# $NetBSD: t_woptions.sh,v 1.2 2020/09/08 06:11:32 mrg Exp $
#
# Copyright (c) 2020 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by Jukka Ruohonen.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
# These tests play around with the wifi configuration on a system
# which may not be safe, destroy configuration or hang.
check_ifconfig_tests_enabled() {
if [ "${ATF_SBIN_IFCONFIG_WIFI_ENABLE}" != "yes" ]; then
atf_skip "Test triggers real device activity and may destroy configuration or hang."
fi
}
atf_test_case chan
chan_head() {
atf_set "require.user" "root"
atf_set "descr" "Test with ifconfig(8) that setting " \
"802.11 channels does not panic (PR kern/55424)"
}
chan_body() {
check_ifconfig_tests_enabled
# This sequence covers both valid and invalid channels.
# Different 802.11 modes are not taken into account, and
# all interfaces are tested, including non-802.11 ones.
#
chans=$(seq 1 500)
pkill -9 hostapd
pkill -9 wpa_supplicant
for i in $(ifconfig -l); do
if [ ! -z "$(echo $i | grep urtwn)" ]; then
echo "Skipping $i (PR kern/55424)"
continue
fi
state="up"
ifconfig -s $i
if [ $? -eq 1 ]; then
state="down"
fi
m=""
mm=$(ifconfig $i | grep "chan")
if [ ! -z "$mm" ]; then
m=$(echo $mm | awk {'print $2'})
fi
atf_test_case mediaopt
mediaopt_head() {
atf_set "require.user" "root"
atf_set "descr" "Test with ifconfig(8) that setting " \
"802.11 media options does not panic (PR kern/35045)"
}
mediaopt_body() {
check_ifconfig_tests_enabled
# Again, also non-802.11 interfaces are tested.
#
opts="adhoc monitor hostap"
atf_test_case modes
modes_head() {
atf_set "require.user" "root"
atf_set "descr" "Test with ifconfig(8) that setting " \
"802.11 modes does not panic (PR kern/45745)"
}
modes_body() {
check_ifconfig_tests_enabled
# Although 11n is not yet supported, the system
# should not panic from invalid input parameters.
# Therefore, the following will try to also set
# the four 802.11 modes for non-802.11 devices.
#
modes="11a 11b 11g 11n"
pkill -9 hostapd
pkill -9 wpa_supplicant
for i in $(ifconfig -l); do
m=""
mm=$(ifconfig $i | grep "media")
for j in $modes; do
match=$(echo $mm | grep $j)
if [ ! -z "$match" ]; then
m=$j
break
fi
done
for j in $modes; do
echo "Request: $i -> 802.11 mode $j"
ifconfig $i mode $j >/dev/null 2>&1
done
if [ ! -z $m ]; then
ifconfig $i mode $m >/dev/null 2>&1
echo "Restored the mode of $i to $m"
fi
done
