/*      $NetBSD: osiop.c,v 1.43 2021/08/07 16:19:12 thorpej Exp $       */

/*-
* Copyright (c) 2001 Izumi Tsutsui.  All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
*    may be used to endorse or promote products derived from this software
*    without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*      @(#)siop.c      7.5 (Berkeley) 5/4/91
*/

/*
* Copyright (c) 1994 Michael L. Hitch
*
* This code is derived from software contributed to Berkeley by
* Van Jacobson of Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*      @(#)siop.c      7.5 (Berkeley) 5/4/91
*/

/*
* MI NCR53C710 scsi adaptor driver; based on arch/amiga/dev/siop.c:
*      NetBSD: siop.c,v 1.43 1999/09/30 22:59:53 thorpej Exp
*
* bus_space/bus_dma'fied by Izumi Tsutsui <[email protected]>
*/

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: osiop.c,v 1.43 2021/08/07 16:19:12 thorpej Exp $");

/* #define OSIOP_DEBUG */

#include "opt_ddb.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/kernel.h>

#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
#include <dev/scsipi/scsi_message.h>

#include <sys/cpu.h>
#include <sys/bus.h>

#include <dev/ic/osiopreg.h>
#include <dev/ic/osiopvar.h>

/* 53C710 script */
#include <dev/microcode/siop/osiop.out>

static void osiop_minphys(struct buf *);
static void osiop_scsipi_request(struct scsipi_channel *, scsipi_adapter_req_t,
   void *);
static void osiop_poll(struct osiop_softc *, struct osiop_acb *);
static void osiop_sched(struct osiop_softc *);
static void osiop_scsidone(struct osiop_acb *, int);
static void osiop_abort(struct osiop_softc *, const char *);
static void osiop_init(struct osiop_softc *);
static void osiop_reset(struct osiop_softc *);
static void osiop_resetbus(struct osiop_softc *);
static void osiop_start(struct osiop_softc *);
static int osiop_checkintr(struct osiop_softc *, uint8_t, uint8_t, uint8_t,
   int *);
static void osiop_select(struct osiop_softc *);
static void osiop_update_xfer_mode(struct osiop_softc *, int);
static void scsi_period_to_osiop(struct osiop_softc *, int);
static void osiop_timeout(void *);

int osiop_reset_delay = 250;    /* delay after reset, in milliseconds */

#ifdef OSIOP_DEBUG
#define DEBUG_DMA       0x01
#define DEBUG_INT       0x02
#define DEBUG_PHASE     0x04
#define DEBUG_UNEXCEPT  0x08
#define DEBUG_DISC      0x10
#define DEBUG_CMD       0x20
#define DEBUG_ALL       0xff
int osiop_debug = 0; /*DEBUG_ALL;*/

int osiopsync_debug = 0;
int osiopdma_hits = 1;
int osiopstarts = 0;
int osiopints = 0;
int osiopphmm = 0;
int osiop_trix = 0;
#define OSIOP_TRACE_SIZE        128
#define OSIOP_TRACE(a,b,c,d)    do {                            \
       osiop_trbuf[osiop_trix + 0] = (a);                      \
       osiop_trbuf[osiop_trix + 1] = (b);                      \
       osiop_trbuf[osiop_trix + 2] = (c);                      \
       osiop_trbuf[osiop_trix + 3] = (d);                      \
       osiop_trix = (osiop_trix + 4) & (OSIOP_TRACE_SIZE - 1); \
} while (0)
uint8_t osiop_trbuf[OSIOP_TRACE_SIZE];
void osiop_dump_trace(void);
void osiop_dump_acb(struct osiop_acb *);
void osiop_dump(struct osiop_softc *);
#else
#define OSIOP_TRACE(a,b,c,d)
#endif

void
osiop_attach(struct osiop_softc *sc)
{
       struct osiop_acb *acb;
       bus_dma_segment_t seg;
       int nseg;
       int i, err;

       /*
        * Allocate and map DMA-safe memory for the script.
        */
       err = bus_dmamem_alloc(sc->sc_dmat, PAGE_SIZE, PAGE_SIZE, 0,
           &seg, 1, &nseg, BUS_DMA_NOWAIT);
       if (err) {
               aprint_error(": failed to allocate script memory, err=%d\n",
                   err);
               return;
       }
       err = bus_dmamem_map(sc->sc_dmat, &seg, nseg, PAGE_SIZE,
           (void **)&sc->sc_script, BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
       if (err) {
               aprint_error(": failed to map script memory, err=%d\n", err);
               return;
       }
       err = bus_dmamap_create(sc->sc_dmat, PAGE_SIZE, 1, PAGE_SIZE, 0,
           BUS_DMA_NOWAIT, &sc->sc_scrdma);
       if (err) {
               aprint_error(": failed to create script map, err=%d\n", err);
               return;
       }
       err = bus_dmamap_load(sc->sc_dmat, sc->sc_scrdma,
           sc->sc_script, PAGE_SIZE, NULL, BUS_DMA_NOWAIT);
       if (err) {
               aprint_error(": failed to load script map, err=%d\n", err);
               return;
       }

       /*
        * Copy and sync script
        */
       memcpy(sc->sc_script, osiop_script, sizeof(osiop_script));
       bus_dmamap_sync(sc->sc_dmat, sc->sc_scrdma, 0, sizeof(osiop_script),
           BUS_DMASYNC_PREWRITE);

       /*
        * Allocate and map DMA-safe memory for the script data structure.
        */
       err = bus_dmamem_alloc(sc->sc_dmat,
           sizeof(struct osiop_ds) * OSIOP_NACB, PAGE_SIZE, 0,
           &seg, 1, &nseg, BUS_DMA_NOWAIT);
       if (err) {
               aprint_error(": failed to allocate ds memory, err=%d\n", err);
               return;
       }
       err = bus_dmamem_map(sc->sc_dmat, &seg, nseg,
           sizeof(struct osiop_ds) * OSIOP_NACB, (void **)&sc->sc_ds,
           BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
       if (err) {
               aprint_error(": failed to map ds memory, err=%d\n", err);
               return;
       }
       err = bus_dmamap_create(sc->sc_dmat,
           sizeof(struct osiop_ds) * OSIOP_NACB, 1,
           sizeof(struct osiop_ds) * OSIOP_NACB, 0,
           BUS_DMA_NOWAIT, &sc->sc_dsdma);
       if (err) {
               aprint_error(": failed to create ds map, err=%d\n", err);
               return;
       }
       err = bus_dmamap_load(sc->sc_dmat, sc->sc_dsdma, sc->sc_ds,
           sizeof(struct osiop_ds) * OSIOP_NACB, NULL, BUS_DMA_NOWAIT);
       if (err) {
               aprint_error(": failed to load ds map, err=%d\n", err);
               return;
       }

       acb = malloc(sizeof(struct osiop_acb) * OSIOP_NACB,
           M_DEVBUF, M_WAITOK|M_ZERO);
       sc->sc_acb = acb;
       sc->sc_cfflags = device_cfdata(sc->sc_dev)->cf_flags;
       sc->sc_nexus = NULL;
       sc->sc_active = 0;
       memset(sc->sc_tinfo, 0, sizeof(sc->sc_tinfo));

       /* Initialize command block queue */
       TAILQ_INIT(&sc->ready_list);
       TAILQ_INIT(&sc->nexus_list);
       TAILQ_INIT(&sc->free_list);

       /* Initialize each command block */
       for (i = 0; i < OSIOP_NACB; i++) {
               bus_addr_t dsa;

               err = bus_dmamap_create(sc->sc_dmat, OSIOP_MAX_XFER, OSIOP_NSG,
                   OSIOP_MAX_XFER, 0, BUS_DMA_NOWAIT, &acb->datadma);
               if (err) {
                       aprint_error(": failed to create datadma map, err=%d\n",
                           err);
                       return;
               }

               acb->sc = sc;
               acb->ds = &sc->sc_ds[i];
               acb->dsoffset = sizeof(struct osiop_ds) * i;

               dsa = sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset;
               acb->ds->id.addr = dsa + OSIOP_DSIDOFF;
               acb->ds->cmd.addr = dsa + OSIOP_DSCMDOFF;
               acb->ds->status.count = 1;
               acb->ds->status.addr = dsa + OSIOP_DSSTATOFF;
               acb->ds->msg.count = 1;
               acb->ds->msg.addr = dsa + OSIOP_DSMSGOFF;
               acb->ds->msgin.count = 1;
               acb->ds->msgin.addr = dsa + OSIOP_DSMSGINOFF;
               acb->ds->extmsg.count = 1;
               acb->ds->extmsg.addr = dsa + OSIOP_DSEXTMSGOFF;
               acb->ds->synmsg.count = 3;
               acb->ds->synmsg.addr = dsa + OSIOP_DSSYNMSGOFF;
               TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);

               acb++;
       }

       aprint_normal(": NCR53C710 rev %d, %dMHz, SCSI ID %d\n",
           osiop_read_1(sc, OSIOP_CTEST8) >> 4, sc->sc_clock_freq, sc->sc_id);

       /*
        * Initialize all
        */
       osiop_init(sc);

