/* $OpenBSD: fins.c,v 1.1 2008/03/19 19:33:09 deraadt Exp $ */
/* $NetBSD: finsio_isa.c,v 1.9 2022/06/29 15:56:58 mlelstv Exp $ */
/*
* Copyright (c) 2008 Juan Romero Pardines
* Copyright (c) 2007, 2008 Geoff Steckel
* Copyright (c) 2005, 2006 Mark Kettenis
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: finsio_isa.c,v 1.9 2022/06/29 15:56:58 mlelstv Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <dev/isa/isareg.h>
#include <dev/isa/isavar.h>
#include <dev/sysmon/sysmonvar.h>
/* Derived from LM78 code. Only handles chips attached to ISA bus */
/*
* Fintek F71805/F71883 Super I/O datasheets:
*
http://www.fintek.com.tw/files/productfiles/F71805F_V025.pdf
*
http://www.fintek.com.tw/files/productfiles/F71883_V026P.pdf
*
* This chip is a multi-io chip with many functions.
* Each function may be relocated in I/O space by the BIOS.
* The base address (2E or 4E) accesses a configuration space which
* has pointers to the individual functions. The config space must be
* unlocked with a cookie and relocked afterwards. The chip ID is stored
* in config space so it is not normally visible.
*
* The voltage dividers specified are from reading the chips on one board.
* There is no way to determine what they are in the general case.
*/
#define FINSIO_UNLOCK 0x87 /* magic constant - write 2x to select chip */
#define FINSIO_LOCK 0xaa /* magic constant - write 1x to deselect reg */
#define FINSIO_FUNC_SEL 0x07 /* select which subchip to access */
# define FINSIO_FUNC_HWMON 0x4
/* ISA registers index to an internal register space on chip */
#define FINSIO_DECODE_SIZE (8)
#define FINSIO_DECODE_MASK (FINSIO_DECODE_SIZE - 1)
#define FINSIO_ADDR 5 /* global configuration index */
#define FINSIO_DATA 6 /* and data registers */
/* Global configuration registers */
#define FINSIO_MANUF 0x23 /* manufacturer ID */
# define FINTEK_ID 0x1934
#define FINSIO_CHIP 0x20 /* chip ID */
# define FINSIO_IDF71805 0x0406
# define FINSIO_IDF71806 0x0341 /* F71872 and F1806 F/FG */
# define FINSIO_IDF71883 0x0541 /* F71882 and F1883 */
# define FINSIO_IDF71862 0x0601 /* F71862FG */
# define FINSIO_IDF8000 0x0581 /* F8000 */
/* in bank sensors of config space */
#define FINSIO_SENSADDR 0x60 /* sensors assigned I/O address (2 bytes) */
#define FINSIO_HWMON_CONF 0x01 /* Hardware Monitor Config. Register */
/* in sensors space */
#define FINSIO_TMODE 0x01 /* temperature mode reg */
#define FINSIO_MAX_SENSORS 20
/*
* Fintek chips typically measure voltages using 8mv steps.
* To measure higher voltages the input is attenuated with (external)
* resistors. Negative voltages are measured using inverting op amps
* and resistors. So we have to convert the sensor values back to
* real voltages by applying the appropriate resistor factor.
*/
#define FRFACT_NONE 8000
#define FRFACT(x, y) (FRFACT_NONE * ((x) + (y)) / (y))
#define FNRFACT(x, y) (-FRFACT_NONE * (x) / (y))
#if defined(FINSIODEBUG)
#define DPRINTF(x) do { printf x; } while (0)
#else
#define DPRINTF(x)
#endif
struct finsio_softc {
bus_space_tag_t sc_iot;
bus_space_handle_t sc_ioh;
struct sysmon_envsys *sc_sme;
envsys_data_t sc_sensor[FINSIO_MAX_SENSORS];
struct finsio_sensor *sc_finsio_sensors;
u_int sc_tempsel;
};
struct finsio_sensor {
const char *fs_desc;
u_int fs_type;
uint8_t fs_aux;
uint8_t fs_reg;
void (*fs_refresh)(struct finsio_softc *, envsys_data_t *);
int fs_rfact;
};
static int finsio_isa_match(device_t, cfdata_t, void *);
static void finsio_isa_attach(device_t, device_t, void *);
static int finsio_isa_detach(device_t, int);
static void finsio_enter(bus_space_tag_t, bus_space_handle_t);
static void finsio_exit(bus_space_tag_t, bus_space_handle_t);
static uint8_t finsio_readreg(bus_space_tag_t, bus_space_handle_t, int);
static void finsio_writereg(bus_space_tag_t, bus_space_handle_t, int, int);
static void finsio_refresh(struct sysmon_envsys *, envsys_data_t *);
static void finsio_refresh_volt(struct finsio_softc *, envsys_data_t *);
static void finsio_refresh_temp(struct finsio_softc *, envsys_data_t *);
static void finsio_refresh_fanrpm(struct finsio_softc *, envsys_data_t *);
CFATTACH_DECL_NEW(finsio, sizeof(struct finsio_softc),
finsio_isa_match, finsio_isa_attach, finsio_isa_detach, NULL);
/* Sensors available in F71805/F71806 */
static struct finsio_sensor f71805_sensors[] = {
/* Voltage */
{
.fs_desc = "+3.3V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x10,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(100, 100)
},
{
.fs_desc = "Vtt",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x11,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT_NONE
},
{
.fs_desc = "Vram",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x12,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(100, 100)
},
{
.fs_desc = "Vchips",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x13,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(47, 100)
},
{
.fs_desc = "+5V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x14,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
{
.fs_desc = "+12V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x15,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 20)
},
{
.fs_desc = "Vcc 1.5V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x16,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT_NONE
