# $NetBSD: MRCOFFEE,v 1.60 2025/02/24 21:32:26 andvar Exp $
# From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp
#
# Mr.Coffee (JavaStation 1) machine description file
#
# This configuration is for machines using Open Boot Prom only!
# The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW
# kernel.
#
include "arch/sparc/conf/std.sparc"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "MRCOFFEE-$Revision: 1.60 $"
maxusers 32
## System kernel configuration. See options(4) for more detail.
# Options for variants of the Sun SPARC architecture.
# We currently support three architecture types; at least one is required.
options SUN4M # sun4m - SS10, SS20, Classic, etc.
## System options specific to the sparc machine type
# Blink the power LED on some machines to indicate the system load.
#options BLINK
# customization of console and kernel output - see dev/wscons/wsdisplayvar.h
options WSDISPLAY_COMPAT_USL # wsconscfg VT handling
options WSDISPLAY_COMPAT_RAWKBD
options WSDISPLAY_CUSTOM_OUTPUT
options WS_DEFAULT_FG=WSCOL_BLACK
options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE
options WS_KERNEL_FG=WSCOL_GREEN
options WS_KERNEL_BG=WSCOL_LIGHT_WHITE
options WSDISPLAY_SCROLLSUPPORT
options FONT_GALLANT12x22 # the console font
#### System options that are the same for all ports
## Root device configuration: change the ?'s if you are going to use a
## nonstandard root partition (other than where the kernel is booted from)
## and/or nonstandard root type (not ffs or nfs). Normally this can be
## automagically determined at boot time.
config netbsd root on ? type ?
## System call tracing (see ktrace(1)).
options KTRACE
## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2))
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
#options SEMMNI=10 # number of semaphore identifiers
#options SEMMNS=60 # number of semaphores in system
#options SEMUME=10 # max number of undo entries per process
#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
## serial console break or keyboard reset, where the PROM would normally
## intercept. DDB_HISTORY_SIZE adds up/down arrow command history.
options DDB # kernel dynamic debugger
options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
## You may also use gdb, on another computer connected to this machine over
## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified;
## KGDB_DEV is a dev_t encoded device number of the serial port to use, where
## the minor device number encodes the PROM enumeration of the serial ports,
## i.e.:
## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd.
## (Note: ttyc and ttyd are available only on some sun4 models)
#options KGDB # support for kernel gdb
#options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb')
#options KGDB_DEVRATE=38400 # baud rate
## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
## such that gdb(1) can be used on a kernel coredump.
## Adds code to the kernel that does internal consistency checks, and will
## cause the kernel to panic if corruption of internal data structures
## is detected.
#options DIAGNOSTIC # extra kernel sanity checking
## Enable (possibly expensive) debugging code that may also display messages
## on the system console
#options DEBUG
#options LOCKDEBUG
#options SYSCALL_DEBUG
## Make SCSI error messages more verbose when explaining their meanings.
options SCSIVERBOSE
## `INSECURE' turns off the kernel security level (securelevel = 0 always).
## This allows writing to /dev/mem, loading kernel modules while multi-user,
## and other insecurities good only for development work. Do not use this
## option on a production machine.
#options INSECURE
## `FDSCRIPTS' allows non-readable but executable scripts by providing a
## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS',
## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
## opaque file mechanism. Perl calls this "secure setuid scripts."
#options FDSCRIPTS
#options SETUIDSCRIPTS
## Options for compatibility with previous releases foreign system binaries.
## In the cases of COMPAT_SUNOS, you may need to set up additional user-level
## utilities or system configuration files. See compat_sunos(8).
include "conf/compat_netbsd10.config"
options COMPAT_SUNOS # SunOS 4.x binary compatibility
## File systems. You probably need at least one of FFS or NFS.
file-system FFS # Berkeley Fast Filesystem
file-system NFS # Sun NFS-compatible filesystem client
file-system KERNFS # kernel data-structure filesystem
file-system NULLFS # NULL layered filesystem
file-system OVERLAY # overlay file system
file-system MFS # memory-based filesystem
file-system FDESC # user file descriptor filesystem
file-system UMAPFS # uid/gid remapping filesystem
#file-system LFS # Log-based filesystem (still experimental)
file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
file-system PROCFS # /proc
#file-system CD9660 # ISO 9660 + Rock Ridge file system
#file-system UNION # union file system
#file-system MSDOSFS # MS-DOS FAT filesystem(s).
