#       $NetBSD: t_bridge.sh,v 1.21 2024/09/03 08:01:38 ozaki-r Exp $
#
# Copyright (c) 2014 The NetBSD Foundation, Inc.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

SOCK1=unix://commsock1
SOCK2=unix://commsock2
SOCK3=unix://commsock3
IP1=10.0.0.1
IP2=10.0.0.2
IP61=fc00::1
IP62=fc00::2
IPBR1=10.0.0.11
IPBR2=10.0.0.12
IP6BR1=fc00::11
IP6BR2=fc00::12

DEBUG=${DEBUG:-false}
TIMEOUT=5

setup_endpoint()
{
       sock=${1}
       addr=${2}
       bus=${3}
       mode=${4}

       rump_server_add_iface $sock shmif0 $bus
       export RUMP_SERVER=${sock}
       if [ $mode = "ipv6" ]; then
               atf_check -s exit:0 rump.ifconfig shmif0 inet6 ${addr}
       else
               atf_check -s exit:0 rump.ifconfig shmif0 inet ${addr} netmask 0xffffff00
       fi

       atf_check -s exit:0 rump.ifconfig shmif0 up
       $DEBUG && rump.ifconfig shmif0
}

test_endpoint()
{
       sock=${1}
       addr=${2}
       bus=${3}
       mode=${4}

       export RUMP_SERVER=${sock}
       atf_check -s exit:0 -o match:shmif0 rump.ifconfig
       if [ $mode = "ipv6" ]; then
               atf_check -s exit:0 -o ignore rump.ping6 -n -c 1 -X $TIMEOUT ${addr}
       else
               atf_check -s exit:0 -o ignore rump.ping -n -w $TIMEOUT -c 1 ${addr}
       fi
}

test_setup()
{
       test_endpoint $SOCK1 $IP1 bus1 ipv4
       test_endpoint $SOCK3 $IP2 bus2 ipv4

       export RUMP_SERVER=$SOCK2
       atf_check -s exit:0 -o match:shmif0 rump.ifconfig
       atf_check -s exit:0 -o match:shmif1 rump.ifconfig
}

test_setup6()
{
       test_endpoint $SOCK1 $IP61 bus1 ipv6
       test_endpoint $SOCK3 $IP62 bus2 ipv6

       export RUMP_SERVER=$SOCK2
       atf_check -s exit:0 -o match:shmif0 rump.ifconfig
       atf_check -s exit:0 -o match:shmif1 rump.ifconfig
}

setup_bridge_server()
{

       rump_server_add_iface $SOCK2 shmif0 bus1
       rump_server_add_iface $SOCK2 shmif1 bus2
       export RUMP_SERVER=$SOCK2
       atf_check -s exit:0 rump.ifconfig shmif0 up
       atf_check -s exit:0 rump.ifconfig shmif1 up
}

setup()
{

       rump_server_start $SOCK1 bridge
       rump_server_start $SOCK2 bridge
       rump_server_start $SOCK3 bridge

       setup_endpoint $SOCK1 $IP1 bus1 ipv4
       setup_endpoint $SOCK3 $IP2 bus2 ipv4
       setup_bridge_server
}

setup6()
{

       rump_server_start $SOCK1 netinet6 bridge
       rump_server_start $SOCK2 netinet6 bridge
       rump_server_start $SOCK3 netinet6 bridge

       setup_endpoint $SOCK1 $IP61 bus1 ipv6
       setup_endpoint $SOCK3 $IP62 bus2 ipv6
       setup_bridge_server
}

setup_bridge()
{
       export RUMP_SERVER=$SOCK2
       rump_server_add_iface $SOCK2 bridge0
       atf_check -s exit:0 rump.ifconfig bridge0 up

       export LD_PRELOAD=/usr/lib/librumphijack.so
       atf_check -s exit:0 /sbin/brconfig bridge0 add shmif0
       atf_check -s exit:0 /sbin/brconfig bridge0 add shmif1
       /sbin/brconfig bridge0
       unset LD_PRELOAD
       rump.ifconfig shmif0
       rump.ifconfig shmif1
}

setup_member_ip()
{
       export RUMP_SERVER=$SOCK2
       export LD_PRELOAD=/usr/lib/librumphijack.so
       atf_check -s exit:0 rump.ifconfig shmif0 $IPBR1/24
       atf_check -s exit:0 rump.ifconfig shmif1 $IPBR2/24
       atf_check -s exit:0 rump.ifconfig -w 10
       /sbin/brconfig bridge0
       unset LD_PRELOAD
       rump.ifconfig shmif0
       rump.ifconfig shmif1
}

setup_member_ip6()
{
       export RUMP_SERVER=$SOCK2
       export LD_PRELOAD=/usr/lib/librumphijack.so
       atf_check -s exit:0 rump.ifconfig shmif0 inet6 $IP6BR1
       atf_check -s exit:0 rump.ifconfig shmif1 inet6 $IP6BR2
       atf_check -s exit:0 rump.ifconfig -w 10
       /sbin/brconfig bridge0
       unset LD_PRELOAD
       rump.ifconfig shmif0
       rump.ifconfig shmif1
}

