_____________________________________________________________________________
! !
! !
! !
! The United Anarchists of America !
! !
! proudly presents... !
! !
! !
! !
! !
! !
! !
! <><><><><><><><><><><><><><><><><><><><><><><><><> !
! <> <> !
! <> THE ANARCHIST'S GUIDE TO CIVILIAN WARFARE <> !
! <> AND SABOTAGE <> !
! <> <> !
! <><><><><><><><><><><><><><><><><><><><><><><><><> !
! !
! !
! FEBRUARY 1987 ISSUE !
! !
! !
! !
! Written in Association with: !
! The Tracker !
! !
! !
! !
! !
! !
! !
! With Special Thanks to: !
! Bad Dog !
! !
! !
! !
! !
! !
! VOLUME 1 / NUMBER 1 !
! !
! "Miscellaneous Anarchy" !
! !
! !
! !
! This is a "monthly" publication....if you would like to have !
! back issues, or would like assistance, please get in contact !
! with me at the number given above, or try to get in touch !
! with The Tracker, wherever he may be. The authors of this !
! material will not take responsibility for its abuse/misuse !
! in any way. Use at your own risk....if you hurt yourself, we !
! CANNOT TAKE RESPONSIBILITY. !
! !
! !
! !
! !
!_____________________________________________________________________________!
Guide to Civilian Warfare and Sabotage page: 1
You would be surprised how many files are out that use what falls under the
category of a "fuse". They assume you just have a few lying around, or know
where to get them. Well, in some parts of the country,fuses are extremely hard
to come by...so this part of our first file is dedicated to fuses. Both are
very simple to make, and are fairly reliable:
Slow Burning Fuse (2 in. per minute approx.)
=================
Materials needed:
---> cotton string or 3 shoelaces
---> potassium nitrate or potassium chlorate
---> granulated sugar
Procedure:
1. wash the cotton string or shoelaces in HOT soapy water, then rinse
with fresh water.
2. mix the following together in a glass bowl:
1 part potassium nitrate or potassium chlorate
1 part granulated sugar
2 parts hot water
3. Soak strings or shoelaces in this solution.
4. Twist/braid 3 strands together and allow them to dry.
5. Check burn rate to see how long it actually takes.
note: the few inches of this fuse to be inserted into the explosive device
must be coated with a black-powder paste to ensure its reliability.
Fast Burning Fuse (40 in. per minute)
=================
Materials needed:
---> soft cotton string
---> fine black powder
---> shallow dish or pan
Procedure:
1. moisten powder to form a paste
2. twist/braid 3 strands of cotton together
3. rub paste into string and allow to dry
4. check burn rate
Guide to Civilian Warfare and Sabotage page: 2
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+ +
+ How to make POTASSIUM NITRATE for +
+ use in the above. +
+ +
+ Materials needed: +
+ ---> 3.5 gallons of nitrate bearing earth or other material +
+ ---> 1/2 cup of wood ashes +
+ ---> bucket or other similar container about 4 - 5 gallons +
+ in volume +
+ ---> 2 pieces of finely woven cloth, each a bit bigger than +
+ the bottom of the bucket +
+ ---> shallow dish or pan at least as large in diameter as +
+ the bucket +
+ ---> shallow, heat-resistant container +
+ ---> 2 gallons of water +
+ ---> something to punch holes in the bottom of the bucket +
+ ---> 1 gallon of any type of alcohol +
+ ---> heat source +
+ ---> paper & tape +
+ +
+ Procedure: +
+ 1. punch holes on the inside bottom of the bucket, so that +
+ the metal is "puckerd" outward from the bottom +
+ 2. spread cloth over holes in bottom +
+ 3. place wood ash on cloth; spread it out so that it covers +
+ the entire cloth and has about the same thickness +
+ 4. place 2nd cloth on top of the wood ashes +
+ 5. place the dirt or other material in the bucket +
+ 6. place bucket over shallow container (note: it may need +
+ supports on the bottom so the drain holes are not blocked) +
+ 7. boil water and pour it over the earth very slowly. Do NOT +
+ pour it all at once, as this will clog the filter on the +
+ bottom +
+ 8. allow water to run through holes into the shallow dish on +
+ the bottom +
+ 9. be sure water goes through ALL of the earth +
+ 10. allow water in dish to cool for an hour or so +
+ 11. carefully drain the liquid in the dish away, and discard +
+ the sludge in the bottom +
+ 12. boil this liquid over a fire for at least 2 hours. Small +
+ grains of salt will form - scoop these out with the paper +
+ as they form +
+ 13. when the liquid has boiled down to 1/2 its origional volume+
+ let it sit +
+ 14. after 1/2 hour add equal volume of the alcohol; when this +
+ mixture is poured through paper, small white crystals +
+ appear. This is the potassium nitrate. +
+ +
+++++++++++++++++++++++++ PURIFICATION +++++++++++++++++++++++
+ - redisolve crystals in small ammount of boiling water +
+ - remove any crystals that appear +
+ - pour through improvised filter then heat concentrated +
+ solution to dryness. +
+ - spread out crystals and allow to dry +
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Guide to Civilian Warfare and Sabotage page: 3
BULB-BOMBS
==========
ELECTRIC BULB INGNITER NAPALM-BULB
---------------------- ! -----------
Materials: ! Materials:
---> electric bulb ! ---> electric bulb (100w)
---> socket ! ---> 1/4 cup soap chips
---> black powder ! ---> 1/4 cup kerosene or gasoline
---> adhesive tape ! ---> lighter or small blow torch
! ---> glue
Procedure: !