#file-system CODA # Coda File System; also needs vcoda (below)
file-system PTYFS # /dev/pts/N support
#file-system TMPFS # Efficient memory file-system
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
## File system options.
#options FFS_EI # FFS Endian Independent support
options FFS_NO_SNAPSHOT # No FFS snapshot support
#options QUOTA # legacy UFS quotas
#options QUOTA2 # new, in-filesystem UFS quotas
options UFS_DIRHASH # UFS Large Directory Hashing
#options UFS_EXTATTR # Extended attribute support for UFS1
#options NFSSERVER # Network File System server
## Network protocol support. In most environments, INET is required.
options INET # IP (Internet Protocol) v4
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_DEBUG # debug for IP security
#options GATEWAY # packet forwarding ("router switch")
#options MROUTING # packet forwarding of multicast packets
#options PIM # Protocol Independent Multicast
#options NETATALK # AppleTalk (over Ethernet) protocol
options NTP # Network Time Protocol in-kernel support
#options PPS_SYNC # Add serial line synchronization for NTP
#options PPP_BSDCOMP # Add BSD compression to ppp device
#options PPP_DEFLATE # Add deflate (libz) compression to ppp device
#options PPP_FILTER # Add active filters for ppp (via bpf)
#### Main bus and CPU .. all systems.
mainbus0 at root
cpu0 at mainbus0
#### Bus types found on SPARC systems.
obio0 at mainbus0 # sun4 and sun4m
iommu0 at mainbus0 # sun4m
sbus0 at iommu0 # sun4m
#### Standard system devices -- all required for a given architecture
## Auxiliary system registers on sun4c and sun4m
auxreg0 at obio0 # sun4m
## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems.
clock0 at obio0 # sun4m
## Timer chip found on 4/300, sun4c, and sun4m systems.
timer0 at obio0 # sun4m
#### Serial port configuration
## NS16x50 serial chips and clones. Present on the
## Sun JavaStation-1 and Tadpole SPARCbook 3
com0 at obio0 # sun4m
#### Keyboard and mouse
pckbc0 at obio0
#kbd0 at pckbc0
#ms0 at pckbc0
#wskbd* at kbd? console ?
#wsmouse* at ms? mux 0
pckbd* at pckbc? # PC keyboard
pms* at pckbc? # PS/2 mouse for wsmouse
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
#### Disk controllers and disks
## A disk-like interface to files. Can be used to create floppy, CD,
## miniroot images, etc.
## SLIP and CSLIP interfaces, for IP over a serial line.
#pseudo-device sl
## PPP, the successor to SLIP. See pppd(8).
#pseudo-device ppp
## PPP over Ethernet (RFC 2516)
#pseudo-device pppoe
## Network "tunnel" device, allowing protocol stacks to run in the userland.
## This is used by the third-party user-mode "ppp" program, and others.
#pseudo-device tun
#pseudo-device tap # virtual Ethernet
## Generic L3 over IP tunnel
#pseudo-device gre # generic L3 over IP tunnel
## Berkeley Packet Filter, required to run RARPD. A generic C-language
## interface that allows selective examining of incoming packets.
pseudo-device bpfilter
#pseudo-device carp # Common Address Redundancy Protocol
#pseudo-device npf # NPF packet filter
## for IPv6
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith # IPv[46] tcp relay translation i/f
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4).
#pseudo-device vlan
#### Audio and video devices
## /dev/audio support (`audiocs' plus `audio')
##
audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231
audio0 at audiocs0
spkr* at audio? # PC speaker (synthesized)
## Sun "tcx" accelerated color framebuffer.
tcx0 at sbus? slot ? offset ?
wsdisplay0 at tcx0
#### Other device configuration
## Pseudo ttys, required for network logins and programs like screen.
pseudo-device pty # pseudo-terminals
## Random device, used to implement /dev/random (a source of random noise),
## and generate randomness for some kernel formulae.
# a pseudo device needed for Coda # also needs CODA (above)
#pseudo-device vcoda # coda minicache <-> venus comm.
pseudo-device clockctl # user control of clock subsystem
pseudo-device drvctl # user control of drive subsystem
pseudo-device ksyms # /dev/ksyms
pseudo-device putter # for puffs and pud
pseudo-device wsmux # mouse and keyboard multiplexor
pseudo-device wsfont
