/* $NetBSD: ixdp425reg.h,v 1.7 2009/10/21 14:15:51 rmind Exp $ */
/*
* Copyright (c) 2003
* Ichiro FUKUHARA <
[email protected]>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _IXDP425REG_H_
#define _IXDP425REG_H_
#include "opt_evbarm_boardtype.h"
#define ixdp425 1
#define zao425 2
/*
* Interrupt & GPIO
*/
#if EVBARM_BOARDTYPE == ixdp425
/* GPIOs */
#define GPIO_PCI_CLK 14
#define GPIO_PCI_RESET 13
#define GPIO_PCI_INTA 11
#define GPIO_PCI_INTB 10
#define GPIO_PCI_INTC 9
#define GPIO_PCI_INTD 8
#define GPIO_I2C_SDA 7
#define GPIO_I2C_SCL 6
/* Interrupt */
#define PCI_INT_A IXP425_INT_GPIO_11
#define PCI_INT_B IXP425_INT_GPIO_10
#define PCI_INT_C IXP425_INT_GPIO_9
#define PCI_INT_D IXP425_INT_GPIO_8
#endif /* EVBARM_BOARDTYPE == ixdp425 */
#if EVBARM_BOARDTYPE == zao425 /* conf/ZAO425 */
/* GPIOs */
#define GPIO_PCI_CLK 14
#define GPIO_PCI_RESET 13
#define GPIO_PCI_INTA 11
#define GPIO_PCI_INTB 10
#define GPIO_PCI_INTC 9
#define GPIO_PCI_INTD 8
#define GPIO_I2C_SDA 7
#define GPIO_I2C_SCL 6
/* Interrupt */
#define MPCI_GPIO0 IXP425_INT_GPIO_12
#define PCI_INT_A IXP425_INT_GPIO_11
#define PCI_INT_B IXP425_INT_GPIO_10
#define PCI_INT_C IXP425_INT_GPIO_9
#define PCI_INT_D IXP425_INT_GPIO_8
#define MPCI_GPIO3 IXP425_INT_GPIO_5
#define HSS0_INT IXP425_INT_GPIO_4
#define HSS0_SCLK IXP425_INT_GPIO_3
#define HSS0_SDI IXP425_INT_GPIO_2
#define HSS0_SDO IXP425_INT_GPIO_1
#define HSS0_CS IXP425_INT_GPIO_0
#endif /* EVBARM_BOARDTYPE == zao425 */
#endif /* _IXDP425REG_H_ */
