There are two ways to boot NetBSD kernel on your LUNA.
- network boot using "isiboot"
- place NetBSD kernel on the root directory of the LUNA original disk
Because there is no provision of installation kernel tailored to
run in standalone with the help of memory disk, either way requires
to prepare an initial filesystem on an NFS server.
o Preparing filesystem to NFS mount
NetBSD/luna68k is a cousin of various m68k port of NetBSD. Any
set of m68k distribution is useful to run NetBSD/luna68k with minor
adjustments as described below.
Inflate two files, base.tgz and etc.tgz, to the NFS server. Then
replace two files, 'etc/ttys' and 'dev/MAKEDEV', with ones found
in ~ftp/NetBSD/luna68k/ directory of NetBSD ftp servers. Make sure
to run 'sh ./MAKEDEV all' in dev/ directory.
o Preparing BOOTP/DHCP network service
NetBSD kernel requests its network parameters and NFS mount point.
You need to know its station address (Ethernet MAC address), which
can be found using ROM monitor (see how to do).
Here is the sample configuration of /etc/bootptab;
LUNA ROM monitor can download kernel image via network. 'isiboot'
serves this purpose. The server program requires BPF (Berkeley
Packet Filter) in the servicing machine to work. The source code
of 'isiboot' can be found ~ftp/NetBSD/arch/luna68k/ directory of
NetBSD ftp servers. The description is here.
DESCRIPTION
isiboot is a server which supports LUNA network boot. It listens
to ROM monitor download requests and serves for it. The proprietary
protocol uses a special Ethernet type and works within a local wire.
-i <interface> isiboot searchs available network interfaces and
chooses one found first. If the servicing machine has multiple
network interfaces in action, this option can be used to specify
which network interface to use.
-s <directory> whose directory isiboot server makes chroot(2)
to after invocation. Given no provision, isiboot searchs the
downloading files in the current directory when started.
-d <tracelevel> accepts value 1, 2 or 3. Greater number provides
more detailed trace.
The protocol uses server's hostname to start the downloading
dialogue. isiboot makes the name using gethostname(3) trimmed
down by the first dot '.' if applicable.
[1] Invoke isiboot program on the root directory of NetBSD/luna68k
filesystem on NFS server. Use -s option when necessary.
[2] Manipulate LUNA ROM monitor as follows;
Given '> ' ROM monitor prompt;
>[k] start to change boot parameters,
ctlr: dk [et] specify network boot,
home: omron type a return, isiboot doesn't care this field,
sver: servername type another return,
fnam: server:/vmunix [pelican:netbsd]
specify server hostname and the filename
to download. Leading / is not significant.
Then type 'g' ROM monitor command to start downloading. You will see
the progress like;
>[g]
text(776872)+data(49788)+bss(131942)
When completed, type 'x' ROM monitor command with '-s' string to
run NetBSD kernel. -s specifies not to start multiuser mode.
>[x -s]
The kernel starts to configure itself, and requests BOOTP/DHCP on
wire to get network parameters and the name of filesystem to mount.
After receving a proper reply, NetBSD/luna68k kernel invokes single
user mode shell eventually.
o Booting from disk
NetBSD/luna68k kernel can be booted off from the vender supplied
original operating system. Place kernel image on the root directory,
then type to ROM monitor as follows;
>[k]
ctlr: dk type just a return to make no change,
drv: 0 return,
par: c and another return,
fnam: vmunix [netbsd]
specify the name of NetBSD/luna68k kernel.
>[g] load the kernel image from disk. Litting
front panel LED tells activity.
>[x -sa] run the kernel, where -sa instructs to ask
which filesystem to mount.
Now, tells kernel to mount filesystem provided by NFS server;
boot device: sd0
root device (default on sd0a): [le0] le0 to use NFS
dump device: return to choose default
filesystem (default generic): another return to choose
Then kernel requests BOOTP/DHCP for network parameters and its root
directory, and eventually invokes single user mode shell when successful.
o Installing NetBSD/luna68k on disk
NetBSD 'sysinst' utility is not prepared for NetBSD/luna68k. Here
is the instruction for manual installation.
It's reasonable and prefered to make fresh filesystems from scratch.
Vender supplied OS has such a rather obscure convention to keep
its root filesystem on partition c that's not comfortable with
NetBSD standard. Use disklabel(8) command to make the new filesystem
layout.
LUNA ROM monitor can search and load kernel images on the root
filesystem. To make this possible, the root filesystem must be
created in the 'old FFS' format. Make sure to have -O (large letter
oh) for newfs(8). Other filesystems do not require the option.
Then mount the root filesystem somewhere, say /mnt, and other
filesystems for usr/ or var/ underneath it. If you have NetBSD
distribution sets on a certain NFS mounted point, goto the directory
and then issue a simple loop;
# for i in *.tgz
do
(cd /mnt && tar xvfp - ) < $i
done
When completed, make sure to place NetBSD/luna68k kernel image on
/mnt directory and to replace two files, etc/ttys and dev/MAKEDEV.
Run 'sh ./MAKEDEV all' on /mnt/dev/ directory to have device nodes.
It's ok to halt the system now by typing 'halt' for # prompt.
o Arrange ROM boot parameters for daily use
>[k]
ctlr: dk type just a return to make no change,
drv: 0 another return,
par: c [a] change to choose 'a' partion to load,
fnam: vmunix [netbsd]
>[k+] store those into NVRAM