# $NetBSD: gen_template.sh,v 1.4 2008/04/30 13:10:59 martin Exp $
#
# Copyright (c) 2001 The NetBSD Foundation, Inc.
# All rights reserved.
#
# This code is derived from software contributed to The NetBSD Foundation
# by UCHIYAMA Yasushi.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
# ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
# PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
# BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

#
# Generate application/static library dsp/vcp template.
#
TEMPLATE=$TYPE.tmpl
DEBUG_VER="Debug"
RELEASE_VER="Release"
if [ $TYPE != "application" ] ; then
   PROJECTTYPE="Static Library"
else
   PROJECTTYPE="Application"
fi

#
# Visual C++ version.
#
vc_ver=$1
case $vc_ver in
"vc5")
   echo "Generate template for Visual C++ 5 Windows CE Embeded ToolKit"
   ;;
"vc6")
   echo "Generate template for Visual C++ 6 Windows CE ToolKit"
   ;;
"evc3"|"evc4")
   echo "Generate template for Embeded Visual C++ 3/4"
   ;;
*)
   echo "Unsupported Visual C++ version."
   exit 1
esac

tmpl_base="tmpl.$vc_ver"
header_tmpl="$tmpl_base/header"
project_tmpl="$tmpl_base/project"

#
# Architecture types.
#
archs=""
i=1
n=`expr $#`
while [ $i -lt $n ]; do
   shift 1
   archs="$archs $1"
   i=`expr $i + 1`
done
echo "Supported architecture [$archs ]"

#
# DSP/VCP header.
#
cat $header_tmpl >> $TEMPLATE

#
# Configuration declare.
#
echo '!MESSAGE' >> $TEMPLATE
for arch in $archs
do
   ARCH_CFG="Win32 (WCE $arch)"
   CFG="%%% NAME %%% - $ARCH_CFG"
   echo "!MESSAGE \"$CFG $DEBUG_VER\" (\"$ARCH_CFG $PROJECTTYPE\")" >> $TEMPLATE
   echo "!MESSAGE \"$CFG $RELEASE_VER\" (\"$ARCH_CFG $PROJECTTYPE\")" >> $TEMPLATE
done
echo '!MESSAGE' >> $TEMPLATE

#
# Project define.
#
cat $project_tmpl >> $TEMPLATE

#
# Architecture dependent configuration define.
#
for arch in $archs
do
   ARCH_CFG="Win32 (WCE $arch)"
   CFG="%%% NAME %%% - $ARCH_CFG"
   echo "!IF  \"\$(CFG)\" == \"$CFG $DEBUG_VER\"" >> $TEMPLATE
   echo "# PROP BASE Output_Dir \"..\\compile\\$arch$DEBUG_VER\"" >> $TEMPLATE
   echo "# PROP BASE Intermediate_Dir \"..\\compile\\$arch$DEBUG_VER\"" >> $TEMPLATE
   echo "# PROP Output_Dir \"..\\compile\\$arch$DEBUG_VER\"" >> $TEMPLATE
   echo "# PROP Intermediate_Dir \"..\\compile\\$arch$DEBUG_VER\"" >> $TEMPLATE
   cat $tmpl_base/$TYPE.$arch$DEBUG_VER >> $TEMPLATE
   cat $tmpl_base/config.defadd >> $TEMPLATE
   if [ $TYPE = "application" ] ; then
       echo "# ADD LINK32 /libpath:\"..\\compile\\$arch$DEBUG_VER\"" >> $TEMPLATE
   fi
   echo "!ENDIF" >> $TEMPLATE
   echo "!IF  \"\$(CFG)\" == \"$CFG $RELEASE_VER\"" >> $TEMPLATE
   cat $tmpl_base/config.defprop >> $TEMPLATE
   echo "# PROP BASE Output_Dir \"..\\compile\\$arch$RELEASE_VER\"" >> $TEMPLATE
   echo "# PROP BASE Intermediate_Dir \"..\\compile\\$arch$RELEASE_VER\"" >> $TEMPLATE
   echo "# PROP Output_Dir \"..\\compile\\$arch$RELEASE_VER\"" >> $TEMPLATE
   echo "# PROP Intermediate_Dir \"..\\compile\\$arch$RELEASE_VER\"" >> $TEMPLATE
   cat $tmpl_base/$TYPE.$arch$RELEASE_VER >> $TEMPLATE
   cat $tmpl_base/config.defadd >> $TEMPLATE
   if [ $TYPE = "application" ] ; then
       echo "# ADD LINK32 /libpath:\"..\\compile\\$arch$RELEASE_VER\"" >> $TEMPLATE
   fi
   echo "!ENDIF" >> $TEMPLATE
done

#
# Target declare
#
echo >> $TEMPLATE
echo "# Begin Target" >> $TEMPLATE
for arch in $archs
do
   ARCH_CFG="Win32 (WCE $arch)"
   CFG="%%% NAME %%% - $ARCH_CFG"
   echo "# Name \"$CFG $DEBUG_VER\"" >> $TEMPLATE
   echo "# Name \"$CFG $RELEASE_VER\"" >> $TEMPLATE
done

