/*      $Id: mmnet_machdep.c,v 1.6 2020/04/18 11:00:40 skrll Exp $      */
/*      $NetBSD: mmnet_machdep.c,v 1.6 2020/04/18 11:00:40 skrll Exp $  */

/*
* Copyright (c) 2007 Embedtronics Oy
* Based on tsarm_machdep.c
*
* Copyright (c) 2001, 2002, 2003 Wasabi Systems, Inc.
* All rights reserved.
*
* Based on code written by Jason R. Thorpe and Steve C. Woodford for
* Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
*    must display the following acknowledgement:
*      This product includes software developed for the NetBSD Project by
*      Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
*    or promote products derived from this software without specific prior
*    written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/

/*
* Copyright (c) 1997,1998 Mark Brinicombe.
* Copyright (c) 1997,1998 Causality Limited.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
*    must display the following acknowledgement:
*      This product includes software developed by Mark Brinicombe
*      for the NetBSD Project.
* 4. The name of the company nor the name of the author may be used to
*    endorse or promote products derived from this software without specific
*    prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Machine dependant functions for kernel setup for Iyonix.
*/
/* Adaptation for Propox MMnet by Aymeric Vincent is in the public domain */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mmnet_machdep.c,v 1.6 2020/04/18 11:00:40 skrll Exp $");

#include "opt_ddb.h"
#include "opt_kgdb.h"

#include <sys/param.h>
#include <sys/bus.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/exec.h>
#include <sys/proc.h>
#include <sys/msgbuf.h>
#include <sys/reboot.h>
#include <sys/termios.h>
#include <sys/ksyms.h>

#include <uvm/uvm_extern.h>

#include <dev/cons.h>

#include <machine/db_machdep.h>
#include <ddb/db_sym.h>
#include <ddb/db_extern.h>

#define DRAM_BLOCKS     1
#include <machine/bootconfig.h>
#include <machine/cpu.h>
#include <machine/frame.h>
#include <arm/undefined.h>

#include <arm/arm32/machdep.h>

#include <arm/at91/at91reg.h>
#include <arm/at91/at91var.h>

#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>

#include <machine/autoconf.h>

#include "isa.h"

#include <arm/at91/at91sam9260reg.h>
#include <arm/at91/at91sam9260busvar.h>

#include "ksyms.h"

#include <arm/at91/at91busvar.h>
#include <arm/at91/at91pdcreg.h>
#include <arm/at91/at91dbgureg.h>
#include <arm/at91/at91reg.h>
#include <arm/at91/at91streg.h>

/* boot configuration: */
BootConfig bootconfig;          /* Boot config storage */
char *boot_args = NULL;
char *boot_file = NULL;

/* hmmm */
static struct arm32_dma_range mmnet_dma_ranges[4];
static struct at91bus_machdep mmnetbus;
static at91bus_tag_t old_at91bus_tag;

/* Prototypes */
static void mmnet_device_register(device_t dev, void *aux);
static void mmnetbus_init(struct at91bus_clocks *);
static void mmnetbus_peripheral_clock(int pid, int enable);
static uint32_t mmnetbus_gpio_mask(int pid);


/*
* void cpu_reboot(int howto, char *bootstr)
*
* Reboots the system
*
* Deal with any syncing, unmounting, dumping and shutdown hooks,
* then reset the CPU.
*/
void
cpu_reboot(int howto, char *bootstr)
{

       /*
        * If we are still cold then hit the air brakes
        * and crash to earth fast
        */
       if (cold) {
               doshutdownhooks();
               pmf_system_shutdown(boothowto);
               printf("\r\n");
               printf("The operating system has halted.\r\n");
               printf("Please press any key to reboot.\r\n");
               cngetc();
               printf("\r\nrebooting...\r\n");
               goto reset;
       }

       /* Disable console buffering */

       /*
        * If RB_NOSYNC was not specified sync the discs.
        * Note: Unless cold is set to 1 here, syslogd will die during the
        * unmount.  It looks like syslogd is getting woken up only to find
        * that it cannot page part of the binary in as the filesystem has
        * been unmounted.
        */
       if (!(howto & RB_NOSYNC))
               bootsync();

       /* Say NO to interrupts */
       splhigh();

       /* Do a dump if requested. */
       if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP)
               dumpsys();

       /* Run any shutdown hooks */
       doshutdownhooks();

       pmf_system_shutdown(boothowto);

