/* $NetBSD: init_ericsson.c,v 1.3 2015/06/16 23:04:14 christos Exp $ */
/*-
* Copyright (c) 2008 Iain Hibbert
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* init information in this file gleaned from hciattach(8)
* command from BlueZ for Linux - see
http://www.bluez.org/
*/
#include <sys/cdefs.h>
__RCSID("$NetBSD: init_ericsson.c,v 1.3 2015/06/16 23:04:14 christos Exp $");
#include <bluetooth.h>
#include <err.h>
#include <errno.h>
#include <stdlib.h>
#include <termios.h>
#include "btattach.h"
void
init_ericsson(int fd, unsigned int speed)
{
uint8_t rate;
switch(speed) {
case B460800: rate = 0x00; break;
case B230400: rate = 0x01; break;
case B115200: rate = 0x02; break;
case B57600: rate = 0x03; break;
case B28800: rate = 0x04; break;
case B14400: rate = 0x05; break;
case B7200: rate = 0x06; break;
#if defined(B3600)
case B3600: rate = 0x07; break;
#endif
case B1800: rate = 0x08; break;
#if defined(B900)
case B900: rate = 0x09; break;
#endif
#if defined(B153600)
case B153600: rate = 0x10; break;
#endif
case B76800: rate = 0x11; break;
case B38400: rate = 0x12; break;
case B19200: rate = 0x13; break;
case B9600: rate = 0x14; break;
case B4800: rate = 0x15; break;
case B2400: rate = 0x16; break;
case B1200: rate = 0x17; break;
case B600: rate = 0x18; break;
case B300: rate = 0x19; break;
case B921600: rate = 0x20; break;
case 200000: rate = 0x25; break;
case 300000: rate = 0x27; break;
case 400000: rate = 0x2b; break;
default:
errx(EXIT_FAILURE, "invalid speed for ericsson: %u", speed);
}
uart_send_cmd(fd, HCI_CMD_ERICSSON_SET_UART_BAUD_RATE, &rate, sizeof(rate));
/* wait for response? */
/* assume it succeeded? */
}
