/*      $NetBSD: gtmpscreg.h,v 1.5 2016/01/15 12:09:15 joerg Exp $      */

/*
* Copyright (c) 2002 Allegro Networks, Inc., Wasabi Systems, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
*    must display the following acknowledgement:
*      This product includes software developed for the NetBSD Project by
*      Allegro Networks, Inc., and Wasabi Systems, Inc.
* 4. The name of Allegro Networks, Inc. may not be used to endorse
*    or promote products derived from this software without specific prior
*    written permission.
* 5. The name of Wasabi Systems, Inc. may not be used to endorse
*    or promote products derived from this software without specific prior
*    written permission.
*
* THIS SOFTWARE IS PROVIDED BY ALLEGRO NETWORKS, INC. AND
* WASABI SYSTEMS, INC. ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL EITHER ALLEGRO NETWORKS, INC. OR WASABI SYSTEMS, INC.
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/

/*
* gtmpscreg.h - register defines for GT-64260 MPSC
*
* creation     Sun Apr  8 11:49:57 PDT 2001    cliff
*/

#ifndef _GTMPSCREG_H
#define _GTMPSCREG_H

#define GTMPSC_BASE(u)  (MPSC0_BASE + ((u) << 12))
#define GTMPSC_SIZE     0x1000

#define GTMPSC_NCHAN    2               /* Number of MPSC channels */

/*******************************************************************************
*
* MPSC register address offsets relative to the base mapping
*/
#define GTMPSC_MMCR_LO  0x000           /* MPSC Main Config Register Low */
#define GTMPSC_MMCR_HI  0x004           /* MPSC Main Config Register High */
#define GTMPSC_MPCR     0x008           /* MPSC Protocol Config Register */
#define GTMPSC_CHR_BASE 0x008           /* MPSC Channel Register Base */
#define GTMPSC_CHRN(n)  (GTMPSC_CHR_BASE + ((n) << 2))
#define GTMPSC_NCHR     11              /* CHR 1-11? */

#define GTMPSC_MRR      0xb400          /* MPSC Routing Register */
#define GTMPSC_RCRR     0xb404          /* MPSC RX Clock Routing Register */
#define GTMPSC_TCRR     0xb408          /* MPSC TX Clock Routing Register */


/*******************************************************************************
*
* MPSC register values & bit defines
*
*      values are provided for UART mode only
*/
/*
* MPSC Routing Register bits
*/
#define GTMPSC_MRR_PORT0        0               /* serial port #0 */
#define GTMPSC_MRR_NONE         7               /* unconnected */
                                               /* all other "routes" resvd. */
#define GTMPSC_MRR_MR0_MASK     __BITS(2,0)     /* routing mask for MPSC0 */
#define GTMPSC_MRR_RESa         __BITS(5,3)
#define GTMPSC_MRR_MR1_MASK     __BITS(8,6)     /* routing mask for MPSC1 */
#define GTMPSC_MRR_RESb         __BITS(30,9)
#define GTMPSC_MRRE_DSC         __BIT(31)       /* "Don't Stop Clock" */
#define GTMPSC_MRR_RES (GTMPSC_MRR_RESa|GTMPSC_MRR_RESb)
/*
* MPSC Clock Routing Register bits
* the bitfields and route definitions are common for RCRR and TCRR
* except for MPSC_TCRR_TSCLK0
*/
#define GTMPSC_CRR_BRG0         0x0             /* Baud Rate Generator #0 */
#define GTMPSC_CRR_BRG1         0x1             /* Baud Rate Generator #1 */
