/*      $NetBSD: scsi_scanner.h,v 1.11 2005/12/11 12:23:50 christos Exp $       */

/*
* Copyright (c) 1995 Kenneth Stailey.  All rights reserved.
*   modified for configurable scanner support by Joachim Koenig
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
*    must display the following acknowledgement:
*      This product includes software developed by Kenneth Stailey.
* 4. The name of the author may not be used to endorse or promote products
*    derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*
* SCSI scanner interface description
*/

/* SCSI scanner commands */
#define GET_IMAGE_STATUS        0x0f
#define READ_10                 0x28
#define WRITE_10                0x2a
#define OBJECT_POSITION         0x31
#define GET_BUFFER_STATUS       0x34

/* generic scanner command formats */

struct scsi_rw_scanner {
#define READ                    0x08
#define WRITE                   0x0a
       u_int8_t opcode;
       u_int8_t byte2;
#define SRW_FIXED               0x01
       u_int8_t len[3];
       u_int8_t control;
};

struct scsi_set_window {
#define SET_WINDOW              0x24 /* set params of image area and windows */
#define GET_WINDOW              0x25
       u_int8_t opcode;
       u_int8_t byte2;
       u_int8_t reserved[4];
       u_int8_t len[3];
       u_int8_t control;
};

struct scsi_window_header {
       u_int8_t reserved[6];
       u_int8_t len[2];
};

struct scsi_window_data {
       u_int8_t window_id;         /* must be zero */
       u_int8_t res1:7;
       u_int8_t auto_bit:1;
       u_int8_t x_res[2];
       u_int8_t y_res[2];
       u_int8_t x_org[4];
       u_int8_t y_org[4];
       u_int8_t width[4];
       u_int8_t length[4];
       u_int8_t brightness;
       u_int8_t threshold;
       u_int8_t contrast;
       u_int8_t image_comp;        /* image composition (data type) */
       u_int8_t bits_per_pixel;
       u_int8_t halftone_pattern[2];
       u_int8_t rif:1;             /* reverse image format (mono negative) */
       u_int8_t res2:4;
       u_int8_t pad_type:3;
       u_int8_t bit_ordering[2];
       u_int8_t compression_type;
       u_int8_t compression_arg;
       u_int8_t res3[6];
};

/* mustek scsi commands */

#define MUSTEK_SET_WINDOW       0x04    /* set image area and windows */
#define MUSTEK_ADF              0x10    /* ADF and backtracking selection */
#define MUSTEK_LUT              0x55    /* look up table download */