/*
* Copyright (c) 1981, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* pnoutrefresh --
* Add the contents of "pad" to the virtual window.
*/
int
pnoutrefresh(WINDOW *pad, int pbegy, int pbegx, int sbegy, int sbegx,
int smaxy, int smaxx)
{
int pmaxy, pmaxx;
/* SUS says if these are negative, they should be treated as zero */
if (pbegy < 0)
pbegy = 0;
if (pbegx < 0)
pbegx = 0;
if (sbegy < 0)
sbegy = 0;
if (sbegx < 0)
sbegx = 0;
/* Calculate rectangle on pad - used by _wnoutrefresh */
pmaxy = pbegy + smaxy - sbegy + 1;
pmaxx = pbegx + smaxx - sbegx + 1;
/* Check rectangle fits in pad */
if (pmaxy > pad->maxy - pad->begy)
pmaxy = pad->maxy - pad->begy;
if (pmaxx > pad->maxx - pad->begx)
pmaxx = pad->maxx - pad->begx;
/*
* _wnoutrefresh --
* Does the grunt work for wnoutrefresh to the given screen.
* Copies the part of the window given by the rectangle
* (begy, begx) to (maxy, maxx) at screen position (wbegy, wbegx).
*/
static int
_wnoutrefresh(WINDOW *win, int begy, int begx, int wbegy, int wbegx,
int maxy, int maxx)
{
SCREEN *screen = win->screen;
short sy, wy, wx, y_off, x_off, mx, dy_off, dx_off, endy;
int newy, newx;
#ifdef HAVE_WCHAR
int i, tx;
wchar_t ch;
#endif
__LINE *wlp, *vlp, *dwlp;
WINDOW *sub_win, *orig, *swin, *dwin;
/*
* Recurse through any sub-windows, mark as dirty lines on the parent
* window that are dirty on the sub-window and clear the dirty flag on
* the sub-window.
*/
if (dwin->orig == 0) {
orig = dwin;
for (sub_win = dwin->nextp; sub_win != orig;
sub_win = sub_win->nextp) {
if (sub_win->flags & __ISDERWIN)
continue;
__CTRACE(__CTRACE_REFRESH,
"wnout_refresh: win %p, sub_win %p\n",
orig, sub_win);
for (sy = 0; sy < sub_win->maxy; sy++) {
if (sub_win->alines[sy]->flags & __ISDIRTY) {
orig->alines[sy + sub_win->begy - orig->begy]->flags
|= __ISDIRTY;
sub_win->alines[sy]->flags
&= ~__ISDIRTY;
}
if (sub_win->alines[sy]->flags & __ISFORCED) {
orig->alines[sy + sub_win->begy - orig->begy]->flags
|= __ISFORCED;
sub_win->alines[sy]->flags
&= ~__ISFORCED;
}
}
}
}
/* Check that cursor position on "win" is valid for "__virtscr" */
newy = wbegy + dwin->cury - begy;
newx = wbegx + dwin->curx - begx;
if (begy <= dwin->cury && dwin->cury < maxy
&& 0 <= newy && newy < screen->__virtscr->maxy)
screen->__virtscr->cury = newy;
if (begx <= dwin->curx && dwin->curx < maxx
&& 0 <= newx && newx < screen->__virtscr->maxx)
screen->__virtscr->curx = newx;
/* Copy the window flags from "win" to "__virtscr" */
if (dwin->flags & __CLEAROK) {
if (dwin->flags & __FULLWIN)
screen->__virtscr->flags |= __CLEAROK;
dwin->flags &= ~__CLEAROK;
}
screen->__virtscr->flags &= ~__LEAVEOK;
screen->__virtscr->flags |= dwin->flags;
/* Set flags on "__virtscr" and unset on "win". */
if (wlp->flags & __ISPASTEOL)
vlp->flags |= __ISPASTEOL;
else
vlp->flags &= ~__ISPASTEOL;
if (wlp->flags & __ISDIRTY)
vlp->flags |= __ISDIRTY;
if (wlp->flags & __ISFORCED)
vlp->flags |= __ISFORCED;
__CTRACE(__CTRACE_REFRESH,
"__virtscr: firstch = %d, lastch = %d\n",
*vlp->firstchp, *vlp->lastchp);
/*
* Unset change pointers only if a window and we
* are not forcing a redraw. A pad can be displayed
* again without any of the contents changing.