#define GTMPSC_CRR_BRG2         0x2             /* Baud Rate Generator #2 */
#define GTMPSC_CRR_SCLK0        0x8             /* SCLK0 */
#define GTMPSC_TCRR_TSCLK0      0x9             /* TSCLK0 (for TCRR only) */
                                               /* all other values resvd. */
#define GTMPSC_CRR(u, v)        ((v) << GTMPSC_CRR_SHIFT(u))
#define GTMPSC_CRR_SHIFT(u)     ((u) * 8)
#define GTMPSC_CRR_MASK         0xf
#define GTMPSC_CRR_RESa         __BITS(7,4)
#define GTMPSC_CRR_RESb         __BITS(31,12)
#define GTMPSC_CRR_RES (GTMPSC_CRR_RESa|GTMPSC_CRR_RESb)
/*
* MPSC Main Configuration Register LO bits
*/
#define GTMPSC_MMCR_LO_MODE_MASK __BITS(2,0)
#define GTMPSC_MMCR_LO_MODE_UART (0x4 << 0)     /* UART mode */
#define GTMPSC_MMCR_LO_TTX       __BIT(3)       /* Transparent TX */
#define GTMPSC_MMCR_LO_TRX       __BIT(4)       /* Transparent RX */
#define GTMPSC_MMCR_LO_RESa      __BIT(5)
#define GTMPSC_MMCR_LO_ET        __BIT(6)       /* Enable TX */
#define GTMPSC_MMCR_LO_ER        __BIT(7)       /* Enable RX */
#define GTMPSC_MMCR_LO_LPBK_MASK __BITS(9,8)    /* Loop Back */
#define GTMPSC_MMCR_LO_LPBK_NONE (0 << 8)       /* Normal (non-loop) */
#define GTMPSC_MMCR_LO_LPBK_LOOP (1 << 8)       /* Loop Back */
#define GTMPSC_MMCR_LO_LPBK_ECHO (2 << 8)       /* Echo */
#define GTMPSC_MMCR_LO_LPBK_LBE (3 << 8)        /* Loop Back and Echo */
#define GTMPSC_MMCR_LO_NLM      __BIT(10)       /* Null Modem */
#define GTMPSC_MMCR_LO_RESb     __BIT(11)
#define GTMPSC_MMCR_LO_TSYN     __BIT(12)       /* Transmitter sync to Rcvr. */
#define GTMPSC_MMCR_LO_RESc     __BIT(13)
#define GTMPSC_MMCR_LO_TSNS_MASK __BITS(15,14)  /* Transmit Sense */
#define GTMPSC_MMCR_LO_TSNS_INF (0 << 14)       /* Infinite */
#define GTMPSC_MMCR_LO_TIDL     __BIT(16)       /* TX Idles */
#define GTMPSC_MMCR_LO_RTSM     __BIT(17)       /* RTS Mode */
#define GTMPSC_MMCR_LO_RESd     __BIT(18)
#define GTMPSC_MMCR_LO_CTSS     __BIT(19)       /* CTS Sampling mode */
#define GTMPSC_MMCR_LO_CDS      __BIT(20)       /* CD Sampling mode */
#define GTMPSC_MMCR_LO_CTSM     __BIT(21)       /* CTS operating Mode */
#define GTMPSC_MMCR_LO_CDM      __BIT(22)       /* CD operating Mode */
#define GTMPSC_MMCR_LO_CRCM_MASK __BITS(25,23)  /* CRC Mode */
#define GTMPSC_MMCR_LO_CRCM_NONE (0 << 23)      /* CRC Mode */
#define GTMPSC_MMCR_LO_RESe     __BITS(27,26)
#define GTMPSC_MMCR_LO_TRVD     __BIT(28)       /* Transmit Reverse Data */
#define GTMPSC_MMCR_LO_RRVD     __BIT(29)       /* Receive  Reverse Data */
#define GTMPSC_MMCR_LO_RESf     __BIT(30)
#define GTMPSC_MMCR_LO_GDE      __BIT(31)       /* Glitch Detect Enable */
#define GTMPSC_MMCR_LO_RES \
               (GTMPSC_MMCR_LO_RESa|GTMPSC_MMCR_LO_RESb|GTMPSC_MMCR_LO_RESc \
               |GTMPSC_MMCR_LO_RESd|GTMPSC_MMCR_LO_RESe|GTMPSC_MMCR_LO_RESf)
/*
* MPSC Main Configuration Register HI bits
*/
#define GTMPSC_MMCR_HI_TCI       __BIT(0)       /* TX Clock Invert */
#define GTMPSC_MMCR_HI_TINV      __BIT(1)       /* TX Bitstream Inversion */
#define GTMPSC_MMCR_HI_TPL       __BITS(4,2)    /* TX Preable Length */
