include "conf/compat_netbsd14.config"
options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
# Shared memory options
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
# Device options
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
#options MEMORY_DISK_IS_ROOT # use memory disk as root
# Console options. The default console is speed is 115200 baud.
#options CONSPEED=9600 # Console speed
# Miscellaneous kernel options
options KTRACE # system call tracing, a la ktrace(1)
options IRQSTATS # manage IRQ statistics
#options SCSIVERBOSE # Verbose SCSI errors
options PCIVERBOSE # Verbose PCI descriptions
options MIIVERBOSE # Verbose MII autoconfuration messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options DDB_KEYCODE=0x40
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Development and Debugging options
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options UVMHIST # kernhist for uvm/pmap subsystems
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#makeoptions DEBUG="-g" # compile full symbol table
makeoptions COPY_SYMTAB=1
config netbsd root on ? type ?
config netbsd-wm0 root on wm0 type nfs
config netbsd-wd0 root on wd0 type ffs
# The main bus device
mainbus0 at root
# The boot CPU
cpu0 at mainbus?
# On-board device support
obio* at mainbus?
com0 at obio? addr 0xfe800000 xint 1 # on-board TI 16C550 UART
# Default setting of J7 is open, which means that the interrupt is not
# connected
wdc0 at obio? addr 0xfe8f0000 width 16 # on-board CF reader
#wdc0 at obio? addr 0xfe8f0000 width 16 xint 1 # on-board CF reader
# i80321 I/O Processor peripheral support
iopxs* at mainbus?
iopaau* at iopxs? # Application Accelerator Unit
iopiic* at iopxs? # I2C Controller Unit(s)
iic0 at iopiic?
iic1 at iopiic?
iopwdog* at iopxs? # Watchdog timer
pci0 at iopxs? bus ? # PCI/PCI-X support
# IIC devices
# Temperature sensors
lmtemp0 at iic0 addr 0x48 # LM75 temperature sensor
lmtemp1 at iic0 addr 0x49 # LM75 temperature sensor
# PCI-PCI bridges
ppb* at pci? dev ? function ?
pci* at ppb? bus ?
#
# Storage devices
#
pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
artsata* at pci? dev ? function ? # Intel i31244 SATA controller
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
pdcide* at pci? dev ? function ? # Promise IDE controllers
pdcsata* at pci? dev ? function ? # Promise SATA150 controllers
satalink* at pci? dev ? function ? # SiI SATALink controllers
atabus* at ata? channel ?
wd* at atabus? drive ? flags 0x0000
#
# Networking devices
#
# PCI network devices
fxp* at pci? dev ? function ? # Intel i8255x 10/100 Ethernet
wm* at pci? dev ? function ? # Intel i82544 Gig-E
# MII/PHY support
inphy* at mii? phy ? # Intel i82555 10/100 PHYs
makphy* at mii? phy ? # Marvell 88E1000 PHYs
ukphy* at mii? phy ? # Generic IEEE 802.3u PHYs
# Pseudo-Devices
# disk/mass storage pseudo-devices
#pseudo-device md # memory disk device (ramdisk)
pseudo-device vnd # disk-like interface to files
#pseudo-device fss # file system snapshot device
#pseudo-device putter # for puffs and pud
