/*
* Copyright (c) 2002, 2005  Genetec corp.  All rights reserved.
* Written by Hiroyuki Bessho for Genetec corp.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
*    notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
*    notice, this list of conditions and the following disclaimer in the
*    documentation and/or other materials provided with the distribution.
* 3. The name of Genetec corp. may not be used to endorse
*    or promote products derived from this software without specific prior
*    written permission.
*
* THIS SOFTWARE IS PROVIDED BY GENETEC CORP. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORP.
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/

#ifndef _EVBARM_G42XXEB_REG_H
#define _EVBARM_G42XXEB_REG_H

#include <arm/xscale/pxa2x0reg.h>

/* g42xxeb on-board IOs */
#define G42XXEB_PLDREG_BASE     PXA2X0_CS3_START /* Phisical address */
#define G42XXEB_PLDREG_SIZE     0x00000100

#define G42XXEB_AX88796_PBASE (PXA2X0_CS3_START+0x02000000)


/*
* Logical mapping for onboard/integrated peripherals
* that are used while bootstrapping.
*/
#define G42XXEB_IO_AREA_VBASE  0xfd000000
#define G42XXEB_PLDREG_VBASE    0xfd000000
#define G42XXEB_INTCTL_VBASE    0xfd100000
#define G42XXEB_CLKMAN_VBASE    0xfd200000
#define G42XXEB_GPIO_VBASE      0xfd300000
#define G42XXEB_FFUART_VBASE    0xfd400000
#define G42XXEB_BTUART_VBASE    0xfd500000

/*
* Onboard register address
* (offset from G42XXEB_OBIO_PBASE)
*/
#define G42XXEB_INTSTS1 0x0a
#define G42XXEB_INTSTS2 0x0c
#define G42XXEB_INTCNTL         0x0e
#define G42XXEB_INTCNTH         0x10
#define G42XXEB_INTMASK 0x14

#define  G42XXEB_INT_MMCSD     0
#define  G42XXEB_INT_SDIO      1
#define  G42XXEB_INT_EXT0      2
#define  G42XXEB_INT_EXT1      3
#define  G42XXEB_INT_USB       4
#define  G42XXEB_INT_ETH       5
#define  G42XXEB_INT_CODEC     6
#define  G42XXEB_INT_EXT2      7
#define  G42XXEB_INT_KEY       8
#define  G42XXEB_INT_EXT3      9

#define  G42XXEB_N_INTS         10

/* interrupt type */
#define G42XXEB_INT_LEVEL_LOW           0
#define G42XXEB_INT_LEVEL_HIGH          1
#define G42XXEB_INT_EDGE_FALLING        4
#define G42XXEB_INT_EDGE_RISING 5
#define G42XXEB_INT_EDGE_BOTH   6


#define G42XXEB_DIPSW           0x16
#define G42XXEB_LED             0x18

#define G42XXEB_RST             0x1a
#define  RST_ASIX88796          (1<<0)
#define  RST_EXT(n)             (1<<((n)+1))
#define G42XXEB_EXTCTRL 0x1c
#define G42XXEB_OPTBRDID       0x20
#define G42XXEB_PLDVER         0x22


#define G42XXEB_LCDCTL         0x28
#define  LCDCTL_BL_ON   (1<<7)
#define  LCDCTL_DPSH    (1<<1)
#define  LCDCTL_DPSV    (1<<0)
#define  LCDCTL_BL_PWM_SHIFT  8         /* Backlight blightness */
#define  LCDCTL_BL_PWN  (0xff<<LCDCTL_BL_PWM_SHIFT)

#define G42XXEB_KEYSCAN 0x2a
#define  KEYSCAN_SCAN_OUT       0x1f00
#define  KEYSCAN_SENSE_IN       0x0f
#define G42XXEB_WP              0x2c // SD/MMC write protect status

#define ioreg_read(a)  (*(volatile unsigned *)(a))
#define ioreg_write(a,v)  (*(volatile unsigned *)(a)=(v))

#define ioreg16_read(a)  (*(volatile uint16_t *)(a))
#define ioreg16_write(a,v)  (*(volatile uint16_t *)(a)=(v))

#define ioreg8_read(a)  (*(volatile uint8_t *)(a))
#define ioreg8_write(a,v)  (*(volatile uint8_t *)(a)=(v))

#define pldreg16_read(off)      ioreg16_read(G42XXEB_PLDREG_VBASE+(off))
#define pldreg16_write(off,v)   ioreg16_write(G42XXEB_PLDREG_VBASE+(off),v)
#define pldreg8_read(off)       ioreg8_read(G42XXEB_PLDREG_VBASE+(off))
#define pldreg8_write(off,v)    ioreg8_write(G42XXEB_PLDREG_VBASE+(off),v)

#endif /* _EVBARM_G42XXEB_REG_H */