#define GTMPSC_MMCR_HI_TPL_NONE  0              /* no TX Preable (default) */
#define GTMPSC_MMCR_HI_TPL_16    (6 << 2)       /* 16 byte preamble */
#define GTMPSC_MMCR_HI_TPPT_MASK __BITS(8,5)    /* TX Preable Pattern */
#define GTMPSC_MMCR_HI_TPPT_NONE (0 << 5)       /* TX Preable Pattern */
#define GTMPSC_MMCR_HI_TCDV_MASK __BITS(10,9)   /* TX Clock Divide */
#define GTMPSC_MMCR_HI_TCDV_1X   (0 << 9)       /* 1x clock mode */
#define GTMPSC_MMCR_HI_TCDV_8X   (1 << 9)       /* 8x clock mode */
#define GTMPSC_MMCR_HI_TCDV_16X  (2 << 9)       /* 16x clock mode */
#define GTMPSC_MMCR_HI_TCDV_32X  (3 << 9)       /* 32x clock mode */
#define GTMPSC_MMCR_HI_TDEC_MASK __BITS(13,11)  /* TX Encoder */
#define GTMPSC_MMCR_HI_TDEC_NRZ  (0 << 9)       /* NRZ (default) */
#define GTMPSC_MMCR_HI_TDEC_NRZI (1 << 9)       /* NRZI (mark) */
#define GTMPSC_MMCR_HI_TDEC_FM0  (2 << 9)       /* FM0 */
#define GTMPSC_MMCR_HI_TDEC_MAN  (4 << 9)       /* Manchester */
#define GTMPSC_MMCR_HI_TDEC_DMAN (6 << 9)       /* Differential Manchester */
                                               /* all other values rsvd. */
#define GTMPSC_MMCR_HI_RESa     __BITS(15,14)
#define GTMPSC_MMCR_HI_RINV     __BIT(16)       /* RX Bitstream Inversion */
#define GTMPSC_MMCR_HI_GDW      __BITS(20,17)   /* Clock Glitch Width */
#define GTMPSC_MMCR_HI_RESb     __BIT(21)
#define GTMPSC_MMCR_HI_RDW      __BIT(22)       /* Reveive Data Width */
#define GTMPSC_MMCR_HI_RSYL_MASK  __BITS(24,23) /* Reveive Sync Width */
#define GTMPSC_MMCR_HI_RSYL_EXT   (0 << 23)     /* External sync */
#define GTMPSC_MMCR_HI_RSYL_4BIT  (1 << 23)     /* 4-bit sync */
#define GTMPSC_MMCR_HI_RSYL_8BIT  (2 << 23)     /* 8-bit sync */
#define GTMPSC_MMCR_HI_RSYL_16BIT (3 << 23)     /* 16-bit sync */
#define GTMPSC_MMCR_HI_RCDV_MASK __BITS(26,25)  /* Receive Clock Divider */
#define GTMPSC_MMCR_HI_RCDV_1X   (0 << 25)      /* 1x clock mode (default) */
#define GTMPSC_MMCR_HI_RCDV_8X   (1 << 25)      /* 8x clock mode (default) */
#define GTMPSC_MMCR_HI_RCDV_16X  (2 << 25)      /* 16x clock mode (default) */
#define GTMPSC_MMCR_HI_RCDV_32X  (3 << 25)      /* 16x clock mode (default) */
#define GTMPSC_MMCR_HI_RENC_MASK __BITS(29,27)  /* Receive Encoder */
#define GTMPSC_MMCR_HI_RENC_NRZ (0 << 27)       /* NRZ (default) */
#define GTMPSC_MMCR_HI_RENC_NRZI (1 << 27)      /* NRZI */
#define GTMPSC_MMCR_HI_RENC_FM0 (2 << 27)       /* FM0 */
#define GTMPSC_MMCR_HI_RENC_MAN (4 << 27)       /* Manchester */
#define GTMPSC_MMCR_HI_RENC_DMAN (6 << 27)      /* Differential Manchester */
                                               /* all other values rsvd. */
#define GTMPSC_MMCR_HI_SEDG_MASK __BITS(31,30)  /* Sync Clock Edge */
#define GTMPSC_MMCR_HI_SEDG_BOTH (0 << 30)      /* rising and falling (dflt) */
#define GTMPSC_MMCR_HI_SEDG_RISE (1 << 30)      /* rising edge */
#define GTMPSC_MMCR_HI_SEDG_FALL (2 << 30)      /* falling edge */
#define GTMPSC_MMCR_HI_SEDG_NONE (3 << 30)      /* no adjustment */
/*
* SDMAx Command/Status Register bits for UART Mode, RX
*
* XXX these belong in sdmareg.h ?
