ____________________1,350
      BPI (BITS PER INCH) ______________________22,638
      AVERAGE ACCESS (ms) ______________________15
      SINGLE TRACK SEEK (ms) ___________________4
      MTBF (power-on hours) ____________________150,000
      POWER REQUIREMENTS: +12V START-UP (amps) _2.5
                          +12V TYPICAL (amps) __0.7
                          +5V START-UP (amps) __0.75
                          +5V TYPICAL (amps) ___0.4
                          TYPICAL (watts) ______11
                          MAXIMUM (watts) ______33.75
      BUFFERED STEP PULSE RATE (micro sec) _____6-200
      WRITE PRECOMP (cyl) ______________________N/A
      REDUCED WRITE CURRENT (cyl) ______________N/A
      LANDING ZONE (cyl) _______________________AUTO PARK
      IBM AT DRIVE TYPE ________________________*

* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE.  ALSO, CHECK TO
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
AVAILABLE.

Possible translation:  804 cyl, 12 heads, 29 sectors = 143,253,504
Possible Translation:  603 cyl, 16 heads, 29 sectors = 143,253,504
Possible Translation: 1024 cyl, 16 heads, 17 sectors = 142,606,336
Possible Translation:  978 cyl, 11 heads, 26 sectors = 143,210,496

Note: A "custom" or "user-definded" CMOS drivetype  may ask for a
numerical value for the Write Precompensation cylinder and for the
Landing Zone cylinder.  A basic rule-of-thumb for drive models that do
not require the old Write Precomp technique or a Landing Zone because
they are Auto-Parking is to add 1 to the cylinder value being used. As
an example: If cylinders equaled 820, then both Write Precomp and
Landing Zone would be entered as 821. Some BIOS will convert this to
65535 or -1, which are functionally equivalent to "none (not used)".

PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION

Already low-level formatted at the factory.

Since a User-definable or Custom translation geometry may be used, it
is imperative that the values be written down and kept with your
permanent records for retrieval in the event of CMOS battery failure.


                         Swift Remote LED Option

              Front View of Drive Without the Plastic Bezel

                                 �������Ŀ
                                 � A � B �    B = Anode
                                 �������Ĵ    D = Cathode
                                 � C � D �
             ...�������������������������������P�W�A���...


       � Default jumper at C-D for LED mounted on drive PWA
       � To use remote LED, remove jumper and extend B (Anode)
         and D (Cathode).
       � Swift LED kit 75912397 allows connection to a remote LED
       � Swift LED kit 95913369 has an LED for attachment to the
         system front bezel or a 5.25-inch frame kit

Seagate reserves the right to change, without notice, product
offerings or specifications. (6/26/90)