/*-
* Copyright (c) 1996 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Gordon W. Ross.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This file derived from kernel/mach/sun3.md/machMon.h from the
* sprite distribution.
*
* In particular, this file came out of the Walnut Creek cdrom collection
* which contained no warnings about any possible copyright infringement.
*/
/*
* machMon.h --
*
* Structures, constants and defines for access to the sun monitor.
* These were translated from the sun monitor header files:
* mon/sunromvec.h
* stand/saio.h
*
* Copyright (C) 1985 Regents of the University of California
* All rights reserved.
*
* Header: /sprite/src/boot/sunprom/sun3.md/RCS/machMon.h,v \
* 1.1 90/09/17 10:57:28 rab Exp Locker: rab $ SPRITE (Berkeley)
*/
/*
* The table entry that describes a device. It exists in the PROM; a
* pointer to it is passed in MachMonBootParam. It can be used to locate
* PROM subroutines for opening, reading, and writing the device.
*
* When using this interface, only one device can be open at once.
*/
struct saioreq;
struct boottab {
char b_dev[2]; /* The name of the device */
int (*b_probe)(void); /* probe() --> -1 or found controller
number */
int (*b_boot)(char *); /* boot(bp) --> -1 or start address */
int (*b_open)(struct saioreq *); /* open(iobp) --> -1 or 0 */
int (*b_close)(struct saioreq *); /* close(iobp) --> -1 or 0 */
int (*b_strategy)(struct saioreq *, int); /* strategy(iobp,rw)
-->-1 or 0 */
char *b_desc; /* Printable string describing dev */
struct devinfo *b_devinfo; /* Information to configure device */
} __attribute__((packed));
/*
* This table gives information about the resources needed by a device.
*/
struct devinfo {
unsigned int d_devbytes; /* Bytes occupied by device in IO space. */
unsigned int d_dmabytes; /* Bytes needed by device in DMA memory. */
unsigned int d_localbytes; /* Bytes needed by device for local info. */
unsigned int d_stdcount; /* How many standard addresses. */
unsigned long *d_stdaddrs; /* The vector of standard addresses. */
unsigned int d_devtype; /* What map space device is in. */
unsigned int d_maxiobytes; /* Size to break big I/O's into. */
};
/*
* These are the "page map entry types" specified in the
* d_devtype field of struct devinfo.
*/
#define MAP_MAINMEM 0
#define MAP_OBIO 1
#define MAP_MBMEM 2
#define MAP_MBIO 3
#define MAP_VME16A16D 4
#define MAP_VME16A32D 5
#define MAP_VME24A16D 6
#define MAP_VME24A32D 7
#define MAP_VME32A16D 8
#define MAP_VME32A32D 9
#define MAP__NTYPES 10
/*
* A "stand alone I/O request", (from SunOS saio.h)
* This is passed as the main argument to the PROM I/O routines
* in the MachMonBootDevice structure.
*/
struct saioreq {
char si_flgs;
char si_pad1;
struct boottab *si_boottab; /* Points to boottab entry if any */
char *si_devdata; /* Device-specific data pointer */
int si_ctlr; /* Controller number or address */
int si_unit; /* Unit number within controller */
long si_boff; /* Partition number within unit */
long si_cyloff;
long si_offset;
long si_bn; /* Block number to R/W */
char *si_ma; /* Memory address to R/W */
int si_cc; /* Character count to R/W */
struct saif *si_sif; /* net if. pointer (set by b_open) */
char *si_devaddr; /* Points to mapped in device */
char *si_dmaaddr; /* Points to allocated DMA space */
} __attribute__((packed));
/*
* Ethernet interface descriptor (from SunOS saio.h)
* First, set: saiop->si_devaddr, saiop->si_dmaaddr, etc.
* Then: saiop->si_boottab->b_open() will set:
* saiop->si_sif;
* saiop->si_devdata;
* The latter is the first arg to the following functions.
* Note that the buffer must be in DVMA space...
*/
struct saif {
/* Transmit packet, returns zero on success. */
int (*sif_xmit)(void *devdata, char *buf, int len);
/* Receive packet, return zero if none arrived. */
int (*sif_poll)(void *devdata, char *buf);
/* Reset interface, set addresses, etc. */
int (*sif_reset)(void *devdata, struct saioreq *sip);
/*
* Later proms have more stuff here, but what versions?
* It appears that all V3.X PROMs support this...
*/
/* Copy our ethernet address to the passed array. */
int (*sif_macaddr)(u_char *ea);
};