*/
#define SDMA_CSR_RX_PE          __BIT(0)        /* Parity Error */
#define SDMA_CSR_RX_CDL         __BIT(1)        /* Carrier Detect Loss */
#define SDMA_CSR_RX_RESa        __BIT(2)
#define SDMA_CSR_RX_FR          __BIT(3)        /* Framing Error */
#define SDMA_CSR_RX_RESb        __BITS(5,4)
#define SDMA_CSR_RX_OR          __BIT(6)        /* Data Overrun */
#define SDMA_CSR_RX_RESc        __BITS(8,7)
#define SDMA_CSR_RX_BR          __BIT(9)        /* Break Received */
#define SDMA_CSR_RX_MI          __BIT(10)       /* Max Idle */
#define SDMA_CSR_RX_ADDR        __BIT(11)       /* Address */
#define SDMA_CSR_RX_AMATCH      __BIT(12)       /* Address match */
#define SDMA_CSR_RX_CT          __BIT(13)       /* Transparency Control char */
#define SDMA_CSR_RX_C           __BIT(14)       /* Control char */
#define SDMA_CSR_RX_ES          __BIT(15)       /* Error Summary */
#define SDMA_CSR_RX_L           __BIT(16)       /* Last */
#define SDMA_CSR_RX_F           __BIT(17)       /* First */
#define SDMA_CSR_RX_RESd        __BITS(22,18)
#define SDMA_CSR_RX_EI          __BIT(23)       /* Enable Interrupt */
#define SDMA_CSR_RX_RESe        __BITS(29,24)
#define SDMA_CSR_RX_AUTO        __BIT(30)       /* Auto Mode */
#define SDMA_CSR_RX_OWN         __BIT(31)       /* Owner */
#define SDMA_CSR_RX_RES (SDMA_CSR_RX_RESa|SDMA_CSR_RX_RESb|SDMA_CSR_RX_RESc \
                        |SDMA_CSR_RX_RESd|SDMA_CSR_RX_RESe)
/*
* SDMAx Command/Status Register bits for UART Mode, TX
*/
#define SDMA_CSR_TX_RESa        __BIT(0)
#define SDMA_CSR_TX_CTSL        __BIT(1)        /* CTS Loss */
#define SDMA_CSR_TX_RESb        __BITS(14,2)
#define SDMA_CSR_TX_ES          __BIT(15)       /* Error Summary */
#define SDMA_CSR_TX_L           __BIT(16)       /* Last */
#define SDMA_CSR_TX_F           __BIT(17)       /* First */
#define SDMA_CSR_TX_P           __BIT(18)       /* Preamble */
#define SDMA_CSR_TX_ADDR        __BIT(19)       /* Address */
#define SDMA_CSR_TX_NS          __BIT(20)       /* No Stop Bit */
#define SDMA_CSR_TX_RESc        __BITS(22,21)
#define SDMA_CSR_TX_EI          __BIT(23)       /* Enable Interrupt */
#define SDMA_CSR_TX_RESd        __BITS(29,24)
#define SDMA_CSR_TX_AUTO        __BIT(30)       /* Auto Mode */
#define SDMA_CSR_TX_OWN         __BIT(31)       /* Owner */
#define SDMA_CSR_TX_RES \
       (SDMA_CSR_TX_RESa|SDMA_CSR_TX_RESb|SDMA_CSR_TX_RESc|SDMA_CSR_TX_RESd)
/*
* MPSCx Protocol Configuration Register for UART Mode
*/
#define GTMPSC_MPCR_RESa        __BITS(5,0)
#define GTMPSC_MPCR_DRT         __BIT(6)        /* Disable Rx on Tx */
#define GTMPSC_MPCR_ISO         __BIT(7)        /* Isochronous Mode */
#define GTMPSC_MPCR_RZS         __BIT(8)        /* Rx Zero Stop Bit(s) */
#define GTMPSC_MPCR_FRZ         __BIT(9)        /* Freeze Tx */
