/*
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kbd.c 8.2 (Berkeley) 10/30/93
*/
/*
* /dev/kbd lower layer for sun keyboard off a tty (line discipline).
* This driver uses kbdsun middle layer to hook up to /dev/kbd.
*/
/****************************************************************
* Interface to the lower layer (ttycc)
****************************************************************/
static int sunkbd_match(device_t, cfdata_t, void *);
static void sunkbd_attach(device_t, device_t, void *);
static void sunkbd_write_data(struct kbd_sun_softc *, int);
static int sunkbdiopen(device_t, int mode);
/* Set up the proper line discipline. */
if (ttyldisc_attach(&sunkbd_disc) != 0)
panic("sunkbd_attach: sunkbd_disc");
ttyldisc_release(tp->t_linesw);
tp->t_linesw = ttyldisc_lookup(sunkbd_disc.l_name);
KASSERT(tp->t_linesw == &sunkbd_disc);
tp->t_oflag &= ~OPOST;
tp->t_dev = args->kmta_dev;
SET(tp->t_state, TS_KERN_ONLY);
/* link the structures together. */
k->k_priv = tp;
tp->t_sc = k;
/* provide our middle layer with a link to the lower layer (i.e. us) */
k->k_deviopen = sunkbdiopen;
k->k_deviclose = NULL;
k->k_write_data = sunkbd_write_data;
/* provide upper layer with a link to our middle layer */
k->k_kbd.k_ops = &kbd_ops_sun;
/*
* Internal open routine. This really should be inside com.c
* But I'm putting it here until we have a generic internal open
* mechanism.
*/
int
sunkbdiopen(device_t dev, int flags)
{
struct kbd_sun_softc *k = device_private(dev);
struct tty *tp = k->k_priv;
struct lwp *l = curlwp ? curlwp : &lwp0;
struct termios t;
int error;
/* Open the lower device */
CLR(tp->t_state, TS_KERN_ONLY);
if ((error = cdev_open(tp->t_dev, O_NONBLOCK|flags,
0/* ignored? */, l)) != 0)
return (error);
/* Now configure it for the console. */
tp->t_ospeed = 0;
t.c_ispeed = sunkbd_bps;
t.c_ospeed = sunkbd_bps;
t.c_cflag = CLOCAL|CS8;
(*tp->t_param)(tp, &t);
SET(tp->t_state, TS_KERN_ONLY);
return (0);
}
/*
* TTY interface to handle input.
*/
int
sunkbdinput(int c, struct tty *tp)
{
struct kbd_sun_softc *k = tp->t_sc;
int error;
/*
* Handle exceptional conditions (break, parity, framing).
*/
if ((error = ((c & TTY_ERRORMASK))) != 0) {
/*
* After garbage, flush pending input, and
* send a reset to resync key translation.
*/
log(LOG_ERR, "%s: input error (0x%x)\n",
device_xname(k->k_kbd.k_dev), c);
c &= TTY_CHARMASK;
if (!(k->k_txflags & K_TXBUSY)) {
ttyflush(tp, FREAD | FWRITE);
goto send_reset;
}
}