},
{
.fs_desc = "VCore",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x17,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT_NONE
},
{
.fs_desc = "Vsb",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x18,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
{
.fs_desc = "Vsbint",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x19,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
{
.fs_desc = "Vbat",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x1a,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
/* Temperature */
{
.fs_desc = "Temp1",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x01,
.fs_reg = 0x1b,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
{
.fs_desc = "Temp2",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x02,
.fs_reg = 0x1c,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
{
.fs_desc = "Temp3",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x04,
.fs_reg = 0x1d,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
/* Fans */
{
.fs_desc = "Fan1",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0x20,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{
.fs_desc = "Fan2",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0x22,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{
.fs_desc = "Fan3",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0x24,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{ .fs_desc = NULL }
};
/* Sensors available in F71862/F71882/F71883 */
static struct finsio_sensor f71883_sensors[] = {
/* Voltage */
{
.fs_desc = "+3.3V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x20,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(100, 100)
},
{
.fs_desc = "Vcore",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x21,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT_NONE
},
{
.fs_desc = "VIN2",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x22,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(100, 100)
},
{
.fs_desc = "VIN3",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x23,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(47, 100)
},
{
.fs_desc = "VIN4",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x24,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
{
.fs_desc = "VIN5",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x25,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 20)
},
{
.fs_desc = "VIN6",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x26,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(100, 100)
},
{
.fs_desc = "VSB +3.3V",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x27,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
{
.fs_desc = "VBAT",
.fs_type = ENVSYS_SVOLTS_DC,
.fs_aux = 0,
.fs_reg = 0x28,
.fs_refresh = finsio_refresh_volt,
.fs_rfact = FRFACT(200, 47)
},
/* Temperature */
{
.fs_desc = "Temp1",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x1,
.fs_reg = 0x72,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
{
.fs_desc = "Temp2",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x2,
.fs_reg = 0x74,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
{
.fs_desc = "Temp3",
.fs_type = ENVSYS_STEMP,
.fs_aux = 0x4,
.fs_reg = 0x76,
.fs_refresh = finsio_refresh_temp,
.fs_rfact = 0
},
/* Fan */
{
.fs_desc = "Fan1",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0xa0,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{
.fs_desc = "Fan2",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0xb0,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{
.fs_desc = "Fan3",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0xc0,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{
.fs_desc = "Fan4",
.fs_type = ENVSYS_SFANRPM,
.fs_aux = 0,
.fs_reg = 0xd0,
.fs_refresh = finsio_refresh_fanrpm,
.fs_rfact = 0
},
{ .fs_desc = NULL }
};
static int
finsio_isa_match(device_t parent, cfdata_t match, void *aux)
{
struct isa_attach_args *ia = aux;
bus_space_handle_t ioh;
uint16_t val;
/* Must supply an address */
if (ia->ia_nio < 1)
return 0;
if (ISA_DIRECT_CONFIG(ia))
return 0;
if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
return 0;
if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, 2, 0, &ioh))
return 0;
finsio_enter(ia->ia_iot, ioh);
/* Find out Manufacturer ID */
val = finsio_readreg(ia->ia_iot, ioh, FINSIO_MANUF) << 8;
val |= finsio_readreg(ia->ia_iot, ioh, FINSIO_MANUF + 1);
finsio_exit(ia->ia_iot, ioh);
bus_space_unmap(ia->ia_iot, ioh, 2);
if (val != FINTEK_ID)
return 0;
ia->ia_nio = 1;
ia->ia_io[0].ir_size = 2;
ia->ia_niomem = 0;
ia->ia_nirq = 0;
ia->ia_ndrq = 0;
return 1;
}
static void
finsio_isa_attach(device_t parent, device_t self, void *aux)
{
struct finsio_softc *sc = device_private(self);
struct isa_attach_args *ia = aux;
bus_space_handle_t ioh;
uint16_t hwmon_baddr, chipid, cr;
int i, rv = 0;
aprint_naive("\n");
sc->sc_iot = ia->ia_iot;
/* Map Super I/O configuration space */
if (bus_space_map(sc->sc_iot, ia->ia_io[0].ir_addr, 2, 0, &ioh)) {
aprint_error(": can't map configuration I/O space\n");
return;
}
finsio_enter(sc->sc_iot, ioh);
/* Get the Chip ID */
chipid = finsio_readreg(sc->sc_iot, ioh, FINSIO_CHIP) << 8;
chipid |= finsio_readreg(sc->sc_iot, ioh, FINSIO_CHIP + 1);
/*
* Select the Hardware Monitor LDN to find out the I/O
* address space.