*/
if (!((win->flags & __ISPAD)) ||
((wlp->flags & __ISFORCED) == __ISFORCED))
{
/* Set change pointers on "win". */
if (*wlp->firstchp >= win->ch_off)
*wlp->firstchp = maxx + win->ch_off;
if (*wlp->lastchp < maxx + win->ch_off)
*wlp->lastchp = win->ch_off;
if ((*wlp->lastchp < *wlp->firstchp) ||
(*wlp->firstchp >= maxx + win->ch_off) ||
(*wlp->lastchp <= win->ch_off)) {
__CTRACE(__CTRACE_REFRESH,
"_wnoutrefresh: "
"line %d notdirty\n", wy);
wlp->flags &= ~(__ISDIRTY | __ISFORCED);
}
}
}
}
return OK;
}
/*
* wrefresh --
* Make the current screen look like "win" over the area covered by
* win.
*/
int
wrefresh(WINDOW *win)
{
int retval;
int pbegx, pbegy;
/*
* prefresh --
* Make the current screen look like "pad" over the area coverd by
* the specified area of pad.
*/
int
prefresh(WINDOW *pad, int pbegy, int pbegx, int sbegy, int sbegx,
int smaxy, int smaxx)
{
int retval;
__CTRACE(__CTRACE_REFRESH, "prefresh: pad %p, flags 0x%08x\n",
pad, pad->flags);
if (__predict_false(pad == NULL))
return ERR;
/* Retain values in case pechochar() is called. */
pad->pbegy = pbegy;
pad->pbegx = pbegx;
pad->sbegy = sbegy;
pad->sbegx = sbegx;
pad->smaxy = smaxy;
pad->smaxx = smaxx;
/*
* doupdate --
* Make the current screen look like the virtual window "__virtscr".
*/
int
doupdate(void)
{
WINDOW *win;
__LINE *wlp, *vlp;
short wy;
int dnum, was_cleared, changed;
/* Check if we need to restart ... */
if (_cursesi_screen->endwin)
__restartwin();
if (_cursesi_screen->curwin)
win = curscr;
else
win = _cursesi_screen->__virtscr;
if (!_cursesi_screen->curwin) {
for (wy = 0; wy < win->maxy; wy++) {
wlp = win->alines[wy];
if (wlp->flags & __ISDIRTY)
wlp->hash = __hash_line(wlp->line, win->maxx);
}
}
was_cleared = 0;
if ((win->flags & __CLEAROK) || (curscr->flags & __CLEAROK) ||
_cursesi_screen->curwin)
{
if (curscr->wattr & __COLOR)
__unsetattr(0);
tputs(clear_screen, 0, __cputchar);
_cursesi_screen->ly = 0;
_cursesi_screen->lx = 0;
if (!_cursesi_screen->curwin) {
curscr->flags &= ~__CLEAROK;
curscr->cury = 0;
curscr->curx = 0;
werase(curscr);
}
__touchwin(win, 0);
win->flags &= ~__CLEAROK;
/* note we cleared for later */
was_cleared = 1;
}
if (!cursor_address) {
if (win->curx != 0)
__cputchar('\n');
if (!_cursesi_screen->curwin)
werase(curscr);
}
__CTRACE(__CTRACE_REFRESH, "doupdate: (%p): curwin = %d\n", win,
_cursesi_screen->curwin);
__CTRACE(__CTRACE_REFRESH, "doupdate: \tfirstch\tlastch\n");
if (!_cursesi_screen->curwin) {
/*
* Invoke quickch() only if more than a quarter of the lines
* in the window are dirty.
*/
for (wy = 0, dnum = 0; wy < win->maxy; wy++)
if (win->alines[wy]->flags & __ISDIRTY)
dnum++;
if (!__noqch && dnum > (int) win->maxy / 4)
quickch();
}
changed = 0;
for (wy = 0; wy < win->maxy; wy++) {
wlp = win->alines[wy];
vlp = _cursesi_screen->__virtscr->alines[win->begy + wy];
/* XXX: remove this */
__CTRACE(__CTRACE_REFRESH,
"doupdate: wy %d\tf: %d\tl:%d\tflags %x\n",
wy, *wlp->firstchp, *wlp->lastchp, wlp->flags);
if (!_cursesi_screen->curwin)
curscr->alines[wy]->hash = wlp->hash;
if (wlp->flags & __ISDIRTY || wlp->flags & __ISFORCED) {
__CTRACE(__CTRACE_REFRESH,
"doupdate: [ISDIRTY]wy:%d\tf:%d\tl:%d\n", wy,
*wlp->firstchp, *wlp->lastchp);
/*
* We have just cleared so don't force an update
* otherwise we spray needless blanks to a cleared
* screen. That is, unless, we are using color,
* in this case we need to force the background
* color to default.