#
# Source files
#
# (MI)
cat >> $TEMPLATE <<SRCS

# Begin Group "Source Files"
%%% SRCFILES %%%

SRCS
# (MD)
for arch in $archs
do
   echo "%%% SRCFILES_$arch %%%" >> $TEMPLATE
done
#
# Footer.
#
cat >> $TEMPLATE <<FOOTER

# End Group
# End Target
# End Project

FOOTER

#
# Generate MD source files property.
#
for arch in $archs
do
   ARCH_FILE="property.$arch"
   rm -f $ARCH_FILE
   for sub_arch in $archs
   do
       ARCH_CFG="Win32 (WCE $sub_arch)"
       CFG="%%% NAME %%% - $ARCH_CFG"
       CONDITION_DEBUG="!IF  \"\$(CFG)\" == \"$CFG $DEBUG_VER\""
       CONDITION_RELEASE="!IF  \"\$(CFG)\" == \"$CFG $RELEASE_VER\""
       if [ $sub_arch != $arch ] ; then
           echo $CONDITION_DEBUG >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Exclude_From_Build 1" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
           echo $CONDITION_RELEASE >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Exclude_From_Build 1" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
       fi
   done
#    mv $ARCH_FILE $ARCH_FILE.0
#    awk ' { printf "%s\r\n", $0 }' $ARCH_FILE.0 > $ARCH_FILE
#    rm -f $ARCH_FILE.0
done

#
# Generate MD assembler files property and custom build method.
#
for arch in $archs
do
   ARCH_FILE="asm_build.$arch.0"
   rm -f $ARCH_FILE
   for sub_arch in $archs
   do
       ARCH_CFG="Win32 (WCE $sub_arch)"
       CFG="%%% NAME %%% - $ARCH_CFG"
       CONDITION_DEBUG="!IF  \"\$(CFG)\" == \"$CFG $DEBUG_VER\""
       CONDITION_RELEASE="!IF  \"\$(CFG)\" == \"$CFG $RELEASE_VER\""
       if [ $sub_arch != $arch ] ; then
           echo $CONDITION_DEBUG >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Exclude_From_Build 1" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
           echo $CONDITION_RELEASE >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Exclude_From_Build 1" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
       else
           echo $CONDITION_DEBUG >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Ignore_Default_Tool 1" >> $ARCH_FILE
           echo "# Begin Custom Build" >> $ARCH_FILE
           echo "InputPath=%%% ASM_BASENAME %%%.asm" >> $ARCH_FILE
           echo "\"\$(OUTDIR)\\%%% ASM_BASENAME %%%.obj\" : \$(SOURCE) \"\$(INTDIR)\" \"\$(OUTDIR)\"" >> $ARCH_FILE
           echo "      %%% ASM %%% \$(InputPath) \$(OUTDIR)\\%%% ASM_BASENAME %%%.obj" >> $ARCH_FILE
           echo "# End Custom Build" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
           echo $CONDITION_RELEASE >> $ARCH_FILE >> $ARCH_FILE
           echo "# PROP Ignore_Default_Tool 1" >> $ARCH_FILE
           echo "# Begin Custom Build" >> $ARCH_FILE
           echo "InputPath=%%% ASM_BASENAME %%%.asm" >> $ARCH_FILE
           echo "\"\$(OUTDIR)\\%%% ASM_BASENAME %%%.obj\" : \$(SOURCE) \"\$(INTDIR)\" \"\$(OUTDIR)\"" >> $ARCH_FILE
           echo "      %%% ASM %%% \$(InputPath) \$(OUTDIR)\\%%% ASM_BASENAME %%%.obj" >> $ARCH_FILE
           echo "# End Custom Build" >> $ARCH_FILE
           echo "!ENDIF" >> $ARCH_FILE
       fi
   done
done

#
# set assembler.
#
if [ -f asm_build.ARM.0 ]; then
   sed 's/%%% ASM %%%/armasm.exe/' asm_build.ARM.0 > asm_build.ARM
   rm -f asm_build.ARM.0
fi
if [ -f asm_build.ARMV4.0 ]; then
   sed 's/%%% ASM %%%/armasm.exe/' asm_build.ARMV4.0 > asm_build.ARMV4
   rm -f asm_build.ARMV4.0
fi
if [ -f asm_build.SH.0 ]; then
   sed 's/%%% ASM %%%/asmsh.exe/' asm_build.SH.0 > asm_build.SH
   rm -f asm_build.SH.0
fi
if [ -f asm_build.SH3.0 ]; then
   sed 's/%%% ASM %%%/asmsh.exe/' asm_build.SH3.0 > asm_build.SH3
   rm -f asm_build.SH3.0
fi
if [ -f asm_build.SH4.0 ]; then
   sed 's/%%% ASM %%%/asmsh.exe/' asm_build.SH4.0 > asm_build.SH4
   rm -f asm_build.SH4.0
fi
if [ -f asm_build.MIPS.0 ]; then
   sed 's/%%% ASM %%%/mipsasm.exe/' asm_build.MIPS.0 > asm_build.MIPS
   rm -f asm_build.MIPS.0
fi

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.