       /* Make sure IRQ's are disabled */
       IRQdisable;

       if (howto & RB_HALT) {
               printf("\r\n");
               printf("The operating system has halted.\r\n");
               printf("Please press any key to reboot.\r\n");
               cngetc();
       }

       printf("\r\nrebooting...\r\n");
reset:
       /*
        * Make really really sure that all interrupts are disabled,
        * and poke the Internal Bus and Peripheral Bus reset lines.
        */
       (void) disable_interrupts(I32_bit|F32_bit);
       STREG(ST_WDMR)  = ST_WDMR_EXTEN | ST_WDMR_RSTEN | 1;
       STREG(ST_CR)    = ST_CR_WDRST;
       for (;;);
}

/*
* vaddr_t initarm(...)
*
* Initial entry point on startup. This gets called before main() is
* entered.
* It should be responsible for setting up everything that must be
* in place when main is called.
* This includes
*   Taking a copy of the boot configuration structure.
*   Initialising the physical console so characters can be printed.
*   Setting up page tables for the kernel
*   Initialising interrupt controllers to a sane default state
*/
vaddr_t
initarm(void *arg)
{
       vaddr_t sp;
       /*
        * basic AT91 initialization:
        */
       if (at91bus_init())
               panic("%s: at91bus_init() failed", __FUNCTION__);

       if (AT91_CHIP_ID() == AT91SAM9260_CHIP_ID) {
               memcpy(&mmnetbus, at91bus_tag, sizeof(mmnetbus));
               mmnetbus.init = mmnetbus_init;
               mmnetbus.peripheral_clock = mmnetbus_peripheral_clock;
               mmnetbus.gpio_mask = mmnetbus_gpio_mask;
               old_at91bus_tag = at91bus_tag;
               at91bus_tag = &mmnetbus;
       }

       /* Fake bootconfig structure for the benefit of pmap.c */
       /* XXX must make the memory description h/w independent */
       bootconfig.dramblocks = 1;
       bootconfig.dram[0].address = 0x20000000UL;
       bootconfig.dram[0].pages =   0x04000000UL / PAGE_SIZE;
       sp = at91bus_setup(&bootconfig);

       if (AT91_CHIP_ID() != AT91SAM9260_CHIP_ID)
               panic("%s: processor is not AT91SAM9260", __FUNCTION__);

       /* we've a specific device_register routine */
       evbarm_device_register = mmnet_device_register;

       /* We return the new stack pointer address */
       return sp;
}


bus_dma_tag_t
at91_bus_dma_init(struct arm32_bus_dma_tag *dma_tag_template)
{
       int i;
       struct arm32_bus_dma_tag *dmat;

       for (i = 0; i < bootconfig.dramblocks; i++) {
               mmnet_dma_ranges[i].dr_sysbase = bootconfig.dram[i].address;
               mmnet_dma_ranges[i].dr_busbase = bootconfig.dram[i].address;
               mmnet_dma_ranges[i].dr_len = bootconfig.dram[i].pages *
                       PAGE_SIZE;
       }

       dmat = dma_tag_template;

       dmat->_ranges = mmnet_dma_ranges;
       dmat->_nranges = bootconfig.dramblocks;

       return dmat;
}

void mmnetbus_init(struct at91bus_clocks *clocks)
{
       (*old_at91bus_tag->init)(clocks);
}

uint32_t mmnetbus_gpio_mask(int pid)
{
       switch (pid) {
       case PID_PIOA:  return ~0x00000300U;
       case PID_PIOB:  return ~0x0000783FU;
       case PID_PIOC:  return ~0x00000000U;
       default:        return ~0x00000000U;
       }
}

void mmnetbus_peripheral_clock(int pid, int enable)
{
       switch (pid) {
       case PID_TWI:
               if (enable) {
                       PIOA_WRITE(PIO_ASR, 0x06000000);
                       PIOA_WRITE(PIO_PDR, 0x06000000);
                       PIOA_WRITE(PIO_MDER, 0x06000000);
               }
               break;

       case PID_SPI0:
               if (enable) {
                       PIOA_WRITE(PIO_ASR, 0x0000000f);
                       PIOA_WRITE(PIO_PDR, 0x0000000f);
               }
               break;

       case PID_SPI1:
               if (enable) {
                       PIOB_WRITE(PIO_ASR, 0x0000000f);
                       PIOB_WRITE(PIO_PDR, 0x0000000f);
               }
               break;
       }
       (*old_at91bus_tag->peripheral_clock)(pid, enable);
}


static void mmnet_device_register(device_t dev, void *aux)
{
#if 0
       if (device_is_a(dev, "at91semac")) {
               // propagate mac address from u-boot
       }
#endif
}

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.