       /*
        * Fill in the adapter.
        */
       sc->sc_adapter.adapt_dev = sc->sc_dev;
       sc->sc_adapter.adapt_nchannels = 1;
       sc->sc_adapter.adapt_openings = OSIOP_NACB;
       sc->sc_adapter.adapt_max_periph = 1;
       sc->sc_adapter.adapt_ioctl = NULL;
       sc->sc_adapter.adapt_minphys = osiop_minphys;
       sc->sc_adapter.adapt_request = osiop_scsipi_request;

       /*
        * Fill in the channel.
        */
       sc->sc_channel.chan_adapter = &sc->sc_adapter;
       sc->sc_channel.chan_bustype = &scsi_bustype;
       sc->sc_channel.chan_channel = 0;
       sc->sc_channel.chan_ntargets = OSIOP_NTGT;
       sc->sc_channel.chan_nluns = 8;
       sc->sc_channel.chan_id = sc->sc_id;

       /*
        * Now try to attach all the sub devices.
        */
       config_found(sc->sc_dev, &sc->sc_channel, scsiprint, CFARGS_NONE);
}

/*
* default minphys routine for osiop based controllers
*/
void
osiop_minphys(struct buf *bp)
{

       if (bp->b_bcount > OSIOP_MAX_XFER)
               bp->b_bcount = OSIOP_MAX_XFER;
       minphys(bp);
}

/*
* used by specific osiop controller
*
*/
void
osiop_scsipi_request(struct scsipi_channel *chan, scsipi_adapter_req_t req,
   void *arg)
{
       struct scsipi_xfer *xs;
       struct osiop_acb *acb;
       struct osiop_softc *sc;
       int err, flags, s;

       sc = device_private(chan->chan_adapter->adapt_dev);

       switch (req) {
       case ADAPTER_REQ_RUN_XFER:
               xs = arg;
               flags = xs->xs_control;

               /* XXXX ?? */
               if (flags & XS_CTL_DATA_UIO)
                       panic("osiop: scsi data uio requested");

               /* XXXX ?? */
               if (sc->sc_nexus && flags & XS_CTL_POLL)
#if 0
                       panic("osiop_scsicmd: busy");
#else
                       printf("osiop_scsicmd: busy\n");
#endif

               s = splbio();
               acb = TAILQ_FIRST(&sc->free_list);
               if (acb != NULL) {
                       TAILQ_REMOVE(&sc->free_list, acb, chain);
               }
#ifdef DIAGNOSTIC
               else {
                       scsipi_printaddr(xs->xs_periph);
                       printf("unable to allocate acb\n");
                       panic("osiop_scsipi_request");
               }
#endif

               acb->status = ACB_S_READY;
               acb->xs = xs;

               /* Setup DMA map for data buffer */
               if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
                       err = bus_dmamap_load(sc->sc_dmat, acb->datadma,
                           xs->data, xs->datalen, NULL,
                           BUS_DMA_NOWAIT | BUS_DMA_STREAMING |
                           ((xs->xs_control & XS_CTL_DATA_IN) ?
                            BUS_DMA_READ : BUS_DMA_WRITE));
                       if (err) {
                               printf("%s: unable to load data DMA map: %d\n",
                                   device_xname(sc->sc_dev), err);
                               xs->error = XS_DRIVER_STUFFUP;
                               scsipi_done(xs);
                               TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
                               splx(s);
                               return;
                       }
               }

               acb->cmdlen = xs->cmdlen;
               acb->datalen = xs->datalen;
#ifdef OSIOP_DEBUG
               acb->data = xs->data;
#endif

               TAILQ_INSERT_TAIL(&sc->ready_list, acb, chain);

               if (sc->sc_nexus == NULL)
                       osiop_sched(sc);

               splx(s);

               if (flags & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA)
                       osiop_poll(sc, acb);
               return;

       case ADAPTER_REQ_GROW_RESOURCES:
               return;

       case ADAPTER_REQ_SET_XFER_MODE:
               {
                       struct osiop_tinfo *ti;
                       struct scsipi_xfer_mode *xm = arg;

                       ti = &sc->sc_tinfo[xm->xm_target];

                       if ((xm->xm_mode & PERIPH_CAP_SYNC) != 0 &&
                           (ti->flags & TI_NOSYNC) == 0)
                               ti->state = NEG_INIT;

                       /*
                        * If we're not going to negotiate, send the
                        * notification now, since it won't happen later.
                        */
                       if (ti->state == NEG_DONE)
                               osiop_update_xfer_mode(sc, xm->xm_target);

                       return;
               }
       }
}

void
osiop_poll(struct osiop_softc *sc, struct osiop_acb *acb)
{
       struct scsipi_xfer *xs = acb->xs;
       int status, i, s, to;
       uint8_t istat, dstat, sstat0;

       s = splbio();
       to = xs->timeout / 1000;
       if (!TAILQ_EMPTY(&sc->nexus_list))
               printf("%s: osiop_poll called with disconnected device\n",
                   device_xname(sc->sc_dev));
       for (;;) {
               i = 1000;
               while (((istat = osiop_read_1(sc, OSIOP_ISTAT)) &
                   (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
                       if (i <= 0) {
#ifdef OSIOP_DEBUG
                               printf("waiting: tgt %d cmd %02x sbcl %02x"
                                   " dsp %x (+%lx) dcmd %x"
                                   " ds %p timeout %d\n",
                                   xs->xs_periph->periph_target,
                                   xs->cmd->opcode,
                                   osiop_read_1(sc, OSIOP_SBCL),
                                   osiop_read_4(sc, OSIOP_DSP),
                                   osiop_read_4(sc, OSIOP_DSP) -
                                       sc->sc_scrdma->dm_segs[0].ds_addr,
                                   osiop_read_1(sc, OSIOP_DCMD),
                                   acb->ds, acb->xs->timeout);
#endif
                               i = 1000;
                               to--;
                               if (to <= 0) {
                                       osiop_reset(sc);
                                       splx(s);
                                       return;
                               }
                       }
                       delay(1000);
                       i--;
               }
               sstat0 = osiop_read_1(sc, OSIOP_SSTAT0);
               delay(25);
               dstat = osiop_read_1(sc, OSIOP_DSTAT);
               if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
                       if (acb != sc->sc_nexus)
                               printf("%s: osiop_poll disconnected device"
                                   " completed\n", device_xname(sc->sc_dev));
                       else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
                               sc->sc_flags &= ~OSIOP_INTSOFF;
                               osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
                               osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
                       }
                       osiop_scsidone(sc->sc_nexus, status);
               }

               if (xs->xs_status & XS_STS_DONE)
                       break;
       }

       splx(s);
       return;
}

/*
* start next command that's ready
*/
void
osiop_sched(struct osiop_softc *sc)
{
       struct scsipi_periph *periph;
       struct osiop_acb *acb;
       int i;

#ifdef OSIOP_DEBUG
       if (sc->sc_nexus != NULL) {
               printf("%s: osiop_sched- nexus %p/%d ready %p/%d\n",
                   device_xname(sc->sc_dev), sc->sc_nexus,
                   sc->sc_nexus->xs->xs_periph->periph_target,
                   TAILQ_FIRST(&sc->ready_list),
                   TAILQ_FIRST(&sc->ready_list)->xs->xs_periph->periph_target);
               return;
       }
#endif
       TAILQ_FOREACH(acb, &sc->ready_list, chain) {
               periph = acb->xs->xs_periph;
               i = periph->periph_target;
               if ((sc->sc_tinfo[i].lubusy & (1 << periph->periph_lun)) == 0) {
                       struct osiop_tinfo *ti;

                       TAILQ_REMOVE(&sc->ready_list, acb, chain);
                       sc->sc_nexus = acb;
                       ti = &sc->sc_tinfo[i];
                       ti->lubusy |= (1 << periph->periph_lun);
                       break;
               }
       }

       if (acb == NULL) {
#ifdef OSIOP_DEBUG
               printf("%s: osiop_sched didn't find ready command\n",
                   device_xname(sc->sc_dev));
#endif
               return;
       }

       if (acb->xs->xs_control & XS_CTL_RESET)
               osiop_reset(sc);

       sc->sc_active++;
       osiop_select(sc);
}

void
osiop_scsidone(struct osiop_acb *acb, int status)
{
       struct scsipi_xfer *xs;
       struct scsipi_periph *periph;
       struct osiop_softc *sc;
       int dosched = 0;

#ifdef DIAGNOSTIC
       if (acb == NULL || acb->xs == NULL) {
               printf("osiop_scsidone: NULL acb or scsipi_xfer\n");
#if defined(OSIOP_DEBUG) && defined(DDB)
               Debugger();
#endif
               return;
       }
#endif
       xs = acb->xs;
       sc = acb->sc;
       periph = xs->xs_periph;