*/
if ((was_cleared == 1) && (__using_color == 0))
win->alines[wy]->flags &= ~ 0L;
/*if ((was_cleared == 1) && (__using_color == 0))
win->alines[wy]->flags &= ~__ISFORCED;*/
if (makech(wy) == ERR)
return ERR;
else {
if (*wlp->firstchp >= 0)
*wlp->firstchp = win->maxx;
if (*wlp->lastchp < win->maxx)
*wlp->lastchp = win->ch_off;
if (*wlp->lastchp < *wlp->firstchp) {
__CTRACE(__CTRACE_REFRESH,
"doupdate: line %d notdirty\n", wy);
wlp->flags &= ~(__ISDIRTY | __ISFORCED);
}
/* Check if we have input after
* changing N lines. */
if (_cursesi_screen->checkfd != -1 &&
++changed == CHECK_INTERVAL)
{
struct pollfd fds[1];
/* If we have input, abort. */
fds[0].fd = _cursesi_screen->checkfd;
fds[0].events = POLLIN;
if (poll(fds, 1, 0) > 0)
goto cleanup;
changed = 0;
}
}
}
/*
* virtscr is now synced for the line, unset the change
* pointers.
*/
if (*vlp->firstchp >= 0)
*vlp->firstchp = _cursesi_screen->__virtscr->maxx;
if (*vlp->lastchp <= _cursesi_screen->__virtscr->maxx)
*vlp->lastchp = 0;
/*
* Unset attributes as appropriate. Unset first
* so that the relevant attributes can be reset
* (because 'me' unsets 'mb', 'md', 'mh', 'mk',
* 'mp' and 'mr'). Check to see if we also turn off
* standout, attributes and colour.
*/
if (off & __TERMATTR && exit_attribute_mode != NULL) {
tputs(exit_attribute_mode, 0, __cputchar);
curscr->wattr &= __mask_me;
off &= __mask_me;
}
/*
* Exit underscore mode if appropriate.
* Check to see if we also turn off standout,
* attributes and colour.
*/
if (off & __UNDERSCORE && exit_underline_mode != NULL) {
tputs(exit_underline_mode, 0, __cputchar);
curscr->wattr &= __mask_ue;
off &= __mask_ue;
}
/*
* Exit standout mode as appropriate.
* Check to see if we also turn off underscore,
* attributes and colour.
* XXX
* Should use uc if so/se not available.
*/
if (off & __STANDOUT && exit_standout_mode != NULL) {
tputs(exit_standout_mode, 0, __cputchar);
curscr->wattr &= __mask_se;
off &= __mask_se;
}
/*
* Enter standout mode if appropriate.
*/
if (on & __STANDOUT &&
enter_standout_mode != NULL &&
exit_standout_mode != NULL)
{
tputs(enter_standout_mode, 0, __cputchar);
curscr->wattr |= __STANDOUT;
}
/*
* Enter underscore mode if appropriate.
* XXX
* Should use uc if us/ue not available.
*/
if (on & __UNDERSCORE &&
enter_underline_mode != NULL &&
exit_underline_mode != NULL)
{
tputs(enter_underline_mode, 0, __cputchar);
curscr->wattr |= __UNDERSCORE;
}
/*
* Set other attributes as appropriate.
*/
if (exit_attribute_mode != NULL) {
if (on & __BLINK && enter_blink_mode != NULL)
{
tputs(enter_blink_mode, 0, __cputchar);
curscr->wattr |= __BLINK;
}
if (on & __BOLD && enter_bold_mode != NULL)
{
tputs(enter_bold_mode, 0, __cputchar);
curscr->wattr |= __BOLD;
}
if (on & __DIM && enter_dim_mode != NULL)
{
tputs(enter_dim_mode, 0, __cputchar);
curscr->wattr |= __DIM;
}
if (on & __BLANK && enter_secure_mode != NULL)
{
tputs(enter_secure_mode, 0, __cputchar);
curscr->wattr |= __BLANK;
}
if (on & __PROTECT && enter_protected_mode != NULL)
{
tputs(enter_protected_mode, 0, __cputchar);
curscr->wattr |= __PROTECT;
}
if (on & __REVERSE && enter_reverse_mode != NULL)
{
tputs(enter_reverse_mode, 0, __cputchar);
curscr->wattr |= __REVERSE;
}
#ifdef HAVE_WCHAR
if (on & WA_TOP && enter_top_hl_mode != NULL)
{
tputs(enter_top_hl_mode, 0, __cputchar);
curscr->wattr |= WA_TOP;
}
if (on & WA_LOW && enter_low_hl_mode != NULL)
{
tputs(enter_low_hl_mode, 0, __cputchar);
curscr->wattr |= WA_LOW;
}
if (on & WA_LEFT && enter_left_hl_mode != NULL)
{
tputs(enter_left_hl_mode, 0, __cputchar);
curscr->wattr |= WA_LEFT;
}
if (on & WA_RIGHT && enter_right_hl_mode != NULL)
{
tputs(enter_right_hl_mode, 0, __cputchar);
curscr->wattr |= WA_RIGHT;
}
if (on & WA_HORIZONTAL && enter_horizontal_hl_mode != NULL)
{
tputs(enter_horizontal_hl_mode, 0, __cputchar);
