/*      $NetBSD: lpt_ebus.c,v 1.24 2014/05/03 12:51:31 martin Exp $     */

/*
* Copyright (c) 1999, 2000 Matthew R. Green
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/

/*
* NS Super I/O PC87332VLJ "lpt" to ebus attachment
*/

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: lpt_ebus.c,v 1.24 2014/05/03 12:51:31 martin Exp $");

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/tty.h>

#include <sys/bus.h>

#include <dev/ebus/ebusreg.h>
#include <dev/ebus/ebusvar.h>

#include <dev/ic/lptvar.h>

int     lpt_ebus_match(device_t, cfdata_t , void *);
void    lpt_ebus_attach(device_t, device_t, void *);

CFATTACH_DECL_NEW(lpt_ebus, sizeof(struct lpt_softc),
   lpt_ebus_match, lpt_ebus_attach, NULL, NULL);

#define ROM_LPT_NAME    "ecpp"
#define ROM_LPT_NAME2   "parallel"

int
lpt_ebus_match(device_t parent, cfdata_t match, void *aux)
{
       struct ebus_attach_args *ea = aux;

       if (strcmp(ea->ea_name, ROM_LPT_NAME) == 0
           || strcmp(ea->ea_name, ROM_LPT_NAME2) == 0)
               return (1);

       return (0);
}

void
lpt_ebus_attach(device_t parent, device_t self, void *aux)
{
       struct lpt_softc *sc = device_private(self);
       struct ebus_attach_args *ea = aux;
       int i;

       sc->sc_dev = self;
       sc->sc_iot = ea->ea_bustag;
       /*
        * Addresses that should be supplied by the prom:
        *      - normal lpt registers
        *      - ns873xx configuration registers
        *      - DMA space
        * The `lpt' driver does not use DMA accesses, so we can
        * ignore that for now.  We should enable the lpt port in
        * the ns873xx registers here. XXX
        *
        * Use the prom address if there.
        */
       if (ea->ea_nvaddr)
               sparc_promaddr_to_handle(sc->sc_iot, ea->ea_vaddr[0],
                       &sc->sc_ioh);
       else if (bus_space_map(sc->sc_iot,
                             EBUS_ADDR_FROM_REG(&ea->ea_reg[0]),
                             ea->ea_reg[0].size,
                             0,
                             &sc->sc_ioh) != 0) {
               aprint_error(": can't map register space\n");
               return;
       }

       for (i = 0; i < ea->ea_nintr; i++)
               bus_intr_establish(ea->ea_bustag, ea->ea_intr[i],
                                  IPL_SERIAL, lptintr, sc);
       aprint_normal("\n");

       lpt_attach_subr(sc);
}