1. drill a small hole in the top ! ****** note: make this in an ******
of the bulb near the threads ! ****** open area. Nasty FUMES******
2. carefully pour the black powder! ****** are given off. ******
into the hole...enough so that !
it begins to touch the filament! Procedure:
3. insert into socket as normal...! 1. heat kerosene/gasoline in a
4. get the hell out ! double boiler; melt soap chips
! ..stirring slowly. Put somewhere
When they turn this sucker on, glass! and allow to cool.
fragments fly like the devil...useful ! 2. heat the threads of the bulb
as an over-head fragmentation grenade.! VERY carefully to melt the glue.
______________________________________! Remove threads, slowly drawing
! out the filament..DONT BREAK THE
CHEAP ELECTRICAL IGNITERS ! FILAMENT OR THIS WONT WORK.
========================= ! 3. pour the liquid into the bulb,
! and slowly lower the filament
Materials: ! back down into the bulb; make
---> pack of 100 silicon diodes! sure the filament in dipped into
(available at radio shack;! the fluid.
you know you got the right! 4. re-glue the threads back on;
ones if they are very,very! insert into a socket frequently
small glass objects.) ! used by the intended victim...
---> pack of matches !
---> 1 candle ! When the victim flips the switch,
! they're in for a BIG SURPRISE!
Procedure: !________________________________________
1. light the candle and allow a large pool of molten wax to form in the
top.
2. take a single match and hold the glass part of a single diode against
the head....bend the wires around the head so that one wraps in an
upward direction and then sticks out to the side...do the same with
the other wire, but in a down ward direction. The diode should now be
hugging the match head, but its wires MUST NOT TOUCH EACH OTHER!!!!
3. dip the match head in wax to give it a water-proof coat (these work
under water)
4. repeat steps 1 - 3 to make as many as you want
How to use:
When these little dudes are hooked across a 6vDC battery, the diode reaches
what is called break-down voltage. When most electrical components reach this
voltage, they usually produce great ammounts of heat and light, while quickly
melting into a little blob. This heat is enough to ingite a match head. These
are recomended for use under water, where most other ingniters refuse to
work. Enjoy!
Guide to Civilian Warfare and Sabotage page: 4
HOME-BREW BLAST CANON
=====================
Materials:
---> 1 plastic drain pipe, 3 feet long, at least 3 1/2 inches in diameter
---> 1 smaller plastic pipe, about 6 inches long, 2 inches in diameter
---> 1 large lighter, w/ fluid refills (this gobbles it up)
---> 1 pipe cap to fit the large pipe, 1 pipe cap to fit the smaller pipe
---> 5 feet of bell wire
---> 1 SPST rocker switch
---> 1 6v polaroid potapulse battery
---> 1 5v relay (get this at radio shack)
---> electrical tape
---> one free afternoon
Procedure:
1. cut the bell wire into 3 equal pieces, and strip the ends
2. cut a hole in the side of the large pipe, the same diameter as the
small pipe; thread the hole and one end of the small pipe. They should
screw together easily.
3. take a piece of scrap metal, and bend it into an "L" shape, then
attach it to the lever on the lighter like so:
/----------- gas switch is here
________ V
/ \__-----\
! lighter ! ! <--- metal lever
! ! !
! !
Now, every time you pull the "trigger", gas should flow freely from
the lighter; you may need to enlarge the "gas port" on the lighter,
if you wish to be able to fire more rapidly.
4. connect 2 wires to the two posts on the switch
5. cut to holes in the side of the smaller tube, one for the switch on
the bottom, and one for the metal piece on top; then mount the switch
in the bottom, running the wires up and out the top; mount the
lighter/trigger in the top; now the switch should rock easily, and
the trigger should cause the lighter to pour out gas. Re-screw the
smaller tube into the larger one, hold own the trigger a bit, let it
go, and throw a match in there; if all goes well, you should get a
nice big "THUD!"
6. get hold of the relay, and take off the top:
1 ----------+
V
_/
2 --------/ <---- the center object is the metal
^ finger inside the relay
3 ----------+
CC
OO -------- 4
II
LL -------- 5
Guide to Civilian Warfare and Sabotage page: 5
Connect (1) to one of the wires comming from the switch; connect
(2) to (4), and connect (5) to one side of the battery; connect the
remaining wire from the switch to the other side of the battery;
now you should be able to get the relay to make a little "buzzing"
sound when you flip the switch and you should see some tiny little
sparks.
7. now, carefully mount the relay on the inside of the large pipe,
towards the back; screw on the smaller pipe; tape the battery to
the side of the canon barrel (yes, but looks arent everything)
8. you should now be able to let a little gas into the barrel and
set it off by flipping the switch.
9. put the cap on the back end of the large pipe VERY SECURELY. You
are now ready for the first trial-run.
To Test:
Put something very very large into the barrel, just so that in fits
"just right". Now, find a strong guy (the recoil will probably knock you
over if you arent careful). Put on a shoulder pad, and earmuffs, and
possibly some other protective clothing. Hold the trigger down for 30
seconds, hold on tight, and hit the switch. With luck and the proper
adjustments, you should be able to put a frozen orange through 1/4 plywood
at 25 feet. Have phun!
