/*      $NetBSD: ki2cvar.h,v 1.5 2017/09/15 21:34:42 macallan Exp $     */
/*      Id: ki2c.c,v 1.7 2002/10/05 09:56:05 tsubai Exp */

/*-
* Copyright (c) 2001 Tsubai Masanari.  All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
*    derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#ifndef KI2CVAR_H
#define KI2CVAR_H

#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/autoconf.h>

#include <dev/i2c/i2cvar.h>

/* Keywest I2C Register offsets */
#define MODE    0
#define CONTROL 1
#define STATUS  2
#define ISR     3
#define IER     4
#define ADDR    5
#define SUBADDR 6
#define DATA    7

/* MODE */
#define I2C_SPEED       0x03    /* Speed mask */
#define  I2C_100kHz     0x00
#define  I2C_50kHz      0x01
#define  I2C_25kHz      0x02
#define I2C_MODE        0x0c    /* Mode mask */
#define  I2C_DUMBMODE   0x00    /*  Dumb mode */
#define  I2C_STDMODE    0x04    /*  Standard mode */
#define  I2C_STDSUBMODE 0x08    /*  Standard mode + sub address */
#define  I2C_COMBMODE   0x0c    /*  Combined mode */
#define I2C_PORT        0xf0    /* Port mask */

/* CONTROL */
#define I2C_CT_AAK      0x01    /* Send AAK */
#define I2C_CT_ADDR     0x02    /* Send address(es) */
#define I2C_CT_STOP     0x04    /* Send STOP */
#define I2C_CT_START    0x08    /* Send START */

/* STATUS */
#define I2C_ST_BUSY     0x01    /* Busy */
#define I2C_ST_LASTAAK  0x02    /* Last AAK */
#define I2C_ST_LASTRW   0x04    /* Last R/W */
#define I2C_ST_SDA      0x08    /* SDA */
#define I2C_ST_SCL      0x10    /* SCL */

/* ISR/IER */
#define I2C_INT_DATA    0x01    /* Data byte sent/received */
#define I2C_INT_ADDR    0x02    /* Address sent */
#define I2C_INT_STOP    0x04    /* STOP condition sent */
#define I2C_INT_START   0x08    /* START condition sent */

/* I2C flags */
#define I2C_BUSY        0x01
#define I2C_READING     0x02
#define I2C_ERROR       0x04

struct ki2c_softc {
       device_t sc_dev;
       bus_space_tag_t sc_tag;
       bus_space_handle_t sc_bh;
       int sc_regstep;

       struct i2c_controller sc_i2c;
       kmutex_t sc_buslock;

       int sc_flags;
       u_char *sc_data;
       int sc_resid;
};

struct ki2c_confargs {
       char            *ka_name;       /* device name */
       int             ka_node;
       i2c_tag_t       ka_tag;         /* our controller */
       i2c_addr_t      ka_addr;        /* address of device */
};

#endif