#ifdef OSIOP_DEBUG
       if (acb->status != ACB_S_DONE)
               printf("%s: acb not done (status %d)\n",
                   device_xname(sc->sc_dev), acb->status);
#endif

       xs->status = status;

       switch (status) {
       case SCSI_OK:
               xs->error = XS_NOERROR;
               break;
       case SCSI_BUSY:
               xs->error = XS_BUSY;
               break;
       case SCSI_CHECK:
               xs->error = XS_BUSY;
               break;
       case SCSI_OSIOP_NOCHECK:
               /*
                * don't check status, xs->error is already valid
                */
               break;
       case SCSI_OSIOP_NOSTATUS:
               /*
                * the status byte was not updated, cmd was
                * aborted
                */
               xs->error = XS_SELTIMEOUT;
               break;
       default:
#ifdef OSIOP_DEBUG
               printf("%s: osiop_scsidone: unknown status code (0x%02x)\n",
                   device_xname(sc->sc_dev), status);
#endif
               xs->error = XS_DRIVER_STUFFUP;
               break;
       }

       if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
               bus_dmamap_sync(sc->sc_dmat, acb->datadma, 0, acb->datalen,
                   (xs->xs_control & XS_CTL_DATA_IN) ?
                   BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
               bus_dmamap_unload(sc->sc_dmat, acb->datadma);
       }

       /*
        * Remove the ACB from whatever queue it's on.  We have to do a bit of
        * a hack to figure out which queue it's on.  Note that it is *not*
        * necessary to cdr down the ready queue, but we must cdr down the
        * nexus queue and see if it's there, so we can mark the unit as no
        * longer busy.  This code is sickening, but it works.
        */
       if (acb == sc->sc_nexus) {
               sc->sc_nexus = NULL;
               sc->sc_tinfo[periph->periph_target].lubusy &=
                   ~(1 << periph->periph_lun);
               if (!TAILQ_EMPTY(&sc->ready_list))
                       dosched = 1;    /* start next command */
               sc->sc_active--;
               OSIOP_TRACE('d', 'a', status, 0);
       } else if (sc->ready_list.tqh_last == &TAILQ_NEXT(acb, chain)) {
               TAILQ_REMOVE(&sc->ready_list, acb, chain);
               OSIOP_TRACE('d', 'r', status, 0);
       } else {
               struct osiop_acb *acb2;
               TAILQ_FOREACH(acb2, &sc->nexus_list, chain) {
                       if (acb2 == acb) {
                               TAILQ_REMOVE(&sc->nexus_list, acb, chain);
                               sc->sc_tinfo[periph->periph_target].lubusy &=
                                   ~(1 << periph->periph_lun);
                               sc->sc_active--;
                               break;
                       }
               }
               if (acb2 == NULL) {
                       if (TAILQ_NEXT(acb, chain) != NULL) {
                               TAILQ_REMOVE(&sc->ready_list, acb, chain);
                               sc->sc_active--;
                       } else {
                               printf("%s: can't find matching acb\n",
                                   device_xname(sc->sc_dev));
#ifdef DDB
#if 0
                               Debugger();
#endif
#endif
                       }
               }
               OSIOP_TRACE('d', 'n', status, 0);
       }
       /* Put it on the free list. */
       acb->status = ACB_S_FREE;
       TAILQ_INSERT_TAIL(&sc->free_list, acb, chain);
       sc->sc_tinfo[periph->periph_target].cmds++;

       callout_stop(&xs->xs_callout);
       xs->resid = 0;
       scsipi_done(xs);

       if (dosched && sc->sc_nexus == NULL)
               osiop_sched(sc);
}

void
osiop_abort(struct osiop_softc *sc, const char *where)
{

       printf("%s: abort %s: dstat %02x, sstat0 %02x sbcl %02x\n",
           device_xname(sc->sc_dev), where,
           osiop_read_1(sc, OSIOP_DSTAT),
           osiop_read_1(sc, OSIOP_SSTAT0),
           osiop_read_1(sc, OSIOP_SBCL));

       /* XXX XXX XXX */
       if (sc->sc_active > 0) {
               sc->sc_active = 0;
       }
}

void
osiop_init(struct osiop_softc *sc)
{
       int i, inhibit_sync, inhibit_disc;

       sc->sc_tcp[1] = 1000 / sc->sc_clock_freq;
       sc->sc_tcp[2] = 1500 / sc->sc_clock_freq;
       sc->sc_tcp[3] = 2000 / sc->sc_clock_freq;
       sc->sc_minsync = sc->sc_tcp[1];         /* in 4ns units */

       if (sc->sc_minsync < 25)
               sc->sc_minsync = 25;

       if (sc->sc_clock_freq <= 25) {
               sc->sc_dcntl |= OSIOP_DCNTL_CF_1;       /* SCLK/1 */
               sc->sc_tcp[0] = sc->sc_tcp[1];
       } else if (sc->sc_clock_freq <= 37) {
               sc->sc_dcntl |= OSIOP_DCNTL_CF_1_5;     /* SCLK/1.5 */
               sc->sc_tcp[0] = sc->sc_tcp[2];
       } else if (sc->sc_clock_freq <= 50) {
               sc->sc_dcntl |= OSIOP_DCNTL_CF_2;       /* SCLK/2 */
               sc->sc_tcp[0] = sc->sc_tcp[3];
       } else {
               sc->sc_dcntl |= OSIOP_DCNTL_CF_3;       /* SCLK/3 */
               sc->sc_tcp[0] = 3000 / sc->sc_clock_freq;
       }

       if ((sc->sc_cfflags & 0x10000) != 0) {
               sc->sc_flags |= OSIOP_NODMA;
#ifdef OSIOP_DEBUG
               printf("%s: DMA disabled; use polling\n",
                   device_xname(sc->sc_dev));
#endif
       }

       inhibit_sync = (sc->sc_cfflags & 0xff00) >> 8;  /* XXX */
       inhibit_disc =  sc->sc_cfflags & 0x00ff;        /* XXX */
#ifdef OSIOP_DEBUG
       if (inhibit_sync != 0)
               printf("%s: Inhibiting synchronous transfer: 0x%02x\n",
                   device_xname(sc->sc_dev), inhibit_sync);
       if (inhibit_disc != 0)
               printf("%s: Inhibiting disconnect: 0x%02x\n",
                   device_xname(sc->sc_dev), inhibit_disc);
#endif
       for (i = 0; i < OSIOP_NTGT; i++) {
               if (inhibit_sync & (1 << i))
                       sc->sc_tinfo[i].flags |= TI_NOSYNC;
               if (inhibit_disc & (1 << i))
                       sc->sc_tinfo[i].flags |= TI_NODISC;
       }

       osiop_resetbus(sc);
       osiop_reset(sc);
}

void
osiop_reset(struct osiop_softc *sc)
{
       struct osiop_acb *acb;
       int i, s;
       uint8_t stat;

#ifdef OSIOP_DEBUG
       printf("%s: resetting chip\n", device_xname(sc->sc_dev));
#endif
       if (sc->sc_flags & OSIOP_ALIVE)
               osiop_abort(sc, "reset");

       s = splbio();

       /*
        * Reset the chip
        * XXX - is this really needed?
        */

       /* abort current script */
       osiop_write_1(sc, OSIOP_ISTAT,
           osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_ABRT);
       /* reset chip */
       osiop_write_1(sc, OSIOP_ISTAT,
           osiop_read_1(sc, OSIOP_ISTAT) | OSIOP_ISTAT_RST);
       delay(100);
       osiop_write_1(sc, OSIOP_ISTAT,
           osiop_read_1(sc, OSIOP_ISTAT) & ~OSIOP_ISTAT_RST);
       delay(100);

       /*
        * Set up various chip parameters
        */
       osiop_write_1(sc, OSIOP_SCNTL0,
           OSIOP_ARB_FULL | OSIOP_SCNTL0_EPC | OSIOP_SCNTL0_EPG);
       osiop_write_1(sc, OSIOP_SCNTL1, OSIOP_SCNTL1_ESR);
       osiop_write_1(sc, OSIOP_DCNTL, sc->sc_dcntl);
       osiop_write_1(sc, OSIOP_DMODE, OSIOP_DMODE_BL4);
       /* don't enable interrupts yet */
       osiop_write_1(sc, OSIOP_SIEN, 0x00);
       osiop_write_1(sc, OSIOP_DIEN, 0x00);
       osiop_write_1(sc, OSIOP_SCID, OSIOP_SCID_VALUE(sc->sc_id));
       osiop_write_1(sc, OSIOP_DWT, 0x00);
       osiop_write_1(sc, OSIOP_CTEST0, osiop_read_1(sc, OSIOP_CTEST0)
           | OSIOP_CTEST0_BTD | OSIOP_CTEST0_EAN);
       osiop_write_1(sc, OSIOP_CTEST7,
           osiop_read_1(sc, OSIOP_CTEST7) | sc->sc_ctest7);
       osiop_write_1(sc, OSIOP_CTEST4,
           osiop_read_1(sc, OSIOP_CTEST4) | sc->sc_ctest4);

