/*      $NetBSD: dwc2_fdt.c,v 1.13 2023/07/31 04:59:47 rin Exp $        */

/*-
* Copyright (c) 2013 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Nick Hudson
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: dwc2_fdt.c,v 1.13 2023/07/31 04:59:47 rin Exp $");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mutex.h>
#include <sys/bus.h>
#include <sys/workqueue.h>

#include <dev/fdt/fdtvar.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>

#include <dwc2/dwc2var.h>

#include <dwc2/dwc2.h>
#include "dwc2_core.h"

struct dwc2_fdt_softc {
       struct dwc2_softc       sc_dwc2;

       struct dwc2_core_params sc_params;

       void                    *sc_ih;
       int                     sc_phandle;
};

static int dwc2_fdt_match(device_t, struct cfdata *, void *);
static void dwc2_fdt_attach(device_t, device_t, void *);
static void dwc2_fdt_deferred(device_t);

static void dwc2_fdt_amlogic_params(struct dwc2_fdt_softc *, struct dwc2_core_params *);
static void dwc2_fdt_rockchip_params(struct dwc2_fdt_softc *, struct dwc2_core_params *);

struct dwc2_fdt_config {
       void    (*params)(struct dwc2_fdt_softc *, struct dwc2_core_params *);
};

static const struct dwc2_fdt_config dwc2_fdt_rk3066_config = {
       .params = dwc2_fdt_rockchip_params,
};

static const struct dwc2_fdt_config dwc2_fdt_meson8b_config = {
       .params = dwc2_fdt_amlogic_params,
};

static const struct dwc2_fdt_config dwc2_fdt_generic_config = {
};

static const struct device_compatible_entry compat_data[] = {
       { .compat = "amlogic,meson8b-usb",
         .data = &dwc2_fdt_meson8b_config },
       { .compat = "amlogic,meson-gxbb-usb",
         .data = &dwc2_fdt_meson8b_config },
       { .compat = "rockchip,rk3066-usb",
         .data = &dwc2_fdt_rk3066_config },
       { .compat = "snps,dwc2",
         .data = &dwc2_fdt_generic_config },

       DEVICE_COMPAT_EOL
};

CFATTACH_DECL_NEW(dwc2_fdt, sizeof(struct dwc2_fdt_softc),
   dwc2_fdt_match, dwc2_fdt_attach, NULL, NULL);

/* ARGSUSED */
static int
dwc2_fdt_match(device_t parent, struct cfdata *match, void *aux)
{
       struct fdt_attach_args * const faa = aux;

       return of_compatible_match(faa->faa_phandle, compat_data);
}

/* ARGSUSED */
static void
dwc2_fdt_attach(device_t parent, device_t self, void *aux)
{
       struct dwc2_fdt_softc *sc = device_private(self);
       struct fdt_attach_args * const faa = aux;
       const int phandle = faa->faa_phandle;
       const struct dwc2_fdt_config *conf =
           of_compatible_lookup(phandle, compat_data)->data;
       char intrstr[128];
       struct fdtbus_phy *phy;
       struct clk *clk;
       bus_addr_t addr;
       bus_size_t size;
       int error;

       const char *dr_mode = fdtbus_get_string(phandle, "dr_mode");
       if (dr_mode == NULL || strcmp(dr_mode, "host") != 0) {
               aprint_error(": mode '%s' not supported\n", dr_mode);
               return;
       }

       if (fdtbus_get_reg(phandle, 0, &addr, &size) != 0) {
               aprint_error(": couldn't get registers\n");
               return;
       }

       clk = fdtbus_clock_get(phandle, "otg");
       if (clk == NULL || clk_enable(clk) != 0) {
               aprint_error(": couldn't enable otg clock\n");
               return;
       }

       /* Enable optional phy */
       phy = fdtbus_phy_get(phandle, "usb2-phy");
       if (phy && fdtbus_phy_enable(phy, true) != 0) {
               aprint_error(": couldn't enable phy\n");
               return;
       }

       sc->sc_phandle = phandle;
       sc->sc_dwc2.sc_dev = self;
       sc->sc_dwc2.sc_iot = faa->faa_bst;
       sc->sc_dwc2.sc_bus.ub_dmatag = faa->faa_dmat;

       error = bus_space_map(faa->faa_bst, addr, size, 0, &sc->sc_dwc2.sc_ioh);
       if (error) {
               aprint_error(": couldn't map device\n");
               return;
       }

       if (conf->params) {
               conf->params(sc, &sc->sc_params);
               sc->sc_dwc2.sc_params = &sc->sc_params;
       }

       if (!fdtbus_intr_str(phandle, 0, intrstr, sizeof(intrstr))) {
               aprint_error(": failed to decode interrupt\n");
               return;
       }

       aprint_naive("\n");
       aprint_normal(": DesignWare USB2 OTG\n");

       sc->sc_ih = fdtbus_intr_establish_xname(phandle, 0, IPL_VM,
           FDT_INTR_MPSAFE, dwc2_intr, &sc->sc_dwc2, device_xname(self));
       if (sc->sc_ih == NULL) {
               aprint_error_dev(self, "failed to establish interrupt %s\n",
                   intrstr);
               goto fail;
       }
       aprint_normal_dev(self, "interrupting on %s\n", intrstr);
       config_interrupts(self, dwc2_fdt_deferred);

       return;

fail:
       if (sc->sc_ih) {
               fdtbus_intr_disestablish(sc->sc_phandle, sc->sc_ih);
               sc->sc_ih = NULL;
       }
       bus_space_unmap(sc->sc_dwc2.sc_iot, sc->sc_dwc2.sc_ioh, size);
}

static void
dwc2_fdt_deferred(device_t self)
{
       struct dwc2_fdt_softc *sc = device_private(self);
       int error;

       error = dwc2_init(&sc->sc_dwc2);
       if (error != 0) {
               aprint_error_dev(self, "couldn't initialize host, error=%d\n",
                   error);
               return;
       }
       sc->sc_dwc2.sc_child = config_found(sc->sc_dwc2.sc_dev,
           &sc->sc_dwc2.sc_bus, usbctlprint, CFARGS_NONE);
}

static void
dwc2_fdt_amlogic_params(struct dwc2_fdt_softc *sc, struct dwc2_core_params *params)
{
       dwc2_set_all_params(params, -1);

       params->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
       params->speed = DWC2_SPEED_PARAM_HIGH;
       params->dma_enable = 1;
       params->enable_dynamic_fifo = 1;
       params->host_rx_fifo_size = 512;
       params->host_nperio_tx_fifo_size = 500;
       params->host_perio_tx_fifo_size = 500;
       params->host_channels = 16;
       params->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
       params->reload_ctl = 1;
       params->ahbcfg = GAHBCFG_HBSTLEN_INCR8 << GAHBCFG_HBSTLEN_SHIFT;
#ifdef DWC2_POWER_DOWN_PARAM_NONE
       params->power_down = DWC2_POWER_DOWN_PARAM_NONE;
#endif
}

static void
dwc2_fdt_rockchip_params(struct dwc2_fdt_softc *sc, struct dwc2_core_params *params)
{
       dwc2_set_all_params(params, -1);

       params->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
       params->host_rx_fifo_size = 525;
       params->host_nperio_tx_fifo_size = 128;
       params->host_perio_tx_fifo_size = 256;
       params->ahbcfg = GAHBCFG_HBSTLEN_INCR16 << GAHBCFG_HBSTLEN_SHIFT;
}

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.