/* $NetBSD: ugreg.h,v 1.2 2024/09/07 06:17:37 andvar Exp $ */
/*
* Copyright (c) 2007 Mihai Chelaru <
[email protected]>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _UGREG_H_
#define _UGREG_H_
#define UG_DRV_VERSION 1000
/*
* Abit uGuru (first version)
*/
#define UG_DELAY_CYCLES 5000
#define UG_NUM_SENSORS 19
#define UG_MAX_SENSORS 32
/* Data and Cmd offsets - Base is usually 0xE0 */
#define UG_CMD 0
#define UG_DATA 4
/* Temp and Voltage Sensors */
#define UG_CPUTEMP 0x2100
#define UG_SYSTEMP 0x2101
#define UG_HTV 0x2102
#define UG_VCORE 0x2103
#define UG_DDRVDD 0x2104
#define UG_3V3 0x2105
#define UG_5V 0x2106
#define UG_NBVDD 0x2108
#define UG_AGP 0x2109
#define UG_DDRVTT 0x210A
#define UG_5VSB 0x210B
#define UG_3VDUAL 0x210D
#define UG_SBVDD 0x210E
#define UG_PWMTEMP 0x210F
/* Fans */
#define UG_CPUFAN 0x2600
#define UG_NBFAN 0x2601
#define UG_SYSFAN 0x2602
#define UG_AUXFAN1 0x2603
#define UG_AUXFAN2 0x2604
/* RFacts */
#define UG_RFACT 1000
#define UG_RFACT3 3490 * UG_RFACT / 255
#define UG_RFACT4 4360 * UG_RFACT / 255
#define UG_RFACT6 6250 * UG_RFACT / 255
#define UG_RFACT_FAN 15300/255
/* Voltage and Fan sensors offsets */
#define UG_VOLT_MIN 3
#define UG_FAN_MIN 14
/*
* Abit uGuru2 or uGuru 2005 settings
*/
/* Sensor banks */
#define UG2_SETTINGS_BANK 0x01
#define UG2_SENSORS_BANK 0x08
#define UG2_MISC_BANK 0x09
/* Sensor offsets */
#define UG2_ALARMS_OFFSET 0x1E
#define UG2_SETTINGS_OFFSET 0x24
#define UG2_VALUES_OFFSET 0x80
/* Misc Sensor */
#define UG2_BOARD_ID 0x0A
/* sensor types */
#define UG2_VOLTAGE_SENSOR 0
#define UG2_TEMP_SENSOR 1
#define UG2_FAN_SENSOR 2
/* uGuru status flags */
#define UG2_STATUS_READY_FOR_READ 0x01
#define UG2_STATUS_BUSY 0x02
/* No more than 32 sensors */
#define UG2_MAX_NO_SENSORS 32
/* Unknown board should be the last. Now is 0x0016 */
#define UG_MAX_MSB_BOARD 0x00
#define UG_MAX_LSB_BOARD 0x16
#define UG_MIN_LSB_BOARD 0x0c
#endif /* _UGREG_H_ */