#define GTMPSC_MPCR_UM_MASK     __BITS(11,10)   /* UART Mode mask */
#define GTMPSC_MPCR_UM_NORM     (0 << 10)       /* Normal UART Mode */
#define GTMPSC_MPCR_UM_MDROP    (1 << 10)       /* Multi-Drop UART Mode */
                                               /* other values are resvd. */
#define GTMPSC_MPCR_CLMASK      __BITS(13,12)   /* Character Length mask */
#define GTMPSC_MPCR_CL_5        (0 << 12)       /* 5 data bits */
#define GTMPSC_MPCR_CL_6        (1 << 12)       /* 6 data bits */
#define GTMPSC_MPCR_CL_7        (2 << 12)       /* 7 data bits */
#define GTMPSC_MPCR_CL_8        (3 << 12)       /* 8 data bits */
#define GTMPSC_MPCR_SBL_1       (0 << 14)       /* 1 stop bit */
#define GTMPSC_MPCR_SBL_2       (1 << 14)       /* 2 stop bits */
#define GTMPSC_MPCR_FLC_NORM    0x0             /* Normal Flow Ctl mode */
#define GTMPSC_MPCR_FLC_ASYNC   __BIT(15)       /* Asynchronous Flow Ctl mode */
#define GTMPSC_MPCR_RESb        __BITS(31,16)
#define GTMPSC_MPCR_RES (GTMPSC_MPCR_RESa|GTMPSC_MPCR_RESb)
/*
* MPSC Channel Register 1 for UART Mode "Break/Stuff"
*/
#define GTMPSC_CHR1_TCS         __BITS(7,0)     /* Constrol Stuff Character */
#define GTMPSC_CHR1_BRK         __BITS(23,16)   /* Break Count */
#define GTMPSC_CHR1_RES         __BITS(15,8)|__BITS(31,24)
/*
* MPSC Channel Register 2 for UART Mode "Command"
*/
#define GTMPSC_CHR2_RESa        __BIT(0)
#define GTMPSC_CHR2_TEV         __BIT(1)        /* Tx Enb. Vert. Redundancy  */
#define GTMPSC_CHR2_TPM_MASK    __BITS(3,2)     /* Tx Parity Mode mask */
#define GTMPSC_CHR2_TPM_ODD     (0 << 2)        /* Odd Tx Parity */
#define GTMPSC_CHR2_TPM_LOW     (1 << 2)        /* Low (always 0) Tx Parity */
#define GTMPSC_CHR2_TPM_EVEN    (2 << 2)        /* Even Tx Parity */
#define GTMPSC_CHR2_TPM_HIGH    (3 << 2)        /* High (always 1) Tx Parity */
#define GTMPSC_CHR2_RESb        __BITS(6,4)
#define GTMPSC_CHR2_TXABORT     __BIT(7)        /* Tx Abort */
#define GTMPSC_CHR2_RESc        __BIT(8)
#define GTMPSC_CHR2_TCS         __BIT(9)        /* Tx TCS Char */
#define GTMPSC_CHR2_RESd        __BITS(16,10)
#define GTMPSC_CHR2_REC         __BIT(17)       /* Rx Enb. Vert. Redundancy */
#define GTMPSC_CHR2_RPM_MASK    __BITS(19,18)   /* Rx Parity Mode mask */
#define GTMPSC_CHR2_RPM_ODD     (0 << 18)       /* Odd Rx Parity */
#define GTMPSC_CHR2_RPM_LOW     (1 << 18)       /* Low (always 0) Rx Parity */
#define GTMPSC_CHR2_RPM_EVEN    (2 << 18)       /* Even Rx Parity */
#define GTMPSC_CHR2_RPM_HIGH    (3 << 18)       /* High (always 1) Rx Parity */
#define GTMPSC_CHR2_RESe        __BITS(22,20)
#define GTMPSC_CHR2_RXABORT     __BIT(23)       /* Rx Abort */
#define GTMPSC_CHR2_RESf        __BIT(24)
#define GTMPSC_CHR2_CRD         __BIT(25)       /* Close RX Descriptor */
