Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009, 2010, 2011, 2012
   The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
   The Regents of the University of California.  All rights reserved.

NetBSD 6.99.5 (GENERIC) #0: Sun Apr 29 00:51:21 CEST 2012
       ahoka@desktop:/usr/build/obj/sys/arch/amd64/compile/GENERIC
total memory = 16103 MB
avail memory = 15620 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
To Be Filled By O.E.M. To Be Filled By O.E.M. (To Be Filled By O.E.M.)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, id 0x206a7
cpu1 at mainbus0 apid 2: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, id 0x206a7
cpu2 at mainbus0 apid 4: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, id 0x206a7
cpu3 at mainbus0 apid 6: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, id 0x206a7
ioapic0 at mainbus0 apid 0: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <ALASKA,   A M I,01072009>, AslId <AMI ,00010013>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
MCH (PNP0C01) at acpi0 not configured
SIO1 (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x43 irq 0
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
RMSC (PNP0C02) at acpi0 not configured
PCH (PNP0C01) at acpi0 not configured
CWDT (INT3F0D) at acpi0 not configured
acpiwmi0 at acpi0 (WMI1, PNP0C14-MXM2): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
RMEM (PNP0C01) at acpi0 not configured
OMSC (PNP0C02) at acpi0 not configured
attimer1: attached to pcppi1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0100 (rev. 0x09)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x0101 (rev. 0x09)
ppb0: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
genfb0 at pci1 dev 0 function 0: vendor 0x1002 product 0x6739 (rev. 0x00)
genfb0: framebuffer at 0xb0000000, size 1280x1024, depth 32, stride 5120
wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at genfb0 not configured
hdaudio0 at pci1 dev 0 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 17
hdafg0 at hdaudio0: ATI R6xx HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 32000Hz 44100Hz 48000Hz PCM16 AC3
genfb1 at pci0 dev 2 function 0: vendor 0x8086 product 0x0102 (rev. 0x09)
no width property
vendor 0x8086 product 0x1c3a (miscellaneous communications, revision 0x04) at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x1c2d (rev. 0x05)
ehci0: interrupting at ioapic0 pin 16
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
usb0 at ehci0: USB revision 2.0
hdaudio1 at pci0 dev 27 function 0: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 22
hdafg1 at hdaudio1: Realtek ALC892
hdafg1: DAC00 6ch: Speaker [Jack]
hdafg1: DAC01 2ch: HP Out [Jack]
hdafg1: DIG02 2ch: SPDIF Out [Jack]
hdafg1: ADC03 2ch: Line In [Jack], Mic In [Jack]
hdafg1: ADC04 2ch: Mic In [Jack]
hdafg1: 6ch/2ch 32000Hz 44100Hz 48000Hz 88200Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
hdafg2 at hdaudio1: Intel product 2805
hdafg2: DP00 8ch: Digital Out [Jack]
hdafg2: DP01 8ch: Digital Out [Jack]
hdafg2: DP02 8ch: Digital Out [Jack]
hdafg2: 8ch/0ch 48000Hz PCM16*
ppb1 at pci0 dev 28 function 0: vendor 0x8086 product 0x1c10 (rev. 0xb5)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 28 function 4: vendor 0x8086 product 0x1c18 (rev. 0xb5)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ahcisata0 at pci3 dev 0 function 0: vendor 0x1b4b product 0x9120 (rev. 0x12)
ahcisata0: interrupting at ioapic0 pin 16
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.0, 2 ports, 32 slots, CAP 0xe237ff21<SXS,PSC,SSC,PMD,FBSS,SPM,SAM,ISS=0x3=Gen3,SAL,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ppb3 at pci0 dev 28 function 5: vendor 0x8086 product 0x1c1a (rev. 0xb5)
ppb3: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b6f product 0x7023 (USB serial bus, interface 0x30, revision 0x01) at pci4 dev 0 function 0 not configured
ppb4 at pci0 dev 28 function 6: vendor 0x8086 product 0x1c1c (rev. 0xb5)
ppb4: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1b6f product 0x7023 (USB serial bus, interface 0x30, revision 0x01) at pci5 dev 0 function 0 not configured
ppb5 at pci0 dev 28 function 7: vendor 0x8086 product 0x1c1e (rev. 0xb5)
ppb5: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci6 dev 0 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb6: PCI Express 2.0 <Upstream Port of PCI-E Switch>
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
ppb7 at pci7 dev 1 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb7: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci7 dev 4 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb8: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
ppb9 at pci9 dev 0 function 0: vendor 0x1b21 product 0x1080 (rev. 0x01)
ppb9: PCI Express 1.0 <PCI-E to PCI/PCI-X Bridge>
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled, rd/line, wr/inv ok
rtk0 at pci10 dev 1 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 16
rtk0: Ethernet address 00:15:e9:f1:51:cd
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb10 at pci7 dev 5 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb10: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci11 at ppb10 bus 11
pci11: i/o space, memory space enabled, rd/line, wr/inv ok
fwohci0 at pci11 dev 0 function 0: vendor 0x1106 product 0x3403 (rev. 0x01)
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:8f:13:00:11:38:0e:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
ppb11 at pci7 dev 6 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb11: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci12 at ppb11 bus 12