curscr->wattr |= WA_HORIZONTAL;
}
if (on & WA_VERTICAL && enter_vertical_hl_mode != NULL)
{
tputs(enter_vertical_hl_mode, 0, __cputchar);
curscr->wattr |= WA_VERTICAL;
}
#endif /* HAVE_WCHAR */
}
/* Enter/exit altcharset mode as appropriate. */
if (on & __ALTCHARSET && enter_alt_charset_mode != NULL &&
exit_alt_charset_mode != NULL) {
tputs(enter_alt_charset_mode, 0, __cputchar);
curscr->wattr |= __ALTCHARSET;
}
}
/* Is the cursor still on the end of the last line? */
if (wy > 0 && curscr->alines[wy - 1]->flags & __ISPASTEOL) {
domvcur(win, _cursesi_screen->ly, _cursesi_screen->lx,
_cursesi_screen->ly + 1, 0);
_cursesi_screen->ly++;
_cursesi_screen->lx = 0;
}
wlp = win->alines[wy];
wx = *win->alines[wy]->firstchp;
if (wx < 0)
wx = 0;
else
if (wx >= win->maxx)
return (OK);
lch = *win->alines[wy]->lastchp;
if (lch < 0)
return OK;
else
if (lch >= (int) win->maxx)
lch = win->maxx - 1;
if (_cursesi_screen->curwin) {
csp = ␣
__CTRACE(__CTRACE_REFRESH, "makech: csp is blank\n");
} else {
csp = &curscr->alines[wy]->line[wx];
__CTRACE(__CTRACE_REFRESH,
"makech: csp is on curscr:(%d,%d)\n", wy, wx);
}
while (win->alines[wy]->line[wx].cflags & CA_CONTINUATION) {
wx--;
if (wx <= 0) {
wx = 0;
break;
}
}
nsp = fsp = &win->alines[wy]->line[wx];
#ifdef DEBUG
if (_cursesi_screen->curwin)
__CTRACE(__CTRACE_REFRESH,
"makech: nsp is at curscr:(%d,%d)\n", wy, wx);
else
__CTRACE(__CTRACE_REFRESH,
"makech: nsp is at __virtscr:(%d,%d)\n", wy, wx);
#endif /* DEBUG */
/*
* Work out if we can use a clear to end of line. If we are
* using color then we can only erase the line if the terminal
* can erase to the background color.
*/
if (clr_eol && !_cursesi_screen->curwin && (!(__using_color)
|| (__using_color && back_color_erase))) {
nlsp = win->maxx - 1;
cp = &win->alines[wy]->line[win->maxx - 1];
#ifdef HAVE_WCHAR
while ((_cursesi_celleq(cp, &blank) == 1) &&
#else
while (cp->ch == blank.ch &&
#endif /* HAVE_WCHAR */
((cp->attr & attr_mask) == battr)) {
#ifdef HAVE_WCHAR
nlsp -= cp->wcols;
cp -= cp->wcols;
#else
nlsp--;
cp--;
#endif /* HAVE_WCHAR */
/*
* work out how to clear the line. If:
* - clear len is greater than clear_to_eol len
* - background char == ' '
* - we are not at EOL
* - using color and term can erase to
* background color
* - if we are at the bottom of the window
* (to prevent a scroll)
* then emit the ce string.
*/
if (((wy == win->maxy - 1) ||
((mlsp - wx) > strlen(ce))) &&
((__using_color && back_color_erase) ||
(! __using_color))) {
if (wlp->line[wx].attr & win->screen->nca) {
__unsetattr(0);
} else if (__using_color &&
((__do_color_init == 1) ||
((lspc & __COLOR) !=
(curscr->wattr & __COLOR)))) {
__set_color(curscr, lspc &
__COLOR);
}
tputs(ce, 0, __cputchar);
_cursesi_screen->lx = wx + win->begx;
csp = &curscr->alines[wy]->line[wx + win->begx];
wx = wx + win->begx;
while (wx++ <= (curscr->maxx - 1)) {
csp->attr = blank.attr;
csp->ch = blank.ch;
csp->cflags = CA_BACKGROUND;
#ifdef HAVE_WCHAR
if (_cursesi_copy_nsp(blank.nsp, csp) == ERR)
return ERR;
csp->wcols = blank.wcols;
csp += blank.wcols;
#else
csp++;
#endif /* HAVE_WCHAR */
assert(csp != &blank);
}
return OK;
}
}
#ifdef HAVE_WCHAR
chw = nsp->wcols;
if (chw < 0)
chw = 0; /* match putch() */
#else
chw = 1;
#endif /* HAVE_WCHAR */
owx = wx;
if (wx + chw >= (win->maxx) &&
wy == win->maxy - 1 && !_cursesi_screen->curwin)
{
if (win->flags & __ENDLINE)
__unsetattr(1);
if (!(win->flags & __SCROLLWIN)) {
int e;
__CTRACE(__CTRACE_REFRESH,
"makech: 2: wx = %d, lx = %d\n",
wx, _cursesi_screen->lx);
}
if (_cursesi_screen->lx == wx) /* If no change. */
break;
/*
* We need to work out if the cursor has been put in the
* middle of a wide character so check if curx is between
* where we were and where we are and we are on the right
* line. If so, move the cursor now.