*/
finsio_writereg(sc->sc_iot, ioh, FINSIO_FUNC_SEL, FINSIO_FUNC_HWMON);
hwmon_baddr = finsio_readreg(sc->sc_iot, ioh, FINSIO_SENSADDR) << 8;
hwmon_baddr |= finsio_readreg(sc->sc_iot, ioh, FINSIO_SENSADDR + 1);
finsio_exit(sc->sc_iot, ioh);
bus_space_unmap(sc->sc_iot, ioh, 2);
/*
* The address decoder ignores the bottom 3 bits, so do we.
*/
hwmon_baddr &= ~FINSIO_DECODE_MASK;
switch (chipid) {
case FINSIO_IDF71805:
sc->sc_finsio_sensors = f71805_sensors;
aprint_normal(": Fintek F71805 Super I/O\n");
break;
case FINSIO_IDF71806:
sc->sc_finsio_sensors = f71805_sensors;
aprint_normal(": Fintek F71806/F71872 Super I/O\n");
break;
case FINSIO_IDF71862:
sc->sc_finsio_sensors = f71883_sensors;
aprint_normal(": Fintek F71862 Super I/O\n");
break;
case FINSIO_IDF71883:
sc->sc_finsio_sensors = f71883_sensors;
aprint_normal(": Fintek F71882/F71883 Super I/O\n");
break;
case FINSIO_IDF8000:
sc->sc_finsio_sensors = f71883_sensors;
aprint_normal(": ASUS F8000 Super I/O\n");
break;
default:
/*
* Unknown Chip ID, assume the same register layout
* than F71805 for now.
*/
sc->sc_finsio_sensors = f71805_sensors;
aprint_normal(": Fintek Super I/O (unknown chip ID %x)\n",
chipid);
break;
}
/* Map Hardware Monitor I/O space */
if (bus_space_map(sc->sc_iot, hwmon_baddr, FINSIO_DECODE_SIZE,
0, &sc->sc_ioh)) {
aprint_error(": can't map hwmon I/O space\n");
return;
}
/*
* Enable Hardware monitoring for fan/temperature and
* voltage sensors.
*/
cr = finsio_readreg(sc->sc_iot, sc->sc_ioh, FINSIO_HWMON_CONF);
finsio_writereg(sc->sc_iot, sc->sc_ioh, FINSIO_HWMON_CONF, cr | 0x3);
/* Find out the temperature mode */
sc->sc_tempsel = finsio_readreg(sc->sc_iot, sc->sc_ioh, FINSIO_TMODE);
/*
* Initialize and attach sensors with sysmon_envsys(9).
