Vendor Name: ATI Technologies (0x1002)
Device ID: 0x9552
Command register: 0x0007
I/O space accesses: on
Memory space accesses: on
Bus mastering: on
Special cycles: off
MWI transactions: off
Palette snooping: off
Parity error checking: off
Address/data stepping: off
System error (SERR): off
Fast back-to-back transactions: off
Interrupt disable: off
Status register: 0x0010
Interrupt status: inactive
Capability List support: on
66 MHz capable: off
User Definable Features (UDF) support: off
Fast back-to-back capable: off
Data parity error detected: off
DEVSEL timing: fast (0x0)
Slave signaled Target Abort: off
Master received Target Abort: off
Master received Master Abort: off
Asserted System Error (SERR): off
Parity error detected: off
Class Name: display (0x03)
Subclass Name: VGA (0x00)
Interface: 0x00
Revision ID: 0x00
BIST: 0x00
Header Type: 0x00+multifunction (0x80)
Latency Timer: 0x00
Cache Line Size: 64bytes (0x10)
Base address register at 0x10
type: 32-bit prefetchable memory
base: 0xc0000000, not sized
Base address register at 0x14
type: i/o
base: 0x00007000, not sized
Base address register at 0x18
type: 32-bit nonprefetchable memory
base: 0xd8400000, not sized
Base address register at 0x1c
not implemented(?)
Base address register at 0x20
not implemented(?)
Base address register at 0x24
not implemented(?)
Cardbus CIS Pointer: 0x00000000
Subsystem vendor ID: 0x103c
Subsystem ID: 0x7016
Expansion ROM Base Address: 0xfffe0000
Capability list pointer: 0x50
Reserved @ 0x38: 0x00000000
Maximum Latency: 0x00
Minimum Grant: 0x00
Interrupt pin: 0x01 (pin A)
Interrupt line: 0x0a
Capability register at 0x50
type: 0x01 (Power Management)
Capability register at 0x58
type: 0x10 (PCI Express)
Capability register at 0xa0
type: 0x05 (MSI)
PCI Power Management Capabilities Register
Capabilities register: 0x0603
Version: 1.2
PME# clock: off
Device specific initialization: off
3.3V auxiliary current: self-powered
D1 power management state support: on
D2 power management state support: on
PME# support D0: off
PME# support D1: off
PME# support D2: off
PME# support D3 hot: off
PME# support D3 cold: off
Control/status register: 0x0000
Power state: D0
PCI Express reserved: off
No soft reset: off
PME# assertion: disabled
PME# status: off
Bridge Support Extensions register: 0x00
B2/B3 support: off
Bus Power/Clock Control Enable: off
Data register: 0x00
PCI Message Signaled Interrupt
Message Control register: 0x0080
MSI Enabled: off
Multiple Message Capable: no (1 vector)
Multiple Message Enabled: off (1 vector)
64 Bit Address Capable: on
Per-Vector Masking Capable: off
Message Address (lower) register: 0x00000000
Message Address (upper) register: 0x00000000
Message Data register: 0x00000000
PCI Express Capabilities Register
Capability register: 0012
Capability version: 2
Device type: Legacy PCI Express Endpoint device
Slot implemented: off
Interrupt Message Number: 0
Device Capabilities Register: 0x012c8fa0
Max Payload Size Supported: 128 bytes max
Phantom Functions Supported: not available
Extended Tag Field Supported: 8bit
Endpoint L0 Acceptable Latency: 2us - 4us
Endpoint L1 Acceptable Latency: More than 64us
Attention Button Present: off
Attention Indicator Present: off
Power Indicator Present: off
Role-Based Error Report: on
Captured Slot Power Limit Value: 75
Captured Slot Power Limit Scale: 0
Function-Level Reset Capability: off
Device Control Register: 0x0810
Correctable Error Reporting Enable: off
Non Fatal Error Reporting Enable: off
Fatal Error Reporting Enable: off
Unsupported Request Reporting Enable: off
Enable Relaxed Ordering: on
Max Payload Size: 128 byte
Extended Tag Field Enable: off
Phantom Functions Enable: off
Aux Power PM Enable: off
Enable No Snoop: on
Max Read Request Size: 128 byte
Device Status Register: 0x0001
Correctable Error Detected: on
Non Fatal Error Detected: off
Fatal Error Detected: off
Unsupported Request Detected: off
Aux Power Detected: off
Transaction Pending: off
Link Capabilities Register: 0x00000d01
Maximum Link Speed: 2.5GT/s
Maximum Link Width: x16 lanes
Active State PM Support: L0s and L1 supported
L0 Exit Latency: Less than 64ns
L1 Exit Latency: Less than 1us
Port Number: 0
Clock Power Management: off
Surprise Down Error Report: off
Data Link Layer Link Active: off
Link BW Notification Capable: off
ASPM Optionally Compliance: off
Link Control Register: 0x0043
Active State PM Control: L0s and L1 Entry Enabled
Read Completion Boundary Control: 64bytes
Link Disable: off
Retrain Link: off
Common Clock Configuration: on
Extended Synch: off
Enable Clock Power Management: off
Hardware Autonomous Width Disable: off
Link Bandwidth Management Interrupt Enable: off
Link Autonomous Bandwidth Interrupt Enable: off
Link Status Register: 0x1101
Negotiated Link Speed: 2.5GT/s
Negotiated Link Width: x16 lanes
Training Error: off
Link Training: off
Slot Clock Configuration: on
Data Link Layer Link Active: off
Link Bandwidth Management Status: off
Link Autonomous Bandwidth Status: off
Device Capabilities 2: 0x00000000
Completion Timeout Ranges Supported: 0
Completion Timeout Disable Supported: off
ARI Forwarding Supported: off
AtomicOp Routing Supported: off
32bit AtomicOp Completer Supported: off
64bit AtomicOp Completer Supported: off
128-bit CAS Completer Supported: off
No RO-enabled PR-PR passing: off
LTR Mechanism Supported: off
TPH Completer Supported: 0
OBFF Supported: Not supported
Extended Fmt Field Supported: off
End-End TLP Prefix Supported: off
Max End-End TLP Prefixes: 0
Device Control 2: 0x0000
Completion Timeout Value: 50us to 50ms
Completion Timeout Disabled: off
ARI Forwarding Enabled: off
AtomicOp Rquester Enabled: off
AtomicOp Egress Blocking: off
IDO Request Enabled: off
IDO Completion Enabled: off
LTR Mechanism Enabled: off
OBFF: Disabled
End-End TLP Prefix Blocking on: off
Link Capabilities 2: 0x00000000
Supported Link Speed Vector:
Crosslink Supported: off
Link Control 2: 0x0001
Target Link Speed: 2.5GT/s
Enter Compliance Enabled: off
HW Autonomous Speed Disabled: off
Selectable De-emphasis: off
Transmit Margin: 0
Enter Modified Compliance: off
Compliance SOS: off
Compliance Present/De-emphasis: 0
Link Status 2: 0x0000
Current De-emphasis Level: off
Equalization Complete: off
Equalization Phase 1 Successful: off
Equalization Phase 2 Successful: off
Equalization Phase 3 Successful: off
Link Equalization Request: off