*/
if ((wy == win->cury) && (wx > win->curx) &&
(owx < win->curx)) {
_cursesi_screen->lx = win->curx;
domvcur(win, _cursesi_screen->ly, wx,
_cursesi_screen->ly, _cursesi_screen->lx);
} else
_cursesi_screen->lx = wx;
/*
* Quickch() attempts to detect a pattern in the change of the window
* in order to optimize the change, e.g., scroll n lines as opposed to
* repainting the screen line by line.
*/
__LINE *clp, *tmp1, *tmp2;
int bsize, curs, curw, starts, startw, i, j;
int n, target, cur_period, bot, top, sc_region;
unsigned int blank_hash, found;
attr_t bcolor;
#ifdef __GNUC__
curs = curw = starts = startw = 0; /* XXX gcc -Wuninitialized */
#endif
/*
* Find how many lines from the top of the screen are unchanged.
*/
for (top = 0; top < __virtscr->maxy; top++) {
if (__virtscr->alines[top]->flags & __ISDIRTY &&
(__virtscr->alines[top]->hash != curscr->alines[top]->hash ||
!lineeq(__virtscr->alines[top]->line,
curscr->alines[top]->line,
(size_t) __virtscr->maxx))) {
break;
} else
__virtscr->alines[top]->flags &= ~__ISDIRTY;
}
/*
* Find how many lines from bottom of screen are unchanged.
*/
for (bot = __virtscr->maxy - 1; bot >= 0; bot--) {
if (__virtscr->alines[bot]->flags & __ISDIRTY &&
(__virtscr->alines[bot]->hash != curscr->alines[bot]->hash ||
!lineeq(__virtscr->alines[bot]->line,
curscr->alines[bot]->line,
(size_t) __virtscr->maxx))) {
break;
} else
__virtscr->alines[bot]->flags &= ~__ISDIRTY;
}
/*
* Work round an xterm bug where inserting lines causes all the
* inserted lines to be covered with the background colour we
* set on the first line (even if we unset it for subsequent
* lines).
*/
bcolor = __virtscr->alines[min(top,
__virtscr->maxy - 1)]->line[0].attr & __COLOR;
for (i = top + 1, j = 0; i < bot; i++) {
if ((__virtscr->alines[i]->line[0].attr & __COLOR) != bcolor) {
bcolor = __virtscr->alines[i]->line[__virtscr->maxx].
attr & __COLOR;
j = i - top;
} else
break;
}
top += j;
#ifdef NO_JERKINESS
/*
* If we have a bottom unchanged region return. Scrolling the
* bottom region up and then back down causes a screen jitter.
* This will increase the number of characters sent to the screen
* but it looks better.
*/
if (bot < __virtscr->maxy - 1)
return;
#endif /* NO_JERKINESS */
/*
* Search for the largest block of text not changed.
* Invariants of the loop:
* - Startw is the index of the beginning of the examined block in
* __virtscr.
* - Starts is the index of the beginning of the examined block in
* curscr.
* - Curw is the index of one past the end of the exmined block in
* __virtscr.
* - Curs is the index of one past the end of the exmined block in
* curscr.
* - bsize is the current size of the examined block.
*/
found = 0;
for (bsize = bot - top; bsize >= THRESH; bsize--) {
for (startw = top; startw <= bot - bsize; startw++)
for (starts = top; starts <= bot - bsize; starts++) {
/* for (curw = startw, curs = starts;
curs < starts + bsize; curw++, curs++)
if (__virtscr->alines[curw]->hash !=
curscr->alines[curs]->hash)
break;
if (curs != starts + bsize)
continue;*/
for (curw = startw, curs = starts;
curs < starts + bsize; curw++, curs++)
if (!lineeq(__virtscr->alines[curw]->line,
curscr->alines[curs]->line,
(size_t) __virtscr->maxx)) {
found = 1;
break;
}
if ((curs == starts + bsize) && (found == 1)) {
goto done;
}
}
}
done:
/* Did not find anything */
if (bsize < THRESH)
return;
/*
* Make sure that there is no overlap between the bottom and top
* regions and the middle scrolled block.