       /* will need to re-negotiate sync xfers */
       for (i = 0; i < OSIOP_NTGT; i++) {
               sc->sc_tinfo[i].state = NEG_INIT;
               sc->sc_tinfo[i].period = 0;
               sc->sc_tinfo[i].offset = 0;
       }

       stat = osiop_read_1(sc, OSIOP_ISTAT);
       if (stat & OSIOP_ISTAT_SIP)
               osiop_read_1(sc, OSIOP_SSTAT0);
       delay(25);
       if (stat & OSIOP_ISTAT_DIP)
               osiop_read_1(sc, OSIOP_DSTAT);

       splx(s);

       delay(osiop_reset_delay * 1000);

       if (sc->sc_nexus != NULL) {
               sc->sc_nexus->xs->error =
                   (sc->sc_nexus->flags & ACB_F_TIMEOUT) ?
                   XS_TIMEOUT : XS_RESET;
               sc->sc_nexus->status = ACB_S_DONE;
               sc->sc_nexus->flags = 0;
               osiop_scsidone(sc->sc_nexus, SCSI_OSIOP_NOCHECK);
       }
       while ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
               acb->xs->error = (acb->flags & ACB_F_TIMEOUT) ?
                   XS_TIMEOUT : XS_RESET;
               acb->status = ACB_S_DONE;
               acb->flags = 0;
               osiop_scsidone(acb, SCSI_OSIOP_NOCHECK);
       }

       sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
       /* enable SCSI and DMA interrupts */
       sc->sc_sien = OSIOP_SIEN_M_A | OSIOP_SIEN_STO | /*OSIOP_SIEN_SEL |*/
           OSIOP_SIEN_SGE | OSIOP_SIEN_UDC | OSIOP_SIEN_RST | OSIOP_SIEN_PAR;
       sc->sc_dien = OSIOP_DIEN_BF | OSIOP_DIEN_ABRT | OSIOP_DIEN_SIR |
           /*OSIOP_DIEN_WTD |*/ OSIOP_DIEN_IID;
       osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
       osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
}

void
osiop_resetbus(struct osiop_softc *sc)
{

       osiop_write_1(sc, OSIOP_SIEN, 0);
       osiop_write_1(sc, OSIOP_SCNTL1,
           osiop_read_1(sc, OSIOP_SCNTL1) | OSIOP_SCNTL1_RST);
       delay(25);
       osiop_write_1(sc, OSIOP_SCNTL1,
           osiop_read_1(sc, OSIOP_SCNTL1) & ~OSIOP_SCNTL1_RST);
}

/*
* Setup Data Storage for 53C710 and start SCRIPTS processing
*/

void
osiop_start(struct osiop_softc *sc)
{
       struct osiop_acb *acb = sc->sc_nexus;
       struct osiop_ds *ds = acb->ds;
       struct scsipi_xfer *xs = acb->xs;
       bus_dmamap_t dsdma = sc->sc_dsdma, datadma = acb->datadma;
       struct osiop_tinfo *ti;
       int target = xs->xs_periph->periph_target;
       int lun = xs->xs_periph->periph_lun;
       int disconnect, i;

#ifdef OSIOP_DEBUG
       if (osiop_debug & DEBUG_DISC &&
           osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
               printf("ACK! osiop was busy: script %p dsa %p active %d\n",
                   sc->sc_script, acb->ds, sc->sc_active);
               printf("istat %02x sfbr %02x lcrc %02x sien %02x dien %02x\n",
                   osiop_read_1(sc, OSIOP_ISTAT),
                   osiop_read_1(sc, OSIOP_SFBR),
                   osiop_read_1(sc, OSIOP_LCRC),
                   osiop_read_1(sc, OSIOP_SIEN),
                   osiop_read_1(sc, OSIOP_DIEN));
#ifdef DDB
#if 0
               Debugger();
#endif
#endif
       }
#endif

#ifdef OSIOP_DEBUG
       if (acb->status != ACB_S_READY)
               panic("osiop_start: non-ready cmd in acb");
#endif

       acb->intstat = 0;

       /* Copy SCSI command to DMA buffer */
       memcpy(ds->scsipi_cmd, xs->cmd, acb->cmdlen);
       ds->cmd.count = acb->cmdlen;

       ti = &sc->sc_tinfo[target];
       ds->scsi_addr = ((1 << 16) << target) | (ti->sxfer << 8);

       disconnect = (xs->xs_control & XS_CTL_REQSENSE) == 0 &&
           (ti->flags & TI_NODISC) == 0;

       ds->msgout[0] = MSG_IDENTIFY(lun, disconnect);
       ds->id.count = 1;
       ds->stat[0] = SCSI_OSIOP_NOSTATUS;      /* set invalid status */
       ds->msgbuf[0] = ds->msgbuf[1] = MSG_INVALID;
       memset(&ds->data, 0, sizeof(ds->data));

       /*
        * Negotiate wide is the initial negotiation state;  since the 53c710
        * doesn't do wide transfers, just begin the synchronous transfer
        * negotiation here.
        */
       if (ti->state == NEG_INIT) {
               if ((ti->flags & TI_NOSYNC) != 0) {
                       ti->state = NEG_DONE;
                       ti->sbcl = 0;
                       ti->sxfer = 0;
                       ti->period = 0;
                       ti->offset = 0;
                       osiop_update_xfer_mode(sc, target);
#ifdef OSIOP_DEBUG
                       if (osiopsync_debug)
                               printf("Forcing target %d asynchronous\n",
                                   target);
#endif
               } else {
                       ds->msgbuf[2] = MSG_INVALID;
                       ds->msgout[1] = MSG_EXTENDED;
                       ds->msgout[2] = MSG_EXT_SDTR_LEN;
                       ds->msgout[3] = MSG_EXT_SDTR;
                       ds->msgout[4] = sc->sc_minsync;
                       ds->msgout[5] = OSIOP_MAX_OFFSET;
                       ds->id.count = MSG_EXT_SDTR_LEN + 3;
                       ti->state = NEG_WAITS;
#ifdef OSIOP_DEBUG
                       if (osiopsync_debug)
                               printf("Sending sync request to target %d\n",
                                   target);
#endif
               }
       }

       acb->curaddr = 0;
       acb->curlen = 0;

       /*
        * Build physical DMA addresses for scatter/gather I/O
        */
       if (xs->xs_control & (XS_CTL_DATA_IN | XS_CTL_DATA_OUT)) {
               for (i = 0; i < datadma->dm_nsegs; i++) {
                       ds->data[i].count = datadma->dm_segs[i].ds_len;
                       ds->data[i].addr  = datadma->dm_segs[i].ds_addr;
               }
               /* sync xfer data buffer */
               bus_dmamap_sync(sc->sc_dmat, acb->datadma,
                   0, acb->datalen, (xs->xs_control & XS_CTL_DATA_IN) ?
                   BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE);
       }

       /* sync script data structure */
       bus_dmamap_sync(sc->sc_dmat, dsdma,
           acb->dsoffset, sizeof(struct osiop_ds),
           BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);

       acb->status = ACB_S_ACTIVE;

       /* handle timeout */
       if ((xs->xs_control & XS_CTL_POLL) == 0) {
               int timeout = mstohz(acb->xs->timeout);
               /* start expire timer */
               if (timeout == 0)
                       timeout = 1;
               callout_reset(&xs->xs_callout, timeout,
                   osiop_timeout, acb);
       }
#ifdef OSIOP_DEBUG
       if (osiop_debug & DEBUG_DISC &&
           osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
               printf("ACK! osiop was busy at start: "
                   "script %p dsa %p active %d\n",
                   sc->sc_script, acb->ds, sc->sc_active);
#ifdef DDB
#if 0
               Debugger();
#endif
#endif
       }
#endif
       if (TAILQ_EMPTY(&sc->nexus_list)) {
               if (osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON)
                       printf("%s: osiop_select while connected?\n",
                           device_xname(sc->sc_dev));
               osiop_write_4(sc, OSIOP_TEMP, 0);
               osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
               osiop_write_4(sc, OSIOP_DSA,
                   dsdma->dm_segs[0].ds_addr + acb->dsoffset);
               osiop_write_4(sc, OSIOP_DSP,
                   sc->sc_scrdma->dm_segs[0].ds_addr + Ent_scripts);
               OSIOP_TRACE('s', 1, 0, 0);
       } else {
               if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
                       osiop_write_1(sc, OSIOP_ISTAT, OSIOP_ISTAT_SIGP);
                       OSIOP_TRACE('s', 2, 0, 0);
               } else {
                       OSIOP_TRACE('s', 3,
                           osiop_read_1(sc, OSIOP_ISTAT), 0);
               }
       }
#ifdef OSIOP_DEBUG
       osiopstarts++;
#endif
}

/*
* Process a DMA or SCSI interrupt from the 53C710 SIOP
*/

int
osiop_checkintr(struct osiop_softc *sc, uint8_t istat, uint8_t dstat,
   uint8_t sstat0, int *status)
{
       struct osiop_acb *acb = sc->sc_nexus;
       struct osiop_ds *ds = NULL;     /* XXX */
       bus_dmamap_t dsdma = sc->sc_dsdma;
       bus_addr_t scraddr = sc->sc_scrdma->dm_segs[0].ds_addr;
       int target = 0;
       int dfifo, dbc, intcode, sstat1;

       dfifo = osiop_read_1(sc, OSIOP_DFIFO);
       dbc = osiop_read_4(sc, OSIOP_DBC) & 0x00ffffff;
       sstat1 = osiop_read_1(sc, OSIOP_SSTAT1);
       osiop_write_1(sc, OSIOP_CTEST8,
           osiop_read_1(sc, OSIOP_CTEST8) | OSIOP_CTEST8_CLF);
       while ((osiop_read_1(sc, OSIOP_CTEST1) & OSIOP_CTEST1_FMT) !=
           OSIOP_CTEST1_FMT)
               ;
       osiop_write_1(sc, OSIOP_CTEST8,
           osiop_read_1(sc, OSIOP_CTEST8) & ~OSIOP_CTEST8_CLF);
       intcode = osiop_read_4(sc, OSIOP_DSPS);
#ifdef OSIOP_DEBUG
       osiopints++;
       if (osiop_read_4(sc, OSIOP_DSP) != 0 &&
           (osiop_read_4(sc, OSIOP_DSP) < scraddr ||
           osiop_read_4(sc, OSIOP_DSP) >= scraddr + sizeof(osiop_script))) {
               printf("%s: dsp not within script dsp %x scripts %lx:%lx",
                   device_xname(sc->sc_dev),
                   osiop_read_4(sc, OSIOP_DSP),
                   scraddr, scraddr + sizeof(osiop_script));
               printf(" istat %x dstat %x sstat0 %x\n", istat, dstat, sstat0);
#ifdef DDB
               Debugger();
#endif
       }
#endif
       OSIOP_TRACE('i', dstat, istat, (istat & OSIOP_ISTAT_DIP) ?
           intcode & 0xff : sstat0);

       if (acb != NULL) { /* XXX */
               ds = acb->ds;
               bus_dmamap_sync(sc->sc_dmat, dsdma,
                   acb->dsoffset, sizeof(struct osiop_ds),
                   BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
#ifdef OSIOP_DEBUG
               if (acb->status != ACB_S_ACTIVE)
                       printf("osiop_checkintr: acb not active (status %d)\n",
                           acb->status);
#endif
       }


       if (dstat & OSIOP_DSTAT_SIR && intcode == A_ok) {
               /* Normal completion status, or check condition */
               struct osiop_tinfo *ti;

               if (acb == NULL) {
                       printf("%s: COMPLETE with no active command?\n",
                           device_xname(sc->sc_dev));
                       goto bad_phase;
               }
#ifdef OSIOP_DEBUG
               if (osiop_read_4(sc, OSIOP_DSA) !=
                   dsdma->dm_segs[0].ds_addr + acb->dsoffset) {
                       printf("osiop: invalid dsa: %x %lx\n",
                           osiop_read_4(sc, OSIOP_DSA),
                           dsdma->dm_segs[0].ds_addr + acb->dsoffset);
                       panic("*** osiop DSA invalid ***");
               }
#endif
               target = acb->xs->xs_periph->periph_target;
               ti = &sc->sc_tinfo[target];
               if (ti->state == NEG_WAITS) {
                       if (ds->msgbuf[1] == MSG_INVALID)
                               printf("%s: target %d ignored sync request\n",
                                   device_xname(sc->sc_dev), target);
                       else if (ds->msgbuf[1] == MSG_MESSAGE_REJECT)
                               printf("%s: target %d rejected sync request\n",
                                   device_xname(sc->sc_dev), target);
                       ti->period = 0;
                       ti->offset = 0;
                       osiop_update_xfer_mode(sc, target);
                       ti->state = NEG_DONE;
               }
#ifdef OSIOP_DEBUG
               if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
#if 0
                       printf("ACK! osiop was busy at end: "
                           "script %p dsa %p\n", &osiop_script, ds);
#ifdef DDB
                       Debugger();
#endif
#endif
               }
               if (ds->msgbuf[0] != MSG_CMDCOMPLETE)
                       printf("%s: message was not COMMAND COMPLETE: %02x\n",
                           device_xname(sc->sc_dev), ds->msgbuf[0]);
#endif
               if (!TAILQ_EMPTY(&sc->nexus_list))
                       osiop_write_1(sc, OSIOP_DCNTL,
                           osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
               *status = ds->stat[0];
               acb->status = ACB_S_DONE;
               return (1);
       }
       if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_syncmsg) {
               if (acb == NULL) {
                       printf("%s: sync message with no active command?\n",
                           device_xname(sc->sc_dev));
                       goto bad_phase;
               }
               target = acb->xs->xs_periph->periph_target;
               if (ds->msgbuf[1] == MSG_EXTENDED &&
                   ds->msgbuf[2] == MSG_EXT_SDTR_LEN &&
                   ds->msgbuf[3] == MSG_EXT_SDTR) {
                       struct osiop_tinfo *ti = &sc->sc_tinfo[target];
#ifdef OSIOP_DEBUG
                       if (osiopsync_debug)
                               printf("sync msg in: "
                                   "%02x %02x %02x %02x %02x %02x\n",
                                   ds->msgbuf[0], ds->msgbuf[1],
                                   ds->msgbuf[2], ds->msgbuf[3],
                                   ds->msgbuf[4], ds->msgbuf[5]);
#endif
                       ti->period = ds->msgbuf[4];
                       ti->offset = ds->msgbuf[5];
                       ti->sxfer = 0;
                       ti->sbcl = 0;
                       if (ds->msgbuf[5] != 0)
                               scsi_period_to_osiop(sc, target);
                       osiop_update_xfer_mode(sc, target);

