#options INCLUDE_CONFIG_FILE # embed config file in kernel binary
maxusers 8
options RTC_OFFSET=0
#
# mainboards to support (in addition to Amiga)
#
options DRACO
options BB060STUPIDROM # You need this, if you have a non-DraCo
# MC68060 with an OS ROM up to (at least)
# V40 (OS3.1) and want to boot with the
# bootblock.
# You do not need this if you have a DraCo,
# have no 68060 or NEVER use the bootblock
#
# processors this kernel should support
#
options M68060 # support for 060
options M060SP # MC68060 software support (Required for 060)
options M68040 # support for 040
options FPSP # MC68040 floating point support
options M68030 # support for 030
options M68020 # support for 020/851
options FPU_EMULATE # FPU emulation
#
# Networking options
#
options INET # IP networking support (Required)
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
# Filesystems
file-system FFS # Berkeley fast file system
file-system MFS # Memory based filesystem
file-system NFS # Network File System client side code
file-system ADOSFS # AmigaDOS file system
file-system CD9660 # ISO 9660 + Rock Ridge filesystem
file-system MSDOSFS # MS-DOS filesystem
file-system KERNFS # kernel data-structure filesystem
file-system PTYFS # /dev/pts/N support
options FFS_NO_SNAPSHOT # No FFS snapshot support
#
# Support for various kernel options
#
options KTRACE # system call tracing support
#options INSECURE # disable kernel security levels
options SCSIVERBOSE # human readable SCSI error messages
options NTP # NTP phase/frequency locked loop
options USERCONF # userconf(4) support
options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
#
# Amiga specific options
#
#options LIMITMEM=24 # Do not use more than LIMITMEM MB of the
# first bank of RAM. (default: unlimited)
# ATTENTION: There is NO WARRANTY AT ALL that the sync will be complete
# before the 10 secondinterval ends, or that KBDRESET does work at all.
#options KBDRESET # sync on Ctrl-Amiga-Amiga
# These options improve performance with the built-in serial port
# on slower Amigas. Try the larger buffers first then lev6_defer.
#options SERIBUF_SIZE=4096
#options SEROBUF_SIZE=32
#options LEV6_DEFER # defers l6 to l4 (below serial l5)
options RETINACONSOLE # enable code to allow retina to be console
options ULOWELLCONSOLE # enable code to allow a2410 to be console
options CL5426CONSOLE # Cirrus console
options CV64CONSOLE # CyberVision console
options TSENGCONSOLE # Tseng console
options CV3DCONSOLE # CyberVision 64/3D console
options GRF_ECS # Enhanced Chip Set
options GRF_NTSC # NTSC
options GRF_PAL # PAL
options GRF_A2024 # Support for the A2024
options GRF_AGA # AGA Chip Set
options GRF_AGA_VGA # AGA VGAONLY timing
options GRF_SUPER72 # AGA Super-72
#options KFONT_8X11 # 8x11 font
# select a font for the console according to the character set and keymap
# you want to use
options KFONT_CONS_ISO8859_1
#options KFONT_CONS_ISO8859_2
# This is how you would tell the kernel the A2410 oscillator frequencies:
# The used frequencies are the defaults, and do not need option setting
#options ULOWELL_OSC1=36000000
#options ULOWELL_OSC2=66667000
# This is how you specify the blitting speed, higher values may speed up blits
# a little bit. If you raise this value too much some trash may appear.
# the commented version is the default.
#options RH_MEMCLK=61000000
# this option enables the 64 bit sprite which does not work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
#options RH_64BIT_SPRITE
# enables fast scroll code appears to now work on 040 systems.
#options RETINA_SPEED_HACK
# enables the Hardwarecursor which does not work on some systems.
#options RH_HARDWARECURSOR
p5bus0 at zbus0 # Phase5 CSPPC/BPPC internal bus
grfcc0 at mainbus0 # custom chips
grfrt0 at zbus0 # retina II
grfrh0 at zbus0 # retina III
grfcl* at zbus0 # Picasso II/Piccolo/Spectrum
grful0 at zbus0 # A2410
grfcv0 at zbus0 # CyberVision 64
grfet* at zbus0 # Tseng (oMniBus, Domino, Merlin)
grfcv3d0 at zbus0 # CyberVision 64/3D
grf0 at grfcc0
grf1 at grfrt0
grf2 at grfrh0
grf3 at grfcl?
grf4 at grful0
grf5 at grfcv0
grf6 at grfet?