*/
if (bot < curs)
bot = curs - 1;
if (top > starts)
top = starts;
#ifndef HAVE_WCHAR
if (buf[0].ch != curscr->bch) {
for (i = 0; i < BLANKSIZE; i++) {
buf[i].ch = curscr->bch;
buf[i].attr = 0;
buf[i].cflags = CA_BACKGROUND;
}
}
#else
if (buf[0].ch != curscr->bch) {
for (i = 0; i < BLANKSIZE; i++) { /* XXXX: BLANKSIZE may not be valid if wcols > 1 */
buf[i].ch = curscr->bch;
if (_cursesi_copy_nsp(curscr->bnsp, &buf[i]) == ERR)
return;
buf[i].attr = 0;
buf[i].cflags = CA_BACKGROUND;
buf[i].wcols = curscr->wcols;
}
}
#endif /* HAVE_WCHAR */
if (__virtscr->maxx != last_hash_len) {
blank_hash = 0;
for (i = __virtscr->maxx; i > BLANKSIZE; i -= BLANKSIZE) {
blank_hash = __hash_more(buf, sizeof(buf), blank_hash);
}
blank_hash = __hash_more((char *)(void *)buf,
i * sizeof(buf[0]), blank_hash);
/* cache result in static data - screen width doesn't change often */
last_hash_len = __virtscr->maxx;
last_hash = blank_hash;
} else
blank_hash = last_hash;
/*
* Perform the rotation to maintain the consistency of curscr.
* This is hairy since we are doing an *in place* rotation.
* Invariants of the loop:
* - I is the index of the current line.
* - Target is the index of the target of line i.
* - Tmp1 points to current line (i).
* - Tmp2 and points to target line (target);
* - Cur_period is the index of the end of the current period.
* (see below).
*
* There are 2 major issues here that make this rotation non-trivial:
* 1. Scrolling in a scrolling region bounded by the top
* and bottom regions determined (whose size is sc_region).
* 2. As a result of the use of the mod function, there may be a
* period introduced, i.e., 2 maps to 4, 4 to 6, n-2 to 0, and
* 0 to 2, which then causes all odd lines not to be rotated.
* To remedy this, an index of the end ( = beginning) of the
* current 'period' is kept, cur_period, and when it is reached,
* the next period is started from cur_period + 1 which is
* guaranteed not to have been reached since that would mean that
* all records would have been reached. (think about it...).
*
* Lines in the rotation can have 3 attributes which are marked on the
* line so that curscr is consistent with the visual screen.
* 1. Not dirty -- lines inside the scrolled block, top region or
* bottom region.
* 2. Blank lines -- lines in the differential of the scrolling
* region adjacent to top and bot regions
* depending on scrolling direction.
* 3. Dirty line -- all other lines are marked dirty.
*/
sc_region = bot - top + 1;
i = top;
tmp1 = curscr->alines[top];
cur_period = top;
for (j = top; j <= bot; j++) {
target = (i - top + n + sc_region) % sc_region + top;
tmp2 = curscr->alines[target];
curscr->alines[target] = tmp1;
/* Mark block as clean and blank out scrolled lines. */
clp = curscr->alines[target];
__CTRACE(__CTRACE_REFRESH,
"quickch: n=%d startw=%d curw=%d i = %d target=%d ",
n, startw, curw, i, target);
if ((target >= startw && target < curw) || target < top
|| target > bot)
{
__CTRACE(__CTRACE_REFRESH, " notdirty\n");
__virtscr->alines[target]->flags &= ~__ISDIRTY;
} else
if ((n > 0 && target >= top && target < top + n) ||
(n < 0 && target <= bot && target > bot + n))
{
if (clp->hash != blank_hash ||
!lineeq(clp->line, clp->line + 1,
(__virtscr->maxx - 1)) ||
!_cursesi_celleq(clp->line, buf))
{
for (i = __virtscr->maxx;
i > BLANKSIZE;
i -= BLANKSIZE) {
(void) memcpy(clp->line + i -
BLANKSIZE, buf, sizeof(buf));
}
(void)memcpy(clp->line, buf,
i * sizeof(buf[0]));
__CTRACE(__CTRACE_REFRESH,
" blanked out: dirty\n");
clp->hash = blank_hash;
__touchline(__virtscr, target, 0, (int) __virtscr->maxx - 1);
} else {
__CTRACE(__CTRACE_REFRESH,
" -- blank line already: dirty\n");
__touchline(__virtscr, target, 0, (int) __virtscr->maxx - 1);
}
} else {
__CTRACE(__CTRACE_REFRESH, " -- dirty\n");
__touchline(__virtscr, target, 0,
(int)__virtscr->maxx - 1);
}
if (target == cur_period) {
i = target + 1;
tmp1 = curscr->alines[i];
cur_period = i;
} else {
tmp1 = tmp2;
i = target;
}
}
#ifdef DEBUG
__CTRACE(__CTRACE_REFRESH, "$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$\n");
for (i = 0; i < curscr->maxy; i++) {
__CTRACE(__CTRACE_REFRESH, "C: %d:", i);
for (j = 0; j < curscr->maxx; j++)
__CTRACE(__CTRACE_REFRESH, "%c",
curscr->alines[i]->line[j].ch);
__CTRACE(__CTRACE_REFRESH, "\n");
__CTRACE(__CTRACE_REFRESH, "W: %d:", i);
for (j = 0; j < __virtscr->maxx; j++)
__CTRACE(__CTRACE_REFRESH, "%c",
__virtscr->alines[i]->line[j].ch);
__CTRACE(__CTRACE_REFRESH, "\n");
}
#endif
if (n != 0)
scrolln(starts, startw, curs, bot, top);
}
/*
* scrolln --
* Scroll n lines, where n is starts - startw.
