include "conf/compat_netbsd50.config"
options COMPAT_NETBSD32 # allow running arm (e.g. non-earm) binaries
# Shared memory options
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SYSVSHM # System V-like memory sharing
# Device options
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
#options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
#options MEMORY_DISK_IS_ROOT # use memory disk as root
# Console options. The default console is speed is 115200 baud.
options CONSPEED=115200 # Console speed
# Miscellaneous kernel options
options KTRACE # system call tracing, a la ktrace(1)
options IRQSTATS # manage IRQ statistics
#options SCSIVERBOSE # Verbose SCSI errors
#options PCIVERBOSE # Verbose PCI descriptions
#options MIIVERBOSE # Verbose MII autoconfuration messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options DDB_KEYCODE=0x40
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
# Development and Debugging options
options DIAGNOSTIC # internal consistency checks
#options DEBUG
#options UVMHIST # kernhist for uvm/pmap subsystems
#options VERBOSE_INIT_ARM # verbose bootstraping messages
options DDB # in-kernel debugger
options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#makeoptions DEBUG="-g" # compile full symbol table
makeoptions COPY_SYMTAB=1
config netbsd root on ? type ?
config netbsd-wm0 root on wm0 type nfs
config netbsd-wd0 root on wd0a type ffs
config netbsd-sd0 root on sd0a type ffs
# The main bus device
mainbus0 at root
# The boot CPU
cpu0 at mainbus?
# On-board device support
obio* at mainbus?
# Console UART.
# Note: "xint 4" is actually the HPI# pin
com0 at obio? addr 0xfe800000 xint 4
# i80321 I/O Processor peripheral support
iopxs* at mainbus?
iopaau* at iopxs? # Application Accelerator Unit
iopiic* at iopxs? # I2C Controller Unit(s)
iic0 at iopiic?
iic1 at iopiic?
iopwdog* at iopxs? # Watchdog timer
pci0 at iopxs? bus ? # PCI/PCI-X support
# Serial ATA: i31244
artsata* at pci? dev ? function ? # Intel i31244 SATA controller
atabus* at ata?
# ATA Disks
wd* at atabus? drive ? flags 0x0000
# SCSI: Symbios Logic 53c1010
#
# Wire down the Target/Host instances. Disable the target controller for
# now as we don't currently support SCSI target mode.
siop0 at pci0 dev 2 function 1 # Host controller
#siop1 at pci0 dev 2 function 0 # Target controller
scsibus* at scsi?
# SCSI Devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI Scanners
uk* at scsibus? target ? lun ? # SCSI unknown
#
# Networking devices
#
# PCI network devices
wm* at pci? dev ? function ? # Intel i82546EB Gig-E
# MII/PHY support
makphy* at mii? phy ? # Marvell 88E1000 PHYs
# Pseudo-Devices
# disk/mass storage pseudo-devices
pseudo-device ccd # concatenated/striped disk devices
#pseudo-device cgd # cryptographic disk devices
pseudo-device raid # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options RF_INCLUDE_EVENODD=1
#options RF_INCLUDE_RAID5_RS=1
#options RF_INCLUDE_PARITYLOGGING=1
#options RF_INCLUDE_CHAINDECLUSTER=1
#options RF_INCLUDE_INTERDECLUSTER=1
#options RF_INCLUDE_PARITY_DECLUSTERING=1
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
#pseudo-device fss # file system snapshot device
#pseudo-device putter # for puffs and pud
#pseudo-device md # memory disk device (ramdisk)
pseudo-device vnd # disk-like interface to files
options VND_COMPRESSION # compressed vnd(4)
