/*      $NetBSD: apci.c,v 1.14 2023/04/21 22:44:27 tsutsui Exp $        */

/*-
* Copyright (c) 1997, 1999 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/

/*
* Copyright (c) 1988 University of Utah.
* Copyright (c) 1990, 1993
*      The Regents of the University of California.  All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
*    may be used to endorse or promote products derived from this software
*    without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*      @(#)dca.c       8.1 (Berkeley) 6/10/93
*/

#ifdef APCICONSOLE
#include <sys/param.h>
#include <dev/cons.h>

#include <lib/libsa/stand.h>

#include <hp300/dev/frodoreg.h>         /* for APCI offsets */
#include <hp300/dev/intioreg.h>         /* for frodo offsets */

#include <hp300/stand/common/apcireg.h> /* for register map */
#include <hp300/stand/common/dcareg.h>  /* for register bits */
#include <hp300/stand/common/consdefs.h>
#include <hp300/stand/common/samachdep.h>

struct apciregs *apcicnaddr = 0;

void
apciprobe(struct consdev *cp)
{
       volatile uint8_t *frodoregs;

       cp->cn_pri = CN_DEAD;

       /*
        * Only a 425e can have an APCI console.  On all other 4xx models,
        * the "first" serial port is mapped to the DCA at select code 9.
        */
       if (machineid != HP_425 || mmuid != MMUID_425_E)
               return;

       /*
        * Check the service switch. On the 425e, this is a physical
        * switch, unlike other frodo-based machines, so we can use it
        * as a serial vs internal video selector, since the PROM can not
        * be configured for serial console.
        */
       frodoregs = (volatile u_int8_t *)IIOV(INTIOBASE + FRODO_BASE);
       if (badaddr((char *)frodoregs) == 0 &&
           (frodoregs[FRODO_IISR] & FRODO_IISR_SERVICE) == 0)
               cp->cn_pri = CN_REMOTE;
       else
               cp->cn_pri = CN_NORMAL;

#ifdef FORCEAPCICONSOLE
       cp->cn_pri = CN_REMOTE;
#endif
       curcons_scode = -2;

       apcicnaddr =
           (void *)IIOV(INTIOBASE + FRODO_BASE + FRODO_APCI_OFFSET(1));
}

void
apciinit(struct consdev *cp)
{
       struct apciregs *apci = (struct apciregs *)apcicnaddr;

       /*
        * The only system on which this will happen is a 425e,
        * which does not currently have a framebuffer console
        * driver.  We use the ROM's output method to let the
        * operator know we're switching to the APCI.
        */
       userom = 1;
       printf("Switching to APCI console.\n");
       userom = 0;

       apci->ap_cfcr = CFCR_DLAB;
       apci->ap_data = APCIBRD(9600) & 0xff;
       apci->ap_ier  = (APCIBRD(9600) >> 8) & 0xff;
       apci->ap_cfcr = CFCR_8BITS;
       apci->ap_fifo =
           FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1;
       apci->ap_mcr = MCR_DTR | MCR_RTS;
}

#ifndef SMALL
int
apcigetchar(dev_t dev)
{
       struct apciregs *apci = apcicnaddr;
       short stat;
       int c;

       if (((stat = apci->ap_lsr) & LSR_RXRDY) == 0)
               return 0;
       c = apci->ap_data;
       return c;
}
#else
int
apcigetchar(dev_t dev)
{

       return 0;
}
#endif

void
apciputchar(dev_t dev, int c)
{
       struct apciregs *apci = apcicnaddr;
       int timo;
       short stat;

       /* wait a reasonable time for the transmitter to come ready */
       timo = 50000;
       while (((stat = apci->ap_lsr) & LSR_TXRDY) == 0 && --timo)
               ;
       apci->ap_data = c;
       /* wait for this transmission to complete */
       timo = 1000000;
       while (((stat = apci->ap_lsr) & LSR_TXRDY) == 0 && --timo)
               ;
}
#endif