/* $NetBSD: auvitekreg.h,v 1.1 2010/12/27 15:42:11 jmcneill Exp $ */
/*-
* Copyright (c) 2010 Jared D. McNeill <
[email protected]>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _AUVITEKREG_H
#define _AUVITEKREG_H
#define AU0828_CMD_REQUEST_IN 0x00
#define AU0828_CMD_REQUEST_OUT 0x01
#define AU0828_REG_GPIO1_OUTEN 0x0000
#define AU0828_REG_GPIO2_OUTEN 0x0001
#define AU0828_REG_GPIO1_PINDIR 0x0002
#define AU0828_REG_GPIO2_PINDIR 0x0003
#define AU0828_REG_SENSOR_CTL 0x0100
#define AU0828_REG_SENSORVBI_CTL 0x0103
#define AU0828_REG_HPOS_LO 0x0110
#define AU0828_REG_HPOS_HI 0x0111
#define AU0828_REG_VPOS_LO 0x0112
#define AU0828_REG_VPOS_HI 0x0113
#define AU0828_REG_HRES_LO 0x0114
#define AU0828_REG_HRES_HI 0x0115
#define AU0828_REG_VRES_LO 0x0116
#define AU0828_REG_VRES_HI 0x0117
#define AU0828_REG_I2C_TRIGGER 0x0200
#define AU0828_I2C_TRIGGER_WR 0x01
#define AU0828_I2C_TRIGGER_RD 0x20
#define AU0828_I2C_TRIGGER_HOLD 0x40
#define AU0828_REG_I2C_STATUS 0x0201
#define AU0828_I2C_STATUS_RD_DONE 0x01
#define AU0828_I2C_STATUS_NO_RD_ACK 0x02
#define AU0828_I2C_STATUS_WR_DONE 0x04
#define AU0828_I2C_STATUS_NO_WR_ACK 0x08
#define AU0828_I2C_STATUS_BUSY 0x10
#define AU0828_REG_I2C_CLKDIV 0x0202
#define AU0828_I2C_CLKDIV_250 0x07
#define AU0828_I2C_CLKDIV_100 0x14
#define AU0828_I2C_CLKDIV_30 0x40
#define AU0828_REG_I2C_DSTADDR 0x0203
#define AU0828_REG_I2C_FIFOWR 0x0205
#define AU0828_REG_I2C_FIFORD 0x0209
#define AU0828_REG_I2C_MBMODE 0x02ff
#define AU0828_REG_AUDIOCTL 0x050c
#define AU0828_REG_POWER_CTL 0x0600
#define AU0828_POWER_EN 0x10
#endif /* !_AUVITEKREG_H */