*/
static void /* ARGSUSED */
scrolln(int starts, int startw, int curs, int bot, int top)
{
int i, oy, ox, n;
oy = curscr->cury;
ox = curscr->curx;
n = starts - startw;
/*
* XXX
* The initial tests that set __noqch don't let us reach here unless
* we have either cs + ho + SF/sf/SR/sr, or AL + DL. SF/sf and SR/sr
* scrolling can only shift the entire scrolling region, not just a
* part of it, which means that the quickch() routine is going to be
* sadly disappointed in us if we don't have cs as well.
*
* If cs, ho and SF/sf are set, can use the scrolling region. Because
* the cursor position after cs is undefined, we need ho which gives us
* the ability to move to somewhere without knowledge of the current
* location of the cursor. Still call __mvcur() anyway, to update its
* idea of where the cursor is.
*
* When the scrolling region has been set, the cursor has to be at the
* last line of the region to make the scroll happen.
*
* Doing SF/SR or AL/DL appears faster on the screen than either sf/sr
* or AL/DL, and, some terminals have AL/DL, sf/sr, and cs, but not
* SF/SR. So, if we're scrolling almost all of the screen, try and use
* AL/DL, otherwise use the scrolling region. The "almost all" is a
* shameless hack for vi.
*/
if (n > 0) {
if (change_scroll_region != NULL && cursor_home != NULL &&
(parm_index != NULL ||
((parm_insert_line == NULL || parm_delete_line == NULL ||
top > 3 || bot + 3 < __virtscr->maxy) &&
scroll_forward != NULL)))
{
tputs(tiparm(change_scroll_region, top, bot),
0, __cputchar);
__mvcur(oy, ox, 0, 0, 1);
tputs(cursor_home, 0, __cputchar);
__mvcur(0, 0, bot, 0, 1);
if (parm_index != NULL)
tputs(tiparm(parm_index, n),
0, __cputchar);
else
for (i = 0; i < n; i++)
tputs(scroll_forward, 0, __cputchar);
tputs(tiparm(change_scroll_region,
0, (int)__virtscr->maxy - 1), 0, __cputchar);
__mvcur(bot, 0, 0, 0, 1);
tputs(cursor_home, 0, __cputchar);
__mvcur(0, 0, oy, ox, 1);
return;
}
/* Scroll up the block. */
if (parm_index != NULL && top == 0) {
__mvcur(oy, ox, bot, 0, 1);
tputs(tiparm(parm_index, n), 0, __cputchar);
} else
if (parm_delete_line != NULL) {
__mvcur(oy, ox, top, 0, 1);
tputs(tiparm(parm_delete_line, n),
0, __cputchar);
} else
if (delete_line != NULL) {
__mvcur(oy, ox, top, 0, 1);
for (i = 0; i < n; i++)
tputs(delete_line, 0,
__cputchar);
} else
if (scroll_forward != NULL && top == 0) {
__mvcur(oy, ox, bot, 0, 1);
for (i = 0; i < n; i++)
tputs(scroll_forward, 0,
__cputchar);
} else
abort();
/* Push down the bottom region. */
__mvcur(top, 0, bot - n + 1, 0, 1);
if (parm_insert_line != NULL)
tputs(tiparm(parm_insert_line, n), 0, __cputchar);
else {
if (insert_line != NULL) {
for (i = 0; i < n; i++)
tputs(insert_line, 0, __cputchar);
} else
abort();
}
__mvcur(bot - n + 1, 0, oy, ox, 1);
} else {
/*
* !!!