teardown_bridge()
{
       export RUMP_SERVER=$SOCK2
       export LD_PRELOAD=/usr/lib/librumphijack.so
       /sbin/brconfig bridge0
       atf_check -s exit:0 /sbin/brconfig bridge0 delete shmif0
       atf_check -s exit:0 /sbin/brconfig bridge0 delete shmif1
       /sbin/brconfig bridge0
       unset LD_PRELOAD
       rump.ifconfig shmif0
       rump.ifconfig shmif1
}

test_setup_bridge()
{
       export RUMP_SERVER=$SOCK2
       export LD_PRELOAD=/usr/lib/librumphijack.so
       atf_check -s exit:0 -o match:shmif0 /sbin/brconfig bridge0
       atf_check -s exit:0 -o match:shmif1 /sbin/brconfig bridge0
       /sbin/brconfig bridge0
       unset LD_PRELOAD
}

down_up_interfaces()
{
       export RUMP_SERVER=$SOCK1
       rump.ifconfig shmif0 down
       rump.ifconfig shmif0 up
       export RUMP_SERVER=$SOCK3
       rump.ifconfig shmif0 down
       rump.ifconfig shmif0 up
}

test_ping_failure()
{
       export RUMP_SERVER=$SOCK1
       atf_check -s not-exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP2
       export RUMP_SERVER=$SOCK3
       atf_check -s not-exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP1
}

test_ping_success()
{
       export RUMP_SERVER=$SOCK1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP2
       rump.ifconfig -v shmif0

       export RUMP_SERVER=$SOCK3
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IP1
       rump.ifconfig -v shmif0
}

test_ping6_failure()
{
       export RUMP_SERVER=$SOCK1
       atf_check -s not-exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP62
       export RUMP_SERVER=$SOCK3
       atf_check -s not-exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP61
}

test_ping6_success()
{
       export RUMP_SERVER=$SOCK1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP62
       rump.ifconfig -v shmif0

       export RUMP_SERVER=$SOCK3
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -c 1 -X $TIMEOUT $IP61
       rump.ifconfig -v shmif0
}

test_ping_member()
{
       export RUMP_SERVER=$SOCK1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR1
       rump.ifconfig -v shmif0
       # Test for PR#48104
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR2
       rump.ifconfig -v shmif0

       export RUMP_SERVER=$SOCK3
       rump.ifconfig -v shmif0
       # Test for PR#48104
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping -q -n -w $TIMEOUT -c 1 $IPBR2
       rump.ifconfig -v shmif0
}

test_ping6_member()
{
       export RUMP_SERVER=$SOCK1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR1
       rump.ifconfig -v shmif0
       # Test for PR#48104
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR2
       rump.ifconfig -v shmif0

       export RUMP_SERVER=$SOCK3
       rump.ifconfig -v shmif0
       # Test for PR#48104
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR1
       rump.ifconfig -v shmif0
       atf_check -s exit:0 -o ignore rump.ping6 -q -n -X $TIMEOUT -c 1 $IP6BR2
       rump.ifconfig -v shmif0
}

test_create_destroy()
{

       rump_server_start $SOCK1 bridge

       test_create_destroy_common $SOCK1 bridge0
}

test_ipv4()
{
       setup
       test_setup

       # Enable once PR kern/49219 is fixed
       #test_ping_failure

       setup_bridge
       sleep 1
       test_setup_bridge
       test_ping_success

       teardown_bridge
       test_ping_failure

       rump_server_destroy_ifaces
}

test_ipv6()
{
       setup6
       test_setup6

       test_ping6_failure

       setup_bridge
       sleep 1
       test_setup_bridge
       test_ping6_success

       teardown_bridge
       test_ping6_failure

       rump_server_destroy_ifaces
}

test_member_ipv4()
{
       setup
       test_setup

       # Enable once PR kern/49219 is fixed
       #test_ping_failure

       setup_bridge
       sleep 1
       test_setup_bridge
       test_ping_success

       setup_member_ip
       test_ping_member

       teardown_bridge
       test_ping_failure

       rump_server_destroy_ifaces
}

test_member_ipv6()
{
       setup6
       test_setup6

       test_ping6_failure

       setup_bridge
       sleep 1
       test_setup_bridge
       test_ping6_success

       setup_member_ip6
       test_ping6_member

       teardown_bridge
       test_ping6_failure

       rump_server_destroy_ifaces
}

BUS_SHMIF0=./bus0
BUS_SHMIF1=./bus1
BUS_SHMIF2=./bus2

unpack_file()
{

       atf_check -s exit:0 uudecode $(atf_get_srcdir)/${1}.uue
}

reset_if_stats()
{

       for ifname in shmif0 shmif1 shmif2
       do
               atf_check -s exit:0 -o ignore rump.ifconfig -z $ifname
       done
}