                       bus_dmamap_sync(sc->sc_dmat, dsdma,
                           acb->dsoffset, sizeof(struct osiop_ds),
                           BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
                       osiop_write_1(sc, OSIOP_SXFER, ti->sxfer);
                       osiop_write_1(sc, OSIOP_SBCL, ti->sbcl);
                       if (ti->state == NEG_WAITS) {
                               ti->state = NEG_DONE;
                               osiop_write_4(sc, OSIOP_DSP,
                                   scraddr + Ent_clear_ack);
                               return (0);
                       }
                       osiop_write_1(sc, OSIOP_DCNTL,
                           osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
                       ti->state = NEG_DONE;
                       return (0);
               }
               /* XXX - not SDTR message */
       }
       if (sstat0 & OSIOP_SSTAT0_M_A) {
               /* Phase mismatch */
#ifdef OSIOP_DEBUG
               osiopphmm++;
#endif
               if (acb == NULL) {
                       printf("%s: Phase mismatch with no active command?\n",
                           device_xname(sc->sc_dev));
                       goto bad_phase;
               }
               if (acb->datalen > 0) {
                       int adjust = (dfifo - (dbc & 0x7f)) & 0x7f;
                       if (sstat1 & OSIOP_SSTAT1_ORF)
                               adjust++;
                       if (sstat1 & OSIOP_SSTAT1_OLF)
                               adjust++;
                       acb->curaddr = osiop_read_4(sc, OSIOP_DNAD) - adjust;
                       acb->curlen = dbc + adjust;
#ifdef OSIOP_DEBUG
                       if (osiop_debug & DEBUG_DISC) {
                               printf("Phase mismatch: curaddr %lx "
                                   "curlen %lx dfifo %x dbc %x sstat1 %x "
                                   "adjust %x sbcl %x starts %d acb %p\n",
                                   acb->curaddr, acb->curlen, dfifo,
                                   dbc, sstat1, adjust,
                                   osiop_read_1(sc, OSIOP_SBCL),
                                   osiopstarts, acb);
                               if (ds->data[1].count != 0) {
                                       int i;
                                       for (i = 0; ds->data[i].count != 0; i++)
                                               printf("chain[%d] "
                                                   "addr %x len %x\n", i,
                                                   ds->data[i].addr,
                                                   ds->data[i].count);
                               }
                               bus_dmamap_sync(sc->sc_dmat, dsdma,
                                   acb->dsoffset, sizeof(struct osiop_ds),
                                   BUS_DMASYNC_PREREAD |
                                   BUS_DMASYNC_PREWRITE);
                       }
#endif
               }
#ifdef OSIOP_DEBUG
               OSIOP_TRACE('m', osiop_read_1(sc, OSIOP_SBCL),
                   osiop_read_4(sc, OSIOP_DSP) >> 8,
                   osiop_read_4(sc, OSIOP_DSP));
               if (osiop_debug & DEBUG_PHASE)
                       printf("Phase mismatch: %x dsp +%lx dcmd %x\n",
                           osiop_read_1(sc, OSIOP_SBCL),
                           osiop_read_4(sc, OSIOP_DSP) - scraddr,
                           osiop_read_4(sc, OSIOP_DBC));
#endif
               if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_REQ) == 0) {
                       printf("Phase mismatch: "
                           "REQ not asserted! %02x dsp %x\n",
                           osiop_read_1(sc, OSIOP_SBCL),
                           osiop_read_4(sc, OSIOP_DSP));
#if defined(OSIOP_DEBUG) && defined(DDB)
                       /*Debugger(); XXX is*/
#endif
               }
               switch (OSIOP_PHASE(osiop_read_1(sc, OSIOP_SBCL))) {
               case DATA_OUT_PHASE:
               case DATA_IN_PHASE:
               case STATUS_PHASE:
               case COMMAND_PHASE:
               case MSG_IN_PHASE:
               case MSG_OUT_PHASE:
                       osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_switch);
                       break;
               default:
                       printf("%s: invalid phase\n", device_xname(sc->sc_dev));
                       goto bad_phase;
               }
               return (0);
       }
       if (sstat0 & OSIOP_SSTAT0_STO) {
               /* Select timed out */
               if (acb == NULL) {
                       printf("%s: Select timeout with no active command?\n",
                           device_xname(sc->sc_dev));
                       goto bad_phase;
               }
#ifdef OSIOP_DEBUG
               if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
                       printf("ACK! osiop was busy at timeout: "
                           "script %p dsa %lx\n", sc->sc_script,
                           dsdma->dm_segs[0].ds_addr + acb->dsoffset);
                       printf(" sbcl %x sdid %x "
                           "istat %x dstat %x sstat0 %x\n",
                           osiop_read_1(sc, OSIOP_SBCL),
                           osiop_read_1(sc, OSIOP_SDID),
                           istat, dstat, sstat0);
                       if ((osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) == 0) {
                               printf("Yikes, it's not busy now!\n");
#if 0
                               *status = SCSI_OSIOP_NOSTATUS;
                               if (!TAILQ_EMPTY(&sc->nexus_list))
                                       osiop_write_4(sc, OSIOP_DSP,
                                           scraddr + Ent_wait_reselect);
                               return (1);
#endif
                       }
#if 0
                       osiop_write_1(sc, OSIOP_DCNTL,
                           osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
#endif
#ifdef DDB
                       Debugger();
#endif
                       return (0);
               }
#endif
               acb->status = ACB_S_DONE;
               *status = SCSI_OSIOP_NOSTATUS;
               acb->xs->error = XS_SELTIMEOUT;
               if (!TAILQ_EMPTY(&sc->nexus_list))
                       osiop_write_4(sc, OSIOP_DSP,
                           scraddr + Ent_wait_reselect);
               return (1);
       }
       if (acb != NULL)
               target = acb->xs->xs_periph->periph_target;
       else
               target = sc->sc_id;
       if (sstat0 & OSIOP_SSTAT0_UDC) {
               printf("%s: target %d disconnected unexpectedly",
                   device_xname(sc->sc_dev), target);
               if (acb == NULL)
                       printf("with no active command?");
               printf("\n");
#if 0
               osiop_abort(sc, "osiop_chkintr");
#endif
               *status = SCSI_CHECK;
               if (!TAILQ_EMPTY(&sc->nexus_list))
                       osiop_write_4(sc, OSIOP_DSP,
                           scraddr + Ent_wait_reselect);
               return (acb != NULL);
       }
       if (dstat & OSIOP_DSTAT_SIR &&
           (intcode == A_int_disc || intcode == A_int_disc_wodp)) {
               /* Disconnect */
               if (acb == NULL) {
                       printf("%s: Disconnect with no active command?\n",
                           device_xname(sc->sc_dev));
                       return (0);
               }
#ifdef OSIOP_DEBUG
               if (osiop_debug & DEBUG_DISC) {
                       printf("%s: ID %02x disconnected TEMP %x (+%lx) "
                           "curaddr %lx curlen %lx buf %x len %x dfifo %x "
                           "dbc %x sstat1 %x starts %d acb %p\n",
                           device_xname(sc->sc_dev), 1 << target,
                           osiop_read_4(sc, OSIOP_TEMP),
                           (osiop_read_4(sc, OSIOP_TEMP) != 0) ?
                               osiop_read_4(sc, OSIOP_TEMP) - scraddr : 0,
                           acb->curaddr, acb->curlen,
                           ds->data[0].addr, ds->data[0].count,
                           dfifo, dbc, sstat1, osiopstarts, acb);
                       bus_dmamap_sync(sc->sc_dmat, dsdma,
                           acb->dsoffset, sizeof(struct osiop_ds),
                           BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
               }
#endif
               /*
                * XXXX need to update curaddr/curlen to reflect
                * current data transferred.  If device disconnected in
                * the middle of a DMA block, they should already be set
                * by the phase change interrupt.  If the disconnect
                * occurs on a DMA block boundary, we have to figure out
                * which DMA block it was.
                */
               if (acb->datalen > 0 &&
                   osiop_read_4(sc, OSIOP_TEMP) != 0) {
                       long n = osiop_read_4(sc, OSIOP_TEMP) - scraddr;

                       if (acb->curlen != 0 &&
                           acb->curlen != ds->data[0].count)
                               printf("%s: curaddr/curlen already set? "
                                   "n %lx iob %lx/%lx chain[0] %x/%x\n",
                                   device_xname(sc->sc_dev), n,
                                   acb->curaddr, acb->curlen,
                                   ds->data[0].addr, ds->data[0].count);
                       if (n < Ent_datain)
                               n = (n - Ent_dataout) / 16;
                       else
                               n = (n - Ent_datain) / 16;
                       if (n < 0 || n >= OSIOP_NSG)
                               printf("TEMP invalid %ld\n", n);
                       else {
                               acb->curaddr = ds->data[n].addr;
                               acb->curlen = ds->data[n].count;
                       }
#ifdef OSIOP_DEBUG
                       if (osiop_debug & DEBUG_DISC) {
                               printf("%s: TEMP offset %ld",
                                   device_xname(sc->sc_dev), n);
                               printf(" curaddr %lx curlen %lx\n",
                                   acb->curaddr, acb->curlen);
                       }
#endif
               }
               /*
                * If data transfer was interrupted by disconnect, curaddr
                * and curlen should reflect the point of interruption.
                * Adjust the DMA chain so that the data transfer begins
                * at the appropriate place upon reselection.
                * XXX This should only be done on save data pointer message?
                */
               if (acb->curlen > 0) {
                       int i, j;

#ifdef OSIOP_DEBUG
                       if (osiop_debug & DEBUG_DISC)
                               printf("%s: adjusting DMA chain\n",
                                   device_xname(sc->sc_dev));
                       if (intcode == A_int_disc_wodp)
                               printf("%s: ID %02x disconnected "
                                   "without Save Data Pointers\n",
                                   device_xname(sc->sc_dev), 1 << target);
#endif
                       for (i = 0; i < OSIOP_NSG; i++) {
                               if (ds->data[i].count == 0)
                                       break;
                               if (acb->curaddr >= ds->data[i].addr &&
                                   acb->curaddr <
                                   (ds->data[i].addr + ds->data[i].count))
                                       break;
                       }
                       if (i >= OSIOP_NSG || ds->data[i].count == 0) {
                               printf("couldn't find saved data pointer: "
                                   "curaddr %lx curlen %lx i %d\n",
                                   acb->curaddr, acb->curlen, i);
#ifdef DDB
                               Debugger();
#endif
                       }
#ifdef OSIOP_DEBUG
                       if (osiop_debug & DEBUG_DISC)
                               printf(" chain[0]: %x/%x -> %lx/%lx\n",
                                   ds->data[0].addr, ds->data[0].count,
                                   acb->curaddr, acb->curlen);
#endif
                       ds->data[0].addr = acb->curaddr;
                       ds->data[0].count = acb->curlen;
                       for (j = 1, i = i + 1;
                           i < OSIOP_NSG && ds->data[i].count > 0;
                           i++, j++) {
#ifdef OSIOP_DEBUG
                               if (osiop_debug & DEBUG_DISC)
                                       printf("  chain[%d]: %x/%x -> %x/%x\n",
                                           j, ds->data[j].addr,
                                           ds->data[j].count,
                                           ds->data[i].addr,
                                           ds->data[i].count);
#endif
                               ds->data[j].addr  = ds->data[i].addr;
                               ds->data[j].count = ds->data[i].count;
                       }
                       if (j < OSIOP_NSG) {
                               ds->data[j].addr  = 0;
                               ds->data[j].count = 0;
                       }
                       bus_dmamap_sync(sc->sc_dmat, dsdma,
                           acb->dsoffset, sizeof(struct osiop_ds),
                           BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
               }
               sc->sc_tinfo[target].dconns++;
               /*
                * add nexus to waiting list
                * clear nexus
                * try to start another command for another target/lun
                */
               acb->intstat = sc->sc_flags & OSIOP_INTSOFF;
               TAILQ_INSERT_TAIL(&sc->nexus_list, acb, chain);
               sc->sc_nexus = NULL;            /* no current device */
               osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_wait_reselect);
               /* XXXX start another command ? */
               if (!TAILQ_EMPTY(&sc->ready_list))
                       osiop_sched(sc);
               return (0);
       }
       if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_reconnect) {
               int reselid = ffs(osiop_read_4(sc, OSIOP_SCRATCH) & 0xff) - 1;
               int reselun = osiop_read_1(sc, OSIOP_SFBR) & 0x07;
#ifdef OSIOP_DEBUG
               uint8_t resmsg;
#endif

