PCI configuration registers:
Common header:
0x00: 0x104a8086 0x00100107 0x02000002 0x00000000
Vendor Name: Intel (0x8086)
Device Name: i82801H (AMT) LAN Controller (0x104a)
Command register: 0x0107
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): on
Fast back-to-back transactions: off
Interrupt disable: off
Status register: 0x0010
Interrupt status: inactive
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: fast (0x0)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: network (0x02)
Subclass Name: ethernet (0x00)
Interface: 0x00
Revision ID: 0x02
BIST: 0x00
Header Type: 0x00 (0x00)
Latency Timer: 0x00
Cache Line Size: 0bytes (0x00)
Base address register at 0x10
type: 32-bit nonprefetchable memory
base: 0xf0600000, not sized
Base address register at 0x14
type: 32-bit nonprefetchable memory
base: 0xf0624000, not sized
Base address register at 0x18
type: i/o
base: 0x00001000, not sized
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x103c
Subsystem ID: 0x2800
Expansion ROM Base Address: 0x00000000
Capability list pointer: 0xc8
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x02 (pin B)
Interrupt line: 0x0a
Capability register at 0xc8
type: 0x01 (Power Management)
Capability register at 0xd0
type: 0x05 (MSI)
PCI Power Management Capabilities Register
Capabilities register: 0xc822
Version: 1.1
PME# clock: off
Device specific initialization: on
3.3V auxiliary current: self-powered
D1 power management state support: off
D2 power management state support: off
PME# support D0: on
PME# support D1: off
PME# support D2: off
PME# support D3 hot: on
PME# support D3 cold: on
Control/status register: 0x2000
Power state: D0
PCI Express reserved: off
No soft reset: off
PME# assertion: disabled
PME# status: off
Bridge Support Extensions register: 0x00
B2/B3 support: off
Bus Power/Clock Control Enable: off
Data register: 0x0d
PCI Message Signaled Interrupt
Message Control register: 0x0081
MSI Enabled: on
Multiple Message Capable: no (1 vector)
Multiple Message Enabled: off (1 vector)
64 Bit Address Capable: on
Per-Vector Masking Capable: off
Message Address (lower) register: 0xfee00000
Message Address (upper) register: 0x00000000
Message Data register: 0x00000063