NetBSD 1.5R (BENCH) #1: Fri Feb  2 16:15:58 MET 2001
   fvdl@sushi:/work/trees/current/sys/arch/i386/compile/BENCH
cpu0: Intel Pentium (P54C) (586-class), 133.64 MHz
cpu0: features 3bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC>
total memory = 127 MB
avail memory = 113 MB
using 1659 buffers containing 6636 KB of memory
BIOS32 rev. 0 found at 0xfb4a0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82439HX System Controller (TXC) (rev. 0x03)
pcib0 at pci0 dev 7 function 0
pcib0: Intel 82371SB PCI-to-ISA Bridge (PIIX3) (rev. 0x01)
pciide0 at pci0 dev 7 function 1: Intel 82371SB IDE Interface (PIIX3) (rev. 0x00)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 32049H2>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at pciide0 channel 0 drive 1: <Maxtor 32049H2>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 19541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
wd2 at pciide0 channel 1 drive 0: <Maxtor 32049H2>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 19541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3 at pciide0 channel 1 drive 1: <Maxtor 32049H2>
wd3: drive supports 16-sector PIO transfers, LBA addressing
wd3: 19541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 40021632 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: secondary channel interrupting at irq 15
wd2(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
wd3(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
vga1 at pci0 dev 8 function 0: Tseng Labs ET6000 (rev. 0x30)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
ex0 at pci0 dev 9 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at irq 10
ex0: MAC address 00:a0:24:cb:69:be
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ne2 at pci0 dev 10 function 0: RealTek 8029 Ethernet
ne2: 10base2, 10baseT, 10baseT-FDX, auto, default [0x00 0x30] auto
ne2: Ethernet address 00:00:e8:7a:27:95
ne2: interrupting at irq 9
ahc1 at pci0 dev 12 function 0
ahc1: interrupting at irq 9
ahc1: Using left over BIOS settings
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1 channel 0: 16 targets, 8 luns per target
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
sb0 at isa0 port 0x220-0x237 irq 7 drq 1 drq2 5: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask eb65 netmask ef65 ttymask ff67
ahc1: Someone reset channel A
scsibus0: waiting 2 seconds for devices to settle...
WARNING: old BSD partition ID!
warning: double match for boot device (wd0, wd1)
warning: double match for boot device (wd0, wd2)
warning: double match for boot device (wd0, wd3)
WARNING: old BSD partition ID!
boot device: wd0
root on wd3a dumps on wd3b
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
WARNING: old BSD partition ID!
WARNING: old BSD partition ID!
WARNING: old BSD partition ID!

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.