# news68k GENERIC config file for low memory machines;
#
include "arch/news68k/conf/std.news68k"
#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "GENERIC_TINY-$Revision: 1.93 $"
makeoptions COPTS="-O2 -fno-reorder-blocks" # see share/mk/sys.mk
maxusers 4
options news1200 # news1200 support
options news1700 # news1[4567]00 support
options CPU_SINGLE # Will IOP be supported eventually?
#options FPU_EMULATE
# Standard system options
#options NTP # NTP phase/frequency locked loop
options KTRACE # system call tracing support
options SYSVMSG # System V message queues
options SYSVSEM # System V semaphores
options SYSVSHM # System V shared memory
options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Alternate buffer queue strategies for better responsiveness under high
# disk I/O load.
#options BUFQ_READPRIO
#options BUFQ_PRIOCSCAN
# Debugging options
#options DIAGNOSTIC # extra kernel sanity checking
#options DEBUG # extra kernel debugging support
#options DDB # kernel dynamic debugger
#options DDB_HISTORY_SIZE=100 # enable history editing in DDB
#options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic'
#options SCSIVERBOSE # Verbose SCSI errors
#options SCSIDEBUG # extra SCSI debugging support
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
include "conf/compat_netbsd12.config"
options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
#options COMPAT_SUNOS # binary compatibility with SunOS
#options COMPAT_LINUX # binary compatibllity with Linux/m68k
#options COMPAT_OSSAUDIO # binary compatibllity with Linux/m68k
# File systems
file-system FFS # Berkeley Fast Filesystem
#file-system LFS # log-structured file system
file-system NFS # Sun NFS-compatible filesystem client
file-system MFS # memory-based filesystem
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS FAT file system
file-system KERNFS # /kern
file-system PROCFS # /proc
file-system FDESC # /dev/fd/*
#file-system NULLFS # loopback file system
#file-system OVERLAY # overlay file system
#file-system UMAPFS # NULLFS + uid and gid remapping
#file-system UNION # union file system
#file-system CODA # Coda File System; also needs vcode (below)
file-system PTYFS # /dev/pts/N support
# File system options
#options FFS_EI # FFS Endian Independent support
#options FFS_NO_SNAPSHOT # No FFS snapshot support
#options QUOTA # legacy UFS quotas
#options QUOTA2 # new, in-filesystem UFS quotas
#options UFS_DIRHASH # UFS Large Directory Hashing
#options UFS_EXTATTR # Extended attribute support for UFS1
options WAPBL # File system journaling support
options NFSSERVER # Network File System server
# Networking options
options INET # Internet protocols
options INET6 # IPV6
#options IPSEC # IP security
#options IPSEC_DEBUG # debug for IP security
#options GATEWAY # IP packet forwarding
#options MROUTING # IP multicast routing
#options PIM # Protocol Independent Multicast
#options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
#options PPP_FILTER # Active filter support for PPP (requires bpf)
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# keyboard/mouse
kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700
kb0 at kbc0 # news1700
ms0 at kbc0 # news1700
kb0 at hb1 addr 0xe1240000 ipl 5 # news1200
ms0 at hb1 addr 0xe1280000 ipl 5 # news1200
wskbd* at kb?
wsmouse* at ms?
# onboard z8530 SCC
zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700
zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
# Frame buffer devices; not yet
#fb0 at hb0 addr 0xf0700000 # NWB225
#fb1 at hb0 addr 0xf0f00000 # NWB512
# onboard uPD72067 FDC; not yet
#fdc0 at hb0 addr 0xe0c80000 ipl 3
#fd* at fdc0
# onboard CXD1180 SCSI controller
#
# This driver has several flags which may be enabled using
# the "flags" directive. Valid flags are:
#
# 0x000ff Set (1<<target) to disable disconnect/reselect
# 0x0ff00 Set (1<<(target+8)) to disable parity checking
# 0x10000 Set this bit to disable DMA interrupts (poll)
# 0x20000 Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
#
si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0x0
scsibus* at si0