test_protection()
{

       unpack_file unicast.pcap
       unpack_file broadcast.pcap

       rump_server_start $SOCK1 bridge
       rump_server_add_iface $SOCK1 shmif0 $BUS_SHMIF0
       rump_server_add_iface $SOCK1 shmif1 $BUS_SHMIF1
       rump_server_add_iface $SOCK1 shmif2 $BUS_SHMIF2

       export RUMP_SERVER=$SOCK1
       atf_check -s exit:0 rump.ifconfig shmif0 up
       atf_check -s exit:0 rump.ifconfig shmif1 up
       atf_check -s exit:0 rump.ifconfig shmif2 up

       atf_check -s exit:0 rump.ifconfig bridge0 create
       atf_check -s exit:0 rump.ifconfig bridge0 up

       atf_check -s exit:0 $HIJACKING brconfig bridge0 add shmif0 add shmif1 add shmif2
       $DEBUG && rump.ifconfig

       # Protected interfaces: -
       # Learning: -
       # Input: unicast through shmif0
       # Output: shmif1, shmif2
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin unicast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       # Protected interfaces: -
       # Learning: -
       # Input: broadcast through shmif0
       # Output: shmif1, shmif2
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin broadcast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       # Protect shmif0 and shmif2
       atf_check -s exit:0 $HIJACKING brconfig bridge0 protect shmif0
       atf_check -s exit:0 $HIJACKING brconfig bridge0 protect shmif2
       atf_check -s exit:0 \
           -o match:"shmif0.+PROTECTED" \
           -o match:"shmif2.+PROTECTED" \
           -o not-match:"shmif1.+PROTECTED" \
           $HIJACKING brconfig bridge0

       # Protected interfaces: shmif0 shmif2
       # Learning: -
       # Input: unicast through shmif0
       # Output: shmif1
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin unicast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 0 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       # Protected interfaces: shmif0 shmif2
       # Learning: -
       # Input: broadcast through shmif0
       # Output: shmif1
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin broadcast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 0 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       # Insert a route 00:aa:aa:aa:aa:aa shmif2 to test forwarding path of known-unicast-frame
       atf_check -s exit:0 $HIJACKING brconfig bridge0 static shmif2 00:aa:aa:aa:aa:aa
       atf_check -s exit:0 -o match:'00:aa:aa:aa:aa:aa shmif2 0 flags=1<STATIC>' \
           $HIJACKING brconfig bridge0
       $DEBUG && $HIJACKING brconfig bridge0

       # Protected interfaces: shmif0 shmif2
       # Learning: 00:aa:aa:aa:aa:aa shmif2
       # Input: broadcast through shmif0
       # Output: -
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin unicast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 0 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 0 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       # Unprotect shmif2
       atf_check -s exit:0 $HIJACKING brconfig bridge0 -protect shmif2
       atf_check -s exit:0 \
           -o match:"shmif0.+PROTECTED" \
           -o not-match:"shmif2.+PROTECTED" \
           -o not-match:"shmif1.+PROTECTED" \
           $HIJACKING brconfig bridge0

       # Protected interfaces: shmif0
       # Learning: 00:aa:aa:aa:aa:aa shmif2
       # Input: broadcast through shmif0
       # Output: shmif2
       reset_if_stats
       atf_check -s exit:0 -o ignore shmif_pcapin unicast.pcap ${BUS_SHMIF0}
       atf_check -s exit:0 -o match:"input: 1 packet" rump.ifconfig -v shmif0
       atf_check -s exit:0 -o match:"output: 0 packet" rump.ifconfig -v shmif1
       atf_check -s exit:0 -o match:"output: 1 packet" rump.ifconfig -v shmif2
       $DEBUG && rump.ifconfig -v bridge0

       rump_server_destroy_ifaces
}

add_test()
{
       local name=$1
       local desc="$2"

       atf_test_case "bridge_${name}" cleanup
       eval "bridge_${name}_head() {
                       atf_set descr \"${desc}\"
                       atf_set require.progs rump_server
               }
           bridge_${name}_body() {
                       test_${name}
               }
           bridge_${name}_cleanup() {
                       \$DEBUG && dump
                       cleanup
               }"
       atf_add_test_case "bridge_${name}"
}

atf_init_test_cases()
{

       add_test create_destroy "Tests creating/destroying bridge interfaces"
       add_test ipv4           "Does basic if_bridge tests (IPv4)"
       add_test ipv6           "Does basic if_bridge tests (IPv6)"
       add_test member_ipv4    "Tests if_bridge with members with an IP address (IPv4)"
       add_test member_ipv6    "Tests if_bridge with members with an IP address (IPv6)"
       add_test protection     "Tests interface protection"
}

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.