/*      $NetBSD: cyvar.h,v 1.9 2008/03/26 17:50:32 matt Exp $   */

/*
* cy_var.h
*
* Driver for Cyclades Cyclom-8/16/32 multiport serial cards
* (currently not tested with Cyclom-32 cards)
*
* Timo Rossi, 1996
*
* Supports both ISA and PCI Cyclom cards
*/

/* #define CY_DEBUG */
#define CY_DEBUG1

/*
* Maximum number of ports per card
*/
#define CY_MAX_PORTS            (CD1400_NO_OF_CHANNELS * CY_MAX_CD1400s)

#define CY_RX_FIFO_THRESHOLD  6

/*
* Automatic RTS (or actually DTR, the RTS and DTR lines need to be
* exchanged) handshake threshold used if CY_HW_RTS is defined
*/
#define CY_RX_DTR_THRESHOLD   9

/*
* read/write cd1400 registers (when sc_softc-structure is available)
*/
#define cd_read_reg(sc,chip,reg) bus_space_read_1(sc->sc_memt, \
   sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
   (((reg << 1)) << sc->sc_bustype))

#define cd_write_reg(sc,chip,reg,val) bus_space_write_1(sc->sc_memt, \
   sc->sc_bsh, sc->sc_cd1400_offs[chip] + \
   (((reg << 1))<< sc->sc_bustype), (val))

/*
* ibuf is a simple ring buffer. It is always used two
* bytes at a time (status and data)
*/
#define CY_IBUF_SIZE (2*512)

/* software state for one port */
struct cy_port {
       struct cy_softc *cy_softc;
       int             cy_port_num;
       int             cy_chip;
       int             cy_clock;
       struct tty     *cy_tty;
       int             cy_openflags;
       int             cy_fifo_overruns;
       int             cy_ibuf_overruns;
       u_char          cy_channel_control;     /* last CCR channel control
                                                * command bits */
       u_char          cy_carrier_stat;        /* copied from MSVR2 */
       u_char          cy_flags;
       u_char         *cy_ibuf, *cy_ibuf_end;
       u_char         *cy_ibuf_rd_ptr, *cy_ibuf_wr_ptr;
#ifdef CY_DEBUG1
       int             cy_rx_int_count;
       int             cy_tx_int_count;
       int             cy_modem_int_count;
       int             cy_start_count;
#endif /* CY_DEBUG1 */
};

#define CY_F_CARRIER_CHANGED  0x01
#define CY_F_START_BREAK      0x02
#define CY_F_END_BREAK        0x04
#define CY_F_STOP             0x08
#define CY_F_SEND_NUL         0x10
#define CY_F_START            0x20

/* software state for one card */
struct cy_softc {
       device_t        sc_dev;
       void           *sc_ih;
       bus_space_tag_t sc_memt;
       bus_space_handle_t sc_bsh;
       int             sc_bustype;
       int             sc_nchips;      /* Number of cd1400's on this card */
       int             sc_cd1400_offs[CY_MAX_CD1400s];
       struct cy_port  sc_ports[CY_MAX_PORTS];
       int             sc_nchannels;   /* total number of ports */
#ifdef CY_DEBUG1
       int             sc_poll_count1;
       int             sc_poll_count2;
#endif
};

int     cy_find(struct cy_softc *);
void    cy_attach(struct cy_softc *);
int     cy_intr(void *);