* n < 0
*
* If cs, ho and SR/sr are set, can use the scrolling region.
* See the above comments for details.
*/
if (change_scroll_region != NULL && cursor_home != NULL &&
(parm_rindex != NULL ||
((parm_insert_line == NULL || parm_delete_line == NULL ||
top > 3 ||
bot + 3 < __virtscr->maxy) && scroll_reverse != NULL)))
{
tputs(tiparm(change_scroll_region, top, bot),
0, __cputchar);
__mvcur(oy, ox, 0, 0, 1);
tputs(cursor_home, 0, __cputchar);
__mvcur(0, 0, top, 0, 1);
if (parm_rindex != NULL)
tputs(tiparm(parm_rindex, -n),
0, __cputchar);
else
for (i = n; i < 0; i++)
tputs(scroll_reverse, 0, __cputchar);
tputs(tiparm(change_scroll_region,
0, (int) __virtscr->maxy - 1), 0, __cputchar);
__mvcur(top, 0, 0, 0, 1);
tputs(cursor_home, 0, __cputchar);
__mvcur(0, 0, oy, ox, 1);
return;
}
/* Preserve the bottom lines. */
__mvcur(oy, ox, bot + n + 1, 0, 1);
if (parm_rindex != NULL && bot == __virtscr->maxy)
tputs(tiparm(parm_rindex, -n), 0, __cputchar);
else {
if (parm_delete_line != NULL)
tputs(tiparm(parm_delete_line, -n),
0, __cputchar);
else {
if (delete_line != NULL)
for (i = n; i < 0; i++)
tputs(delete_line,
0, __cputchar);
else {
if (scroll_reverse != NULL &&
bot == __virtscr->maxy)
for (i = n; i < 0; i++)
tputs(scroll_reverse, 0,
__cputchar);
else
abort();
}
}
}
/* Scroll the block down. */
__mvcur(bot + n + 1, 0, top, 0, 1);
if (parm_insert_line != NULL)
tputs(tiparm(parm_insert_line, -n), 0, __cputchar);
else
if (insert_line != NULL)
for (i = n; i < 0; i++)
tputs(insert_line, 0, __cputchar);
else
abort();
__mvcur(top, 0, oy, ox, 1);
}
}
/*
* __unsetattr --
* Unset attributes on curscr. Leave standout, attribute and colour
* modes if necessary (!ms). Always leave altcharset (xterm at least
* ignores a cursor move if we don't).
*/
void /* ARGSUSED */
__unsetattr(int checkms)
{
int isms;
/*
* Don't leave the screen in standout mode (check against ms). Check
* to see if we also turn off underscore, attributes and colour.
*/
if (curscr->wattr & __STANDOUT && isms) {
tputs(exit_standout_mode, 0, __cputchar);
curscr->wattr &= __mask_se;
}
/*
* Don't leave the screen in underscore mode (check against ms).
* Check to see if we also turn off attributes. Assume that we
* also turn off colour.
*/
if (curscr->wattr & __UNDERSCORE && isms) {
tputs(exit_underline_mode, 0, __cputchar);
curscr->wattr &= __mask_ue;
}
/*
* Don't leave the screen with attributes set (check against ms).
* Assume that also turn off colour.
*/
if (curscr->wattr & __TERMATTR && isms) {
tputs(exit_attribute_mode, 0, __cputchar);
curscr->wattr &= __mask_me;
}
/* Don't leave the screen with altcharset set (don't check ms). */
if (curscr->wattr & __ALTCHARSET) {
tputs(exit_alt_charset_mode, 0, __cputchar);
curscr->wattr &= ~__ALTCHARSET;
}
/* Don't leave the screen with colour set (check against ms). */
if (__using_color && isms)
__unset_color(curscr);
}
/* compare two line segments */
static int
lineeq(__LDATA *xl, __LDATA *yl, size_t len)
{
int i = 0;
__LDATA *xp = xl, *yp = yl;
for (i = 0; i < len; i++, xp++, yp++) {
if (!_cursesi_celleq(xp, yp))
return 0;
}
return 1;
}
#ifdef HAVE_WCHAR
/*
* Output the non-spacing characters associated with the given character
* cell to the screen.
*/
void
__cursesi_putnsp(nschar_t *nsp, const int wy, const int wx)
{
nschar_t *p;
/* this shuts up gcc warnings about wx and wy not being used */
if (wx > wy) {
}
p = nsp;
while (p != NULL) {
__cputwchar((int)p->ch);
__CTRACE(__CTRACE_REFRESH,
"_cursesi_putnsp: (%d,%d) non-spacing putwchar(0x%x)\n",
wy, wx - 1, p->ch);
p = p->next;
}
}