#define GTMPSC_CHR2_RESg        __BITS(30,26)
#define GTMPSC_CHR2_EH          __BIT(31)       /* Enter Hunt */
#define GTMPSC_CHR2_RES \
               (GTMPSC_CHR2_RESa|GTMPSC_CHR2_RESb|GTMPSC_CHR2_RESc| \
                GTMPSC_CHR2_RESd|GTMPSC_CHR2_RESe|GTMPSC_CHR2_RESf| \
                GTMPSC_CHR2_RESg)
/*
* MPSC Channel Register 3 for UART Mode "Max Idle"
*/
#define GTMPSC_CHR3_MIR         __BITS(15,0)    /* Max Idle Char count */
#define GTMPSC_CHR3_RES         __BITS(31,16)
/*
* MPSC Channel Register 4 for UART Mode "Control Filtering"
*/
#define GTMPSC_CHR4_CFR         __BITS(7,0)     /* Control bit compare enable */
#define GTMPSC_CHR4_RES         __BITS(31,8)
/*
* MPSC Channel Registers 5..8 for UART Mode "UART Control Character"
*
* NOTE: two 16 bit CHRCC fields exist in each of Channel Registers 5..8
*/
#define GTMPSC_CHRCC_SHIFT      16
#define GTMPSC_CHRCC_CHAR       __BITS(7,0)     /* the control character */
#define GTMPSC_CHRCC_RES        __BITS(11,8)
#define GTMPSC_CHRCC_INT        __BIT(12)       /* Interrupt */
#define GTMPSC_CHRCC_CO         __BIT(13)       /* ISO 3309 Control Octet */
#define GTMPSC_CHRCC_R          __BIT(14)       /* Reject */
#define GTMPSC_CHRCC_V          __BIT(15)       /* Valid */
/*
* MPSC Channel Register 9 for UART Mode "Address" (for multidrop operation)
*/
#define GTMPSC_CHR9_AD1         __BITS(7,0)     /* address #1 */
#define GTMPSC_CHR9_RESa        __BITS(14,8)
#define GTMPSC_CHR9_MODE1       __BIT(15)       /* mode #1 */
#define GTMPSC_CHR9_AD2         __BITS(23,16)   /* address #2 */
#define GTMPSC_CHR9_RESb        __BITS(30,24)
#define GTMPSC_CHR9_MODE2       __BIT(31)       /* mode #2 */
#define GTMPSC_CHR9_RES (GTMPSC_CHR9_RESa|GTMPSC_CHR9_RESb)
/*
* MPSC Channel Register 10 for UART Mode "Event Status"
*/
#define GTMPSC_CHR10_CTS        __BIT(0)        /* Clear To Send */
#define GTMPSC_CHR10_CD         __BIT(1)        /* Carrier Detect */
#define GTMPSC_CHR10_RESa       __BIT(2)
#define GTMPSC_CHR10_TIDLE      __BIT(3)        /* Tx in Idle State */
#define GTMPSC_CHR10_RESb       __BIT(4)
#define GTMPSC_CHR10_RHS        __BIT(5)        /* Rx in HUNT State */
#define GTMPSC_CHR10_RESc       __BIT(6)
#define GTMPSC_CHR10_RLS        __BIT(7)        /* Rx Line STatus */
#define GTMPSC_CHR10_RESd       __BITS(10,8)
#define GTMPSC_CHR10_RLIDL      __BIT(11)       /* Rx IDLE Line */
#define GTMPSC_CHR10_RESe       __BITS(15,12)
#define GTMPSC_CHR10_RCRn       __BITS(23,16)   /* Received Control Char # */
#define GTMPSC_CHR10_RESf       __BITS(31,24)
#define GTMPSC_CHR10_RES \
               (GTMPSC_CHR10_RESa|GTMPSC_CHR10_RESb|GTMPSC_CHR10_RESc \
               |GTMPSC_CHR10_RESd|GTMPSC_CHR10_RESe|GTMPSC_CHR10_RESf)


#endif  /* _GTMPSCREG_H */