pci12: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci12 dev 0 function 0: Broadcom BCM57781 Fast Ethernet
bge0: interrupting at ioapic0 pin 17
bge0: adjust device control 0x192800 -> 0x195800
bge0: ASIC unknown BCM57765 (0x57785100), Ethernet address 00:25:22:cc:21:ae
bge0: setting short Tx thresholds
ukphy0 at bge0 phy 1: OUI 0x001be9, model 0x0024, rev. 4
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb12 at pci7 dev 7 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb12: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci13 at ppb12 bus 13
pci13: i/o space, memory space enabled, rd/line, wr/inv ok
ppb13 at pci7 dev 8 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb13: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci14 at ppb13 bus 14
pci14: i/o space, memory space enabled, rd/line, wr/inv ok
ppb14 at pci7 dev 9 function 0: vendor 0x10b5 product 0x8608 (rev. 0xba)
ppb14: PCI Express 2.0 <Downstream Port of PCI-E Switch>
pci15 at ppb14 bus 15
pci15: i/o space, memory space enabled, rd/line, wr/inv ok
ehci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x1c26 (rev. 0x05)
ehci1: interrupting at ioapic0 pin 23
ehci1: BIOS has given up ownership
ehci1: EHCI version 1.0
usb1 at ehci1: USB revision 2.0
pcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x1c44 (rev. 0x05)
ahcisata1 at pci0 dev 31 function 2: vendor 0x8086 product 0x1c02 (rev. 0x05)
ahcisata1: interrupting at ioapic0 pin 19
ahcisata1: 64-bit DMA
ahcisata1: AHCI revision 1.30, 6 ports, 32 slots, CAP 0xe730ff45<EMS,PSC,SSC,PMD,ISS=0x3=Gen3,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus2 at ahcisata1 channel 0
atabus3 at ahcisata1 channel 1
atabus4 at ahcisata1 channel 2
atabus5 at ahcisata1 channel 3
atabus6 at ahcisata1 channel 4
atabus7 at ahcisata1 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x1c22 (rev. 0x05)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat   1 us, pow  1000 mW
acpicpu0: C3: FFH, lat 104 us, pow   350 mW, bus master check
acpicpu0: P0: FFH, lat  10 us, pow 95000 mW, 3301 MHz, turbo boost
acpicpu0: P1: FFH, lat  10 us, pow 95000 mW, 3300 MHz
acpicpu0: P2: FFH, lat  10 us, pow 87000 mW, 3100 MHz
acpicpu0: P3: FFH, lat  10 us, pow 80000 mW, 2900 MHz
acpicpu0: P4: FFH, lat  10 us, pow 72000 mW, 2700 MHz
acpicpu0: P5: FFH, lat  10 us, pow 66000 mW, 2500 MHz
acpicpu0: P6: FFH, lat  10 us, pow 59000 mW, 2300 MHz
acpicpu0: P7: FFH, lat  10 us, pow 53000 mW, 2100 MHz
acpicpu0: P8: FFH, lat  10 us, pow 47000 mW, 1900 MHz
acpicpu0: P9: FFH, lat  10 us, pow 41000 mW, 1700 MHz
acpicpu0: P10: FFH, lat  10 us, pow 38000 mW, 1600 MHz
acpicpu0: T0: FFH, lat   1 us, pow  1000 mW, 100 %
acpicpu0: T1: FFH, lat   1 us, pow   875 mW,  88 %
acpicpu0: T2: FFH, lat   1 us, pow   750 mW,  75 %
acpicpu0: T3: FFH, lat   1 us, pow   625 mW,  63 %
acpicpu0: T4: FFH, lat   1 us, pow   500 mW,  50 %
acpicpu0: T5: FFH, lat   1 us, pow   375 mW,  38 %
acpicpu0: T6: FFH, lat   1 us, pow   250 mW,  25 %
acpicpu0: T7: FFH, lat   1 us, pow   125 mW,  13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution
acpicpu2 at cpu2: ACPI CPU
coretemp2 at cpu2: thermal sensor, 1 C resolution
acpicpu3 at cpu3: ACPI CPU
coretemp3 at cpu3: thermal sensor, 1 C resolution
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 3292701800 Hz quality 3000
uhub0 at usb0: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ahcisata1 port 0: device present, speed: 3.0Gb/s
ahcisata1 port 1: device present, speed: 3.0Gb/s
ahcisata1 port 2: device present, speed: 1.5Gb/s
wd0 at atabus2 drive 0
wd0: <ST3500320AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1 at atabus3 drive 0
wd1: <ST3500320AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 465 GB, 969021 cyl, 16 head, 63 sec, 512 bytes/sect x 976773168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata1:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus4: 1 targets
cd0 at atapibus0 drive 0: <ASUS    DRW-24B3LT, B5D0CL361405, 1.00> cdrom removable
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
cd0(ahcisata1:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
uhub2 at uhub0 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub2: single transaction translator
uhub3 at uhub1 port 1: vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2
uhub3: single transaction translator
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: vendor 0x0461 Pleomax Wired Laser Mouse, rev 2.00/1.00, addr 3, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir
wsmouse0 at ums0 mux 0
uhub4 at uhub3 port 2: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/2.00, addr 4
uhub4: 3 ports with 2 removable, bus powered
uhidev1 at uhub4 port 1 configuration 1 interface 0
uhidev1: Dell Dell USB Keyboard, rev 1.10/2.00, addr 5, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub4 port 1 configuration 1 interface 1
uhidev2: Dell Dell USB Keyboard, rev 1.10/2.00, addr 5, iclass 3/0
uhidev2: 3 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev2 reportid 3: input=3, output=0, feature=0
uhub5 at uhub3 port 4: vendor 0x0424 product 0x2514, class 9/0, rev 2.00/b.b3, addr 6
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd1
root on wd1a dumps on wd1b
root file system type: ffs
cd0(ahcisata1:2:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
    ASC/ASCQ:  Medium Not Present - Tray Closed

wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)
cd0(ahcisata1:2:0):  Check Condition on CDB: 0x00 00 00 00 00 00
   SENSE KEY:  Not Ready
    ASC/ASCQ:  Medium Not Present - Tray Closed

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.