*/
sc->sc_sme = sysmon_envsys_create();
for (i = 0; sc->sc_finsio_sensors[i].fs_desc; i++) {
sc->sc_sensor[i].state = ENVSYS_SINVALID;
sc->sc_sensor[i].units = sc->sc_finsio_sensors[i].fs_type;
if (sc->sc_sensor[i].units == ENVSYS_SVOLTS_DC)
sc->sc_sensor[i].flags = ENVSYS_FCHANGERFACT;
strlcpy(sc->sc_sensor[i].desc, sc->sc_finsio_sensors[i].fs_desc,
sizeof(sc->sc_sensor[i].desc));
if (sysmon_envsys_sensor_attach(sc->sc_sme,
&sc->sc_sensor[i]))
goto fail;
}
sc->sc_sme->sme_name = device_xname(self);
sc->sc_sme->sme_cookie = sc;
sc->sc_sme->sme_refresh = finsio_refresh;
if ((rv = sysmon_envsys_register(sc->sc_sme))) {
aprint_error(": unable to register with sysmon (%d)\n", rv);
goto fail;
}
aprint_normal_dev(self,
"Hardware Monitor registers at 0x%x\n", hwmon_baddr);
return;
fail:
sysmon_envsys_destroy(sc->sc_sme);
sc->sc_sme = NULL;
bus_space_unmap(sc->sc_iot, sc->sc_ioh, FINSIO_DECODE_SIZE);
}
static int
finsio_isa_detach(device_t self, int flags)
{
struct finsio_softc *sc = device_private(self);
if (sc->sc_sme != NULL)
sysmon_envsys_unregister(sc->sc_sme);
bus_space_unmap(sc->sc_iot, sc->sc_ioh, FINSIO_DECODE_SIZE);
return 0;
}
/* Enter Super I/O configuration mode */
static void
finsio_enter(bus_space_tag_t iot, bus_space_handle_t ioh)
{
bus_space_write_1(iot, ioh, FINSIO_ADDR, FINSIO_UNLOCK);
bus_space_write_1(iot, ioh, FINSIO_ADDR, FINSIO_UNLOCK);
}
/* Exit Super I/O configuration mode */
static void
finsio_exit(bus_space_tag_t iot, bus_space_handle_t ioh)
{
bus_space_write_1(iot, ioh, FINSIO_ADDR, FINSIO_LOCK);
}
static uint8_t
finsio_readreg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg)
{
bus_space_write_1(iot, ioh, FINSIO_ADDR, reg);
return bus_space_read_1(iot, ioh, FINSIO_DATA);
}
static void
finsio_writereg(bus_space_tag_t iot, bus_space_handle_t ioh, int reg, int val)
{
bus_space_write_1(iot, ioh, FINSIO_ADDR, reg);
bus_space_write_1(iot, ioh, FINSIO_DATA, val);
}
static void
finsio_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
{
struct finsio_softc *sc = sme->sme_cookie;
int i = edata->sensor;
sc->sc_finsio_sensors[i].fs_refresh(sc, edata);
}
static void
finsio_refresh_volt(struct finsio_softc *sc, envsys_data_t *edata)
{
struct finsio_sensor *fs = &sc->sc_finsio_sensors[edata->sensor];
int data;
data = finsio_readreg(sc->sc_iot, sc->sc_ioh, fs->fs_reg);
DPRINTF(("%s: data 0x%x\n", __func__, data));
if (data == 0xff || data == 0)
edata->state = ENVSYS_SINVALID;
else {
edata->state = ENVSYS_SVALID;
if (edata->rfact)
edata->value_cur = data * edata->rfact;
else
edata->value_cur = data * fs->fs_rfact;
}
}
/* The BIOS seems to add a fudge factor to the CPU temp of +5C */
static void
finsio_refresh_temp(struct finsio_softc *sc, envsys_data_t *edata)
{
struct finsio_sensor *fs = &sc->sc_finsio_sensors[edata->sensor];
u_int data;
u_int llmax;
/*
* The data sheet says that the range of the temperature
* sensor is between 0 and 127 or 140 degrees C depending on
* what kind of sensor is used.
* A disconnected sensor seems to read over 110 or so.
*/
data = finsio_readreg(sc->sc_iot, sc->sc_ioh, fs->fs_reg) & 0xFF;
DPRINTF(("%s: data 0x%x\n", __func__, data));
llmax = (sc->sc_tempsel & fs->fs_aux) ? 111 : 128;
if (data == 0 || data >= llmax) /* disconnected? */
edata->state = ENVSYS_SINVALID;
else {
edata->state = ENVSYS_SVALID;
edata->value_cur = data * 1000000 + 273150000;
}
}
/* fan speed appears to be a 12-bit number */
static void
finsio_refresh_fanrpm(struct finsio_softc *sc, envsys_data_t *edata)
{
struct finsio_sensor *fs = &sc->sc_finsio_sensors[edata->sensor];
int data;
data = finsio_readreg(sc->sc_iot, sc->sc_ioh, fs->fs_reg) << 8;
data |= finsio_readreg(sc->sc_iot, sc->sc_ioh, fs->fs_reg + 1);
DPRINTF(("%s: data 0x%x\n", __func__, data));
if (data >= 0xfff)
edata->state = ENVSYS_SINVALID;
else {
edata->value_cur = 1500000 / data;
edata->state = ENVSYS_SVALID;
}
}
MODULE(MODULE_CLASS_DRIVER, finsio, "sysmon_envsys");
#ifdef _MODULE
#include "ioconf.c"
#endif
static int
finsio_modcmd(modcmd_t cmd, void *opaque)
{
int error = 0;
switch (cmd) {
case MODULE_CMD_INIT:
#ifdef _MODULE
error = config_init_component(cfdriver_ioconf_finsio,
cfattach_ioconf_finsio, cfdata_ioconf_finsio);
#endif
return error;
case MODULE_CMD_FINI:
#ifdef _MODULE
error = config_fini_component(cfdriver_ioconf_finsio,
cfattach_ioconf_finsio, cfdata_ioconf_finsio);
#endif
return error;
default:
return ENOTTY;
}
}