               /* Reconnect */
               /* XXXX save current SBCL */
               sc->sc_sstat1 = osiop_read_1(sc, OSIOP_SBCL);
#ifdef OSIOP_DEBUG
               if (osiop_debug & DEBUG_DISC)
                       printf("%s: target ID %02x reselected dsps %x\n",
                           device_xname(sc->sc_dev), reselid, intcode);
               resmsg = osiop_read_1(sc, OSIOP_SFBR);
               if (!MSG_ISIDENTIFY(resmsg))
                       printf("%s: Reselect message in was not identify: "
                           "%02x\n", device_xname(sc->sc_dev), resmsg);
#endif
               if (sc->sc_nexus != NULL) {
                       struct scsipi_periph *periph =
                           sc->sc_nexus->xs->xs_periph;
#ifdef OSIOP_DEBUG
                       if (osiop_debug & DEBUG_DISC)
                               printf("%s: reselect ID %02x w/active\n",
                                   device_xname(sc->sc_dev), reselid);
#endif
                       TAILQ_INSERT_HEAD(&sc->ready_list,
                           sc->sc_nexus, chain);
                       sc->sc_tinfo[periph->periph_target].lubusy
                           &= ~(1 << periph->periph_lun);
                       sc->sc_active--;
               }
               /*
                * locate acb of reselecting device
                * set sc->sc_nexus to acb
                */
               TAILQ_FOREACH(acb, &sc->nexus_list, chain) {
                       struct scsipi_periph *periph = acb->xs->xs_periph;
                       if (reselid != periph->periph_target ||
                           reselun != periph->periph_lun) {
                               continue;
                       }
                       TAILQ_REMOVE(&sc->nexus_list, acb, chain);
                       sc->sc_nexus = acb;
                       sc->sc_flags |= acb->intstat;
                       acb->intstat = 0;
                       osiop_write_4(sc, OSIOP_DSA,
                           dsdma->dm_segs[0].ds_addr + acb->dsoffset);
                       osiop_write_1(sc, OSIOP_SXFER,
                           sc->sc_tinfo[reselid].sxfer);
                       osiop_write_1(sc, OSIOP_SBCL,
                           sc->sc_tinfo[reselid].sbcl);
                       break;
               }
               if (acb == NULL) {
                       printf("%s: target ID %02x reselect nexus_list %p\n",
                           device_xname(sc->sc_dev), reselid,
                           TAILQ_FIRST(&sc->nexus_list));
                       panic("unable to find reselecting device");
               }

               osiop_write_4(sc, OSIOP_TEMP, 0);
               osiop_write_1(sc, OSIOP_DCNTL,
                   osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
               return (0);
       }
       if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_connect) {
#ifdef OSIOP_DEBUG
               uint8_t ctest2 = osiop_read_1(sc, OSIOP_CTEST2);

               /* reselect was interrupted (by Sig_P or select) */
               if (osiop_debug & DEBUG_DISC ||
                   (ctest2 & OSIOP_CTEST2_SIGP) == 0)
                       printf("%s: reselect interrupted (Sig_P?) "
                           "scntl1 %x ctest2 %x sfbr %x istat %x/%x\n",
                           device_xname(sc->sc_dev),
                           osiop_read_1(sc, OSIOP_SCNTL1), ctest2,
                           osiop_read_1(sc, OSIOP_SFBR), istat,
                           osiop_read_1(sc, OSIOP_ISTAT));
#endif
               /* XXX assumes it was not select */
               if (sc->sc_nexus == NULL) {
#ifdef OSIOP_DEBUG
                       printf("%s: reselect interrupted, sc_nexus == NULL\n",
                           device_xname(sc->sc_dev));
#if 0
                       osiop_dump(sc);
#ifdef DDB
                       Debugger();
#endif
#endif
#endif
                       osiop_write_1(sc, OSIOP_DCNTL,
                           osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
                       return (0);
               }
               target = sc->sc_nexus->xs->xs_periph->periph_target;
               osiop_write_4(sc, OSIOP_TEMP, 0);
               osiop_write_4(sc, OSIOP_DSA,
                   dsdma->dm_segs[0].ds_addr + sc->sc_nexus->dsoffset);
               osiop_write_1(sc, OSIOP_SXFER, sc->sc_tinfo[target].sxfer);
               osiop_write_1(sc, OSIOP_SBCL, sc->sc_tinfo[target].sbcl);
               osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_scripts);
               return (0);
       }
       if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_msgin) {
               /* Unrecognized message in byte */
               if (acb == NULL) {
                       printf("%s: Bad message-in with no active command?\n",
                           device_xname(sc->sc_dev));
                       goto bad_phase;
               }
               printf("%s: Unrecognized message in data "
                   "sfbr %x msg %x sbcl %x\n", device_xname(sc->sc_dev),
                   osiop_read_1(sc, OSIOP_SFBR), ds->msgbuf[1],
                   osiop_read_1(sc, OSIOP_SBCL));
               /* what should be done here? */
               osiop_write_4(sc, OSIOP_DSP, scraddr + Ent_clear_ack);
               bus_dmamap_sync(sc->sc_dmat, dsdma,
                   acb->dsoffset, sizeof(struct osiop_ds),
                   BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
               return (0);
       }
       if (dstat & OSIOP_DSTAT_SIR && intcode == A_int_status) {
               /* Status phase wasn't followed by message in phase? */
               printf("%s: Status phase not followed by message in phase? "
                   "sbcl %x sbdl %x\n", device_xname(sc->sc_dev),
                   osiop_read_1(sc, OSIOP_SBCL),
                   osiop_read_1(sc, OSIOP_SBDL));
               if (osiop_read_1(sc, OSIOP_SBCL) == 0xa7) {
                       /* It is now, just continue the script? */
                       osiop_write_1(sc, OSIOP_DCNTL,
                           osiop_read_1(sc, OSIOP_DCNTL) | OSIOP_DCNTL_STD);
                       return (0);
               }
       }
       if (dstat & OSIOP_DSTAT_SIR && sstat0 == 0) {
               printf("OSIOP interrupt: %x sts %x msg %x %x sbcl %x\n",
                   intcode, ds->stat[0], ds->msgbuf[0], ds->msgbuf[1],
                   osiop_read_1(sc, OSIOP_SBCL));
               osiop_reset(sc);
               *status = SCSI_OSIOP_NOSTATUS;
               return (0);     /* osiop_reset has cleaned up */
       }
       if (sstat0 & OSIOP_SSTAT0_SGE)
               printf("%s: SCSI Gross Error\n", device_xname(sc->sc_dev));
       if (sstat0 & OSIOP_SSTAT0_PAR)
               printf("%s: Parity Error\n", device_xname(sc->sc_dev));
       if (dstat & OSIOP_DSTAT_IID)
               printf("%s: Invalid instruction detected\n",
                   device_xname(sc->sc_dev));
bad_phase:
       /*
        * temporary panic for unhandled conditions
        * displays various things about the 53C710 status and registers
        * then panics.
        * XXXX need to clean this up to print out the info, reset, and continue
        */
       printf("osiop_chkintr: target %x ds %p\n", target, ds);
       printf("scripts %lx ds %lx dsp %x dcmd %x\n", scraddr,
           acb ? sc->sc_dsdma->dm_segs[0].ds_addr + acb->dsoffset : 0,
           osiop_read_4(sc, OSIOP_DSP),
           osiop_read_4(sc, OSIOP_DBC));
       printf("osiop_chkintr: istat %x dstat %x sstat0 %x "
           "dsps %x dsa %x sbcl %x sts %x msg %x %x sfbr %x\n",
           istat, dstat, sstat0, intcode,
           osiop_read_4(sc, OSIOP_DSA),
           osiop_read_1(sc, OSIOP_SBCL),
           ds ? ds->stat[0] : 0,
           ds ? ds->msgbuf[0] : 0,
           ds ? ds->msgbuf[1] : 0,
           osiop_read_1(sc, OSIOP_SFBR));
#ifdef OSIOP_DEBUG
       if (osiop_debug & DEBUG_DMA)
               panic("osiop_chkintr: **** temp ****");
#ifdef DDB
       Debugger();
#endif
#endif
       osiop_reset(sc);        /* hard reset */
       *status = SCSI_OSIOP_NOSTATUS;
       if (acb != NULL)
               acb->status = ACB_S_DONE;
       return (0);             /* osiop_reset cleaned up */
}

void
osiop_select(struct osiop_softc *sc)
{
       struct osiop_acb *acb = sc->sc_nexus;

#ifdef OSIOP_DEBUG
       if (osiop_debug & DEBUG_CMD)
               printf("%s: select ", device_xname(sc->sc_dev));
#endif

       if (acb->xs->xs_control & XS_CTL_POLL || sc->sc_flags & OSIOP_NODMA) {
               sc->sc_flags |= OSIOP_INTSOFF;
               sc->sc_flags &= ~OSIOP_INTDEFER;
               if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
                       osiop_write_1(sc, OSIOP_SIEN, 0);
                       osiop_write_1(sc, OSIOP_DIEN, 0);
               }
#if 0
       } else if ((sc->sc_flags & OSIOP_INTDEFER) == 0) {
               sc->sc_flags &= ~OSIOP_INTSOFF;
               if ((osiop_read_1(sc, OSIOP_ISTAT) & OSIOP_ISTAT_CON) == 0) {
                       osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
                       osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
               }
#endif
       }
#ifdef OSIOP_DEBUG
       if (osiop_debug & DEBUG_CMD)
               printf("osiop_select: target %x cmd %02x ds %p\n",
                   acb->xs->xs_periph->periph_target,
                   acb->xs->cmd->opcode, sc->sc_nexus->ds);
#endif

       osiop_start(sc);

       return;
}

/*
* 53C710 interrupt handler
*/

void
osiop_intr(struct osiop_softc *sc)
{
       int status, s;
       uint8_t istat, dstat, sstat0;

       s = splbio();

       istat = sc->sc_istat;
       if ((istat & (OSIOP_ISTAT_SIP | OSIOP_ISTAT_DIP)) == 0) {
               splx(s);
               return;
       }