grf7 at grfcv3d0
ite0 at grf0 # terminal emulators for grfs
ite1 at grf1 # terminal emulators for grfs
ite2 at grf2 # terminal emulators for grfs
ite3 at grf3 # terminal emulators for grfs
ite4 at grf4 # terminal emulators for grfs
ite5 at grf5 # terminal emulators for grfs
ite6 at grf6 # terminal emulators for grfs
ite7 at grf7 # terminal emulators for grfs
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
hyper* at zbus? # zbus HyperCom3 + HyperCom4
#hyper* at mainbus0 # not yet: HyperCom1 + HyperCom3
com* at hyper? port ? # Hypercom3/4 serial ports
#lpt* at hyper? port ? # not yet: Hypercom3 parallel port
#
# Amiga Mainboard devices (sans graphics and keyboard)
#
ser0 at mainbus0 # Amiga onboard serial
par0 at mainbus0 # Amiga onboard parallel
ms* at mainbus0 # Amiga mice
fdc0 at mainbus0 # Amiga FDC
fd* at fdc0 unit ? # floppy disks on the later
a34kbbc0 at mainbus0 # A3000/A4000 battery backed clock
a2kbbc0 at mainbus0 # A2000 battery backed clock
aucc* at mainbus0 # Amiga CC audio
audio* at aucc?
spkr* at audio? # PC speaker (synthesized)
#
# DraCo Mainboard devices (sans keyboard)
#
drbbc0 at mainbus0 # DraCo battery backed clock
drsupio0 at mainbus0 # DraCo superio chip
com* at drsupio? port ? # DraCo serial
lpt0 at drsupio? port ? # DraCo parallel
# Ethernet cards:
le* at zbus0 # A2065, Ameristar, Ariadne
ne* at zbus0 # AriadneII
ed* at zbus0 # Hydra, ASDG LanRover
es* at zbus0 # CEI A4066 EthernetPLUS
qn* at zbus0 # Quicknet
# Arcnet
bah* at zbus0 # C=/Ameristar A2060 / 560
# Greater Valley Product Bus
gvpbus* at zbus0
# scsi stuff, all possible
gtsc0 at gvpbus? # GVP series II scsi
scsibus* at gtsc0
ahsc0 at mainbus0 # A3000 scsi
scsibus* at ahsc0
atzsc0 at zbus0 # A2091 scsi
scsibus* at atzsc0
wstsc0 at zbus0 # Wordsync II scsi
scsibus* at wstsc0
ivsc0 at zbus0 # IVS scsi
scsibus* at ivsc0
mlhsc0 at zbus0 # Hacker scsi
scsibus* at mlhsc0
otgsc0 at zbus0 # 12 gauge scsi
scsibus* at otgsc0
zssc0 at zbus0 # Zeus scsi
scsibus* at zssc0
mgnsc0 at zbus0 # Magnum scsi
scsibus* at mgnsc0
wesc0 at zbus0 # Warp Engine scsi
scsibus* at wesc0
bppcsc0 at p5bus0 # BlizzardPPC 603e+ scsi
scsibus* at bppcsc0
afsc0 at zbus0 # A4091 scsi
scsibus* at afsc0
aftsc0 at mainbus0 # A4000T scsi
scsibus* at aftsc0
flsc0 at zbus0 # FastlaneZ3 scsi
scsibus* at flsc0
bzsc0 at zbus0 # Blizzard 1230 I,II scsi
scsibus* at bzsc0
bzivsc0 at zbus0 # Blizzard 12x0 IV scsi
scsibus* at bzivsc0
bztzsc0 at zbus0 # Blizzard 2060 scsi
scsibus* at bztzsc0
cbsc0 at zbus0 # CyberSCSI I
scsibus* at cbsc0
cbiisc0 at zbus0 # CyberSCSI II
scsibus* at cbiisc0
cbiiisc0 at p5bus0 # Cyberstorm mk.III/Cyberstorm PPC SCSI
scsibus* at cbiiisc0
empsc0 at zbus0 # Emplant scsi
scsibus* at empsc0
wdc0 at mainbus0 # A4000 & A1200 IDE bus
atabus* at wdc? channel ? # ATA bus
wd* at atabus? drive ? # + drives
atapibus* at atabus? # ATAPI bus
cd* at atapibus? drive ? # ATAPI CD-ROM drives
sd* at atapibus? drive ? # ATAPI disk drives
drsc0 at mainbus0 # DraCo scsi
scsibus* at drsc0
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cds
#options RND_COM # use "com" randomness as well (BROKEN)
config netbsd root on ? type ?
# Enable the hooks used for initializing the root memory-disk.
options MEMORY_DISK_HOOKS
options MEMORY_DISK_IS_ROOT # force root on memory disk
options MEMORY_DISK_SERVER=0 # no userspace memory disk support
options MEMORY_DISK_ROOT_SIZE=2048 # size of memory disk, in blocks
options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode
