/* $NetBSD: brh_start.S,v 1.3 2014/01/13 18:26:34 matt Exp $ */
/*
* Copyright (c) 2002 Wasabi Systems, Inc.
* All rights reserved.
*
* Written by Jason R. Thorpe for Wasabi Systems, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed for the NetBSD Project by
* Wasabi Systems, Inc.
* 4. The name of Wasabi Systems, Inc. may not be used to endorse
* or promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <machine/asm.h>
#include <arm/armreg.h>
#include "assym.h"
#include <arm/xscale/beccreg.h>
#include <evbarm/adi_brh/brhreg.h>
RCSID("$NetBSD: brh_start.S,v 1.3 2014/01/13 18:26:34 matt Exp $")
.section .start,"ax",%progbits
.global _C_LABEL(brh_start)
_C_LABEL(brh_start):
/*
* Get a pointer to the LED (physical address).
*/
mov ip, #(BRH_LED_BASE)
/*
* We will go ahead and disable the MMU here so that we don't
* have to worry about flushing caches, etc.
*
* Note that we may not currently be running VA==PA, which means
* we'll need to leap to the next insn after disabing the MMU.
*/
adr r8, .Lunmapped
bic r8, r8, #0xff000000 /* clear upper 8 bits */
orr r8, r8, #0xc0000000 /* OR in physical base address */
mrc p15, 0, r2, c1, c0, 0
bic r2, r2, #CPU_CONTROL_MMU_ENABLE
mcr p15, 0, r2, c1, c0, 0
nop
nop
nop
mov pc, r8 /* Heave-ho! */
Lunmapped:
/*
* We want to construct a memory map that maps us
* VA==PA (SDRAM at 0xc0000000) (which also happens
* to be where the kernel address space starts).
* We create these mappings uncached and unbuffered
* to be safe.
*
* We also map various devices at their expected locations,
* because we will need to talk to them during bootstrap.
*
* We just use section mappings for all of this to make it easy.
*
* We will put the L1 table to do all this at 0xc0004000.
*/
/*
* Step 1: Map the entire address space VA==PA.
*/
ldr r0, .Ltable /* r0 = &l1table */
mov r3, #(L1_S_AP_KRW)
orr r3, r3, #(L1_TYPE_S)
mov r2, #0x100000 /* advance by 1MB */
mov r1, #0x1000 /* 4096MB */
1:
str r3, [r0], #0x04
add r3, r3, r2
subs r1, r1, #1
bgt 1b
#if 0
/*
* Step 2: Map the PCI configuration space (this is needed
* to access some of the core logic registers).
*/
ldr r0, .Ltable /* r0 = &l1table */
mov r3, #(L1_S_AP_KRW)
orr r3, r3, #(L1_TYPE_S)
orr r3, r3, #(BECC_PCI_CONF_BASE)
add r0, r0, #((BRH_PCI_CONF_VBASE >> L1_S_SHIFT) * 4)
mov r1, #(BRH_PCI_CONF_VSIZE >> L1_S_SHIFT)
1:
str r3, [r0], #0x04
add r3, r3, r2
subs r1, r1, #1
bgt 1b
#endif
/*
* Step 3: Map the BECC, UARTs, and LED display.
*/
ldr r0, .Ltable /* r0 = &l1table */
mov r3, #(L1_S_AP_KRW)
orr r3, r3, #(L1_TYPE_S)
orr r3, r3, #(BECC_REG_BASE)
ldr r2, .Lbrh_becc_vbase
str r3, [r0, r2]
bic r3, r3, #(BECC_REG_BASE)
orr r3, r3, #(BRH_UART1_BASE)
ldr r2, .Lbrh_uart1_vbase
str r3, [r0, r2]
bic r3, r3, #(BRH_UART1_BASE)
orr r3, r3, #(BRH_UART2_BASE)
ldr r2, .Lbrh_uart2_vbase
str r3, [r0, r2]
bic r3, r3, #(BRH_UART2_BASE)
orr r3, r3, #(BRH_LED_BASE)
ldr r2, .Lbrh_led_vbase
str r3, [r0, r2]
bic r3, r3, #(BRH_LED_BASE)
/* OK! Page table is set up. Give it to the CPU. */
ldr r0, .Ltable
mcr p15, 0, r0, c2, c0, 0
/* Flush the old TLBs, just in case. */
mcr p15, 0, r0, c8, c7, 0
/* Set the Domain Access register. Very important! */
mov r0, #1
mcr p15, 0, r0, c3, c0, 0
/* Get ready to jump to the "real" kernel entry point... */
ldr r0, .Lstart
/* OK, let's enable the MMU. */
mrc p15, 0, r2, c1, c0, 0
orr r2, r2, #CPU_CONTROL_MMU_ENABLE
mcr p15, 0, r2, c1, c0, 0
nop
nop
nop
/* CPWAIT sequence to make sure the MMU is on... */
mrc p15, 0, r2, c2, c0, 0 /* arbitrary read of CP15 */
mov r2, r2 /* force it to complete */
mov pc, r0 /* leap to kernel entry point! */
Lbrh_becc_vbase:
.word ((BRH_BECC_VBASE >> L1_S_SHIFT) * 4)
Lbrh_uart1_vbase:
.word ((BRH_UART1_VBASE >> L1_S_SHIFT) * 4)
Lbrh_uart2_vbase:
.word ((BRH_UART2_VBASE >> L1_S_SHIFT) * 4)
Lbrh_led_vbase:
.word ((BRH_LED_VBASE >> L1_S_SHIFT) * 4)
Ltable:
.word 0xc0004000
Lstart:
.word start