       /* Got a valid interrupt on this device; set by MD handler */
       dstat = sc->sc_dstat;
       sstat0 = sc->sc_sstat0;
       sc->sc_istat = 0;
#ifdef OSIOP_DEBUG
       if (!sc->sc_active) {
               /* XXX needs sync */
               printf("%s: spurious interrupt? "
                   "istat %x dstat %x sstat0 %x nexus %p status %x\n",
                   device_xname(sc->sc_dev),
                   istat, dstat, sstat0, sc->sc_nexus,
                   (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0);
       }
#endif

#ifdef OSIOP_DEBUG
       if (osiop_debug & (DEBUG_INT|DEBUG_CMD)) {
               /* XXX needs sync */
               printf("%s: intr istat %x dstat %x sstat0 %x dsps %x "
                   "sbcl %x dsp %x dcmd %x sts %x msg %x\n",
                   device_xname(sc->sc_dev),
                   istat, dstat, sstat0,
                   osiop_read_4(sc, OSIOP_DSPS),
                   osiop_read_1(sc, OSIOP_SBCL),
                   osiop_read_4(sc, OSIOP_DSP),
                   osiop_read_4(sc, OSIOP_DBC),
                   (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->stat[0] : 0,
                   (sc->sc_nexus != NULL) ? sc->sc_nexus->ds->msgbuf[0] : 0);
       }
#endif
       if (sc->sc_flags & OSIOP_INTDEFER) {
               sc->sc_flags &= ~(OSIOP_INTDEFER | OSIOP_INTSOFF);
               osiop_write_1(sc, OSIOP_SIEN, sc->sc_sien);
               osiop_write_1(sc, OSIOP_DIEN, sc->sc_dien);
       }
       if (osiop_checkintr(sc, istat, dstat, sstat0, &status)) {
#if 0
               if (status == SCSI_OSIOP_NOSTATUS)
                       printf("osiop_intr: no valid status \n");
#endif
               if ((sc->sc_flags & (OSIOP_INTSOFF | OSIOP_INTDEFER)) !=
                   OSIOP_INTSOFF) {
#if 0
                       if (osiop_read_1(sc, OSIOP_SBCL) & OSIOP_BSY) {
                               struct scsipi_periph *periph;

                               periph = sc->sc_nexus->xs->xs_periph;
                               printf("%s: SCSI bus busy at completion"
                                   " targ %d sbcl %02x sfbr %x lcrc "
                                   "%02x dsp +%x\n", device_xname(sc->sc_dev),
                                   periph->periphtarget,
                                   osiop_read_1(sc, OSIOP_SBCL),
                                   osiop_read_1(sc, OSIOP_SFBR),
                                   osiop_read_1(sc, OSIOP_LCRC),
                                   osiop_read_4(sc, OSIOP_DSP) -
                                       sc->sc_scrdma->dm_segs[0].ds_addr);
                       }
#endif
                       osiop_scsidone(sc->sc_nexus, status);
               }
       }
       splx(s);
}

void
osiop_update_xfer_mode(struct osiop_softc *sc, int target)
{
       struct osiop_tinfo *tinfo = &sc->sc_tinfo[target];
       struct scsipi_xfer_mode xm;

       xm.xm_target = target;
       xm.xm_mode = 0;
       xm.xm_period = 0;
       xm.xm_offset = 0;

       if (tinfo->period) {
               xm.xm_mode |= PERIPH_CAP_SYNC;
               xm.xm_period = tinfo->period;
               xm.xm_offset = tinfo->offset;
       }

       scsipi_async_event(&sc->sc_channel, ASYNC_EVENT_XFER_MODE, &xm);
}

void
scsi_period_to_osiop(struct osiop_softc *sc, int target)
{
       int period, offset, sxfer, sbcl;

       period = sc->sc_tinfo[target].period;
       offset = sc->sc_tinfo[target].offset;
       for (sbcl = 1; sbcl < 4; sbcl++) {
               sxfer = (period * 4 - 1) / sc->sc_tcp[sbcl] - 3;
               if (sxfer >= 0 && sxfer <= 7)
                       break;
       }
       if (sbcl > 3) {
               printf("osiop sync: unable to compute sync params "
                   "for period %d ns\n", period * 4);
               /*
                * XXX need to pick a value we can do and renegotiate
                */
               sxfer = sbcl = 0;
       } else {
               sxfer = (sxfer << 4) | ((offset <= OSIOP_MAX_OFFSET) ?
                   offset : OSIOP_MAX_OFFSET);
#ifdef DEBUG_SYNC
               printf("osiop sync: params for period %dns: sxfer %x sbcl %x",
                   period * 4, sxfer, sbcl);
               printf(" actual period %dns\n",
                   sc->sc_tcp[sbcl] * ((sxfer >> 4) + 4));
#endif
       }
       sc->sc_tinfo[target].sxfer = sxfer;
       sc->sc_tinfo[target].sbcl = sbcl;
#ifdef DEBUG_SYNC
       printf("osiop sync: osiop_sxfr %02x, osiop_sbcl %02x\n", sxfer, sbcl);
#endif
}

void
osiop_timeout(void *arg)
{
       struct osiop_acb *acb = arg;
       struct scsipi_xfer *xs = acb->xs;
       struct osiop_softc *sc = acb->sc;
       int s;

       scsipi_printaddr(xs->xs_periph);
       printf("command timeout\n");

       s = splbio();
       /* reset the scsi bus */
       osiop_resetbus(sc);

       /* deactivate callout */
       callout_stop(&xs->xs_callout);
       acb->flags |= ACB_F_TIMEOUT;
       osiop_reset(sc);
       splx(s);
       return;
}

#ifdef OSIOP_DEBUG

#if OSIOP_TRACE_SIZE
void
osiop_dump_trace(void)
{
       int i;

       printf("osiop trace: next index %d\n", osiop_trix);
       i = osiop_trix;
       do {
               printf("%3d: '%c' %02x %02x %02x\n", i,
                   osiop_trbuf[i], osiop_trbuf[i + 1],
                   osiop_trbuf[i + 2], osiop_trbuf[i + 3]);
               i = (i + 4) & (OSIOP_TRACE_SIZE - 1);
       } while (i != osiop_trix);
}
#endif

void
osiop_dump_acb(struct osiop_acb *acb)
{
       uint8_t *b;
       int i;

       printf("acb@%p ", acb);
       if (acb->xs == NULL) {
               printf("<unused>\n");
               return;
       }

       b = (uint8_t *)&acb->xs->cmd;
       printf("(%d:%d) status %2x cmdlen %2ld cmd ",
           acb->xs->xs_periph->periph_target,
           acb->xs->xs_periph->periph_lun, acb->status, acb->cmdlen);
       for (i = acb->cmdlen; i > 0; i--)
               printf(" %02x", *b++);
       printf("\n");
       printf("  xs: %p data %p:%04x ", acb->xs, acb->xs->data,
           acb->xs->datalen);
       printf("va %p:%lx ", acb->data, acb->datalen);
       printf("cur %lx:%lx\n", acb->curaddr, acb->curlen);
}

void
osiop_dump(struct osiop_softc *sc)
{
       struct osiop_acb *acb;
       int i, s;

       s = splbio();
#if OSIOP_TRACE_SIZE
       osiop_dump_trace();
#endif
       printf("%s@%p istat %02x\n",
           device_xname(sc->sc_dev), sc, osiop_read_1(sc, OSIOP_ISTAT));
       if ((acb = TAILQ_FIRST(&sc->free_list)) != NULL) {
               printf("Free list:\n");
               while (acb) {
                       osiop_dump_acb(acb);
                       acb = TAILQ_NEXT(acb, chain);
               }
       }
       if ((acb = TAILQ_FIRST(&sc->ready_list)) != NULL) {
               printf("Ready list:\n");
               while (acb) {
                       osiop_dump_acb(acb);
                       acb = TAILQ_NEXT(acb, chain);
               }
       }
       if ((acb = TAILQ_FIRST(&sc->nexus_list)) != NULL) {
               printf("Nexus list:\n");
               while (acb) {
                       osiop_dump_acb(acb);
                       acb = TAILQ_NEXT(acb, chain);
               }
       }
       if (sc->sc_nexus) {
               printf("Nexus:\n");
               osiop_dump_acb(sc->sc_nexus);
       }
       for (i = 0; i < OSIOP_NTGT; i++) {
               if (sc->sc_tinfo[i].cmds > 2) {
                       printf("tgt %d: cmds %d disc %d lubusy %x\n",
                           i, sc->sc_tinfo[i].cmds,
                           sc->sc_tinfo[i].dconns,
                           sc->sc_tinfo[i].lubusy);
               }
       }
       splx(s);
}
#endif