/* $NetBSD: if_sn_nubus.c,v 1.30 2021/02/20 09:36:30 rin Exp $ */
/*
* Copyright (C) 1997 Allen Briggs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Allen Briggs
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
if (bus_space_subregion(bst, bsh,
0x0, SONIC_NREGS * 4, &sc->sc_sh)) {
aprint_error(": failed to map register space.\n");
break;
}
if (bus_space_subregion(bst, bsh,
0x40000, ETHER_ADDR_LEN, &tmp_bsh)) {
aprint_error(": failed to map ROM space.\n");
break;
}
sn_get_enaddr(bst, tmp_bsh, 0, myaddr);
offset = 0;
success = 1;
break;
case SN_VENDOR_ASANTELC: /* Macintosh LC Ethernet Adapter */
sc->sc_dcr = DCR_BMS | DCR_PO1 | DCR_RFT1 | DCR_TFT0;
sc->sc_dcr2 = 0;
sc->sc_32bit = 0; /* 16 bit card */
if (bus_space_subregion(bst, bsh,
0x0, SONIC_NREGS * 4, &sc->sc_sh)) {
aprint_error(": failed to map register space.\n");
break;
}
if (bus_space_subregion(bst, bsh,
0x400000, ETHER_ADDR_LEN, &tmp_bsh)) {
aprint_error(": failed to map ROM space.\n");
break;
}
sn_get_enaddr(bst, tmp_bsh, 0, myaddr);
offset = 0;
success = 1;
break;
default:
/*
* You can't actually get this default, the snmatch
* will fail for unknown hardware. If you're adding support
* for a new card, the following defaults are a
* good starting point.
*/
sc->sc_dcr = DCR_SBUS | DCR_BMS | DCR_RFT1 | DCR_TFT0;
sc->sc_dcr2 = 0;
sc->sc_32bit = 1;
success = 0;
aprint_error(": unknown card: attachment incomplete.\n");
}
if (!success) {
bus_space_unmap(bst, bsh, NBMEMSIZE);
return;
}
/* Regs are addressed as words, big endian. */
for (i = 0; i < SONIC_NREGS; i++) {
sc->sc_regmap[i] = (bus_size_t)((i * 4) + offset);
}