/*      $NetBSD: obsled.c,v 1.12 2024/09/07 06:17:38 andvar Exp $       */

/*
* Copyright (c) 2004 Shigeyuki Fukushima.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
*    copyright notice, this list of conditions and the following
*    disclaimer in the documentation and/or other materials provided
*    with the distribution.
* 3. The name of the author may not be used to endorse or promote
*    products derived from this software without specific prior
*    written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: obsled.c,v 1.12 2024/09/07 06:17:38 andvar Exp $");

#include <sys/param.h>
#include <sys/device.h>
#include <sys/queue.h>
#include <sys/sysctl.h>
#include <sys/systm.h>

#include <machine/obs266.h>

#include <powerpc/ibm4xx/dev/gpiovar.h>

struct obsled_softc {
       device_t sc_dev;
       gpio_tag_t sc_tag;
       int sc_addr;
       int sc_led_state;       /* LED status (ON=1/OFF=0) */
       int sc_led_state_mib;
};

static void     obsled_attach(device_t, device_t, void *);
static int      obsled_match(device_t, cfdata_t, void *);
static int      obsled_sysctl_verify(SYSCTLFN_PROTO);
static void     obsled_set_state(struct obsled_softc *);

CFATTACH_DECL_NEW(obsled, sizeof(struct obsled_softc),
       obsled_match, obsled_attach, NULL, NULL);

static int
obsled_match(device_t parent, cfdata_t cf, void *aux)
{
       struct gpio_attach_args *ga = aux;

       /* XXX: support only OpenBlockS266 LED */
       if (ga->ga_addr == OBS266_GPIO_LED1)
               return (1);
       else if (ga->ga_addr == OBS266_GPIO_LED2)
               return (1);
       else if (ga->ga_addr == OBS266_GPIO_LED4)
               return (1);

       return (0);
}

static void
obsled_attach(device_t parent, device_t self, void *aux)
{
       struct obsled_softc *sc = device_private(self);
       struct gpio_attach_args *ga = aux;
       struct sysctlnode *node;
       int err, node_mib;
       char led_name[5];
       /* int led = (1 << device_unit(sc->sc_dev)); */

       snprintf(led_name, sizeof(led_name),
               "led%d", (1 << device_unit(sc->sc_dev)) & 0x7);
       aprint_naive(": OpenBlockS %s\n", led_name);
       aprint_normal(": OpenBlockS %s\n", led_name);

       sc->sc_dev = self;
       sc->sc_tag = ga->ga_tag;
       sc->sc_addr = ga->ga_addr;
       sc->sc_led_state = 0;

       obs266_led_set(OBS266_LED_OFF);

       /* add sysctl interface */
       err = sysctl_createv(NULL, 0,
                       NULL, (const struct sysctlnode **)&node,
                       0, CTLTYPE_NODE,
                       "obsled",
                       NULL,
                       NULL, 0, NULL, 0,
                       CTL_HW, CTL_CREATE, CTL_EOL);
       if (err  != 0)
               return;
       node_mib = node->sysctl_num;
       err = sysctl_createv(NULL, 0,
                       NULL, (const struct sysctlnode **)&node,
                       CTLFLAG_READWRITE, CTLTYPE_INT,
                       led_name,
                       SYSCTL_DESCR("OpenBlockS LED state (0=off, 1=on)"),
                       obsled_sysctl_verify, 0, (void *)sc, 0,
                       CTL_HW, node_mib, CTL_CREATE, CTL_EOL);
       if (err  != 0)
               return;

       sc->sc_led_state_mib = node->sysctl_num;
#if 0
       {
               gpio_tag_t tag = sc->sc_tag;
               (*(tag)->io_or_write)((tag)->cookie, sc->sc_addr, 0);
       }
#endif
}

static int
obsled_sysctl_verify(SYSCTLFN_ARGS)
{
       struct obsled_softc *sc = rnode->sysctl_data;
       struct sysctlnode node;
       int err, state;

       node = *rnode;
       state = sc->sc_led_state;
       node.sysctl_data = &state;

       err = sysctl_lookup(SYSCTLFN_CALL(&node));
       if (err != 0 || newp == NULL)
               return err;

       if (node.sysctl_num == sc->sc_led_state_mib) {
               if (state < 0 || state > 1)
                       return EINVAL;
               sc->sc_led_state = state;
               obsled_set_state(sc);
       }

       return 0;
}

static void
obsled_set_state(struct obsled_softc *sc)
{
       gpio_tag_t tag = sc->sc_tag;

       (*(tag)->io_or_write)((tag)->cookie,
                               sc->sc_addr,
                               (~(sc->sc_led_state) & 1));
       /* GPIO LED input ON=0/OFF=1 */
}

/*
* Setting LED interface for inside kernel.
* Argument `led' is 3-bit LED state (led=0-7/ON=1/OFF=0).
*/
void
obs266_led_set(int led)
{
       device_t dv;
       deviter_t di;

       /*
        * Searching "obsled" devices from device tree.
        * Do you have a better idea?
        */
       for (dv = deviter_first(&di, DEVITER_F_ROOT_FIRST); dv != NULL;
            dv = deviter_next(&di)) {
               if (device_is_a(dv, "obsles")) {
                       struct obsled_softc *sc = device_private(dv);
                       sc->sc_led_state =
                           (led & (1 << device_unit(dv))) >> device_unit(dv);
                       obsled_set_state(sc);
               }
       }
       deviter_release(&di);
}