2018-12-28 Alan Modra <
[email protected]>
PR 24028
* ppc-dis.c (print_insn_powerpc): Replace PPC_INT_FMT uses with
PRId64/PRIx64.
2018-12-18 Alan Modra <
[email protected]>
* arm-dis.c: Include bfd.h.
* aarch64-opc.c: Include bfd_stdint.h rather than stdint.h.
* csky-dis.c: Likewise.
* nds32-asm.c: Likewise.
* riscv-dis.c: Likewise.
* s12z-dis.c: Likewise.
* wasm32-dis.c: Likewise.
2018-12-07 Jim Wilson <
[email protected]>
PR gas/23956
* riscv-opc.c (riscv_opcodes) <"add">: Use 1 not 0 for fourth arg.
2018-12-06 Andrew Burgess <
[email protected]>
* configure.ac (enable-cgen-maint): Support passing path to cgen
source tree.
* configure: Regenerate.
2018-12-06 Andrew Burgess <
[email protected]>
* disassembler.c (disassemble_init_for_target): Add RISC-V
initialisation.
* riscv-dis.c (riscv_symbol_is_valid): New function.
2018-12-03 Kito Cheng <
[email protected]>
* riscv-opc.c: Change the type of xlen, because type of
xlen_requirement changed.
2018-12-03 Egeyar Bagcioglu <
[email protected]>
PR 23193
PR 19721
* aarch64-tbl.h (aarch64_opcode_table): Only disassemble an ORR
encoding as MOV if the shift operation is a left shift of zero.
2018-11-29 Jim Wilson <
[email protected]>
* riscv-opc.c (unimp): Mark compressed unimp as INSN_ALIAS.
(c.unimp): New.
2018-11-27 Jim Wilson <
[email protected]>
* riscv-opc.c (ciw): Fix whitespace to align columns.
(ca): New.
2018-11-21 John Darrington <
[email protected]>
* s12z-dis.c (print_insn_shift) [SB_REG_REG_N]: Enter special case
if the postbyte matches the appropriate pattern.
2018-11-13 Francois H. Theron <
[email protected]>
* nfp-dis.c: Fix crc[] disassembly if operands are swapped.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_sys_regs_dc): New entries for
IGVAC, IGSW, CGSW, CIGSW, CGVAC, CGVAP, CGVADP, CIGVAC, GVA,
IGDVAC, IGDSW, CGDSW, CIGDSW, CGDVAC, CGDVAP, CGDVADP,
CIGDVAC and GZVA.
(aarch64_sys_ins_reg_supported_p): New check for above.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_sys_regs): New entries for TCO,
TFSRE0_SL1, TFSR_EL1, TFSR_EL2, TFSR_EL3, TFSR_EL12,
RGSR_EL1 and GCR_EL1.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for TCO.
(aarch64_pstatefield_supported_p): New check for above.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-asm.c (aarch64_ins_addr_simple_2): New.
* aarch64-asm.h (ins_addr_simple_2): Declare the above.
* aarch64-dis.c (aarch64_ext_addr_simple_2): New.
* aarch64-dis.h (ext_addr_simple_2): Declare the above.
* aarch64-opc.c (operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed.
(aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2.
* aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv.
(AARCH64_OPERANDS): Define ADDR_SIMPLE_2.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (QL_LDG): New.
(aarch64_opcode_table): Add ldg.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_opnd_qualifiers): Add new data
for AARCH64_OPND_QLF_imm_tag.
(operand_general_constraint_met_p): Add case for
AARCH64_OPND_ADDR_SIMM11 and AARCH64_OPND_ADDR_SIMM13.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_LDST_AT, QL_STGP): New.
(aarch64_opcode_table): Add stg, stzg, st2g, stz2g and stgp
for both offset and pre/post indexed versions.
(AARCH64_OPERANDS): Define ADDR_SIMM11 and ADDR_SIMM13.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_opcode_table): Add subp, subps and cmpp.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-opc.h (aarch64_field_kind): New FLD_imm4_3.
(OPD_F_SHIFT_BY_4, operand_need_shift_by_four): New.
* aarch64-opc.c (fields): Add entry for imm4_3.
(operand_general_constraint_met_p): Add cases for
AARCH64_OPND_UIMM4_ADDG and AARCH64_OPND_UIMM10.
(aarch64_print_operand): Likewise.
* aarch64-tbl.h (QL_ADDG): New.
(aarch64_opcode_table): Add addg, subg, irg and gmi.
(AARCH64_OPERANDS): Define UIMM4_ADDG and UIMM10.
* aarch64-asm.c (aarch64_ins_imm): Add case for
operand_need_shift_by_four.
* aarch64-asm-2.c: Regenerated.
* aarch64-dis-2.c: Regenerated.
* aarch64-opc-2.c: Regenerated.
2018-11-12 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_feature_memtag): New.
(MEMTAG, MEMTAG_INSN): New.
2018-11-06 Sudakshina Das <
[email protected]>
* arm-dis.c (select_arm_features): Update bfd_mach_arm_8
with Armv8.5-A. Remove reduntant ARM_EXT2_FP16_FML.
2018-11-06 Alan Modra <
[email protected]>
* ppc-opc.c (insert_arx, insert_ary, insert_rx, insert_ry, insert_ls),
(insert_evuimm1_ex0, insert_evuimm2_ex0, insert_evuimm4_ex0),
(insert_evuimm8_ex0, insert_evuimm_lt8, insert_evuimm_lt16),
(insert_rD_rS_even, insert_off_lsp, insert_off_spe2, insert_Ddd):
Don't return zero on error, insert mask bits instead.
(insert_sd4h, extract_sd4h, insert_sd4w, extract_sd4w): Delete.
(insert_sh6, extract_sh6): Delete dead code.
(insert_sprbat, insert_sprg): Use unsigned comparisions.
(powerpc_operands <OIMM>): Set shift count rather than using
PPC_OPSHIFT_INV.
<SE_SDH, SE_SDW>: Likewise. Don't use insert/extract functions.
2018-11-06 Jan Beulich <
[email protected]>
* i386-dis-evex.h (evex_table): Use K suffix instead of %LW for
vpbroadcast{d,q} with GPR operand.
2018-11-06 Jan Beulich <
[email protected]>
* i386-dis.c (EVEX_W_0F6E_P_2, EVEX_W_0F7E_P_2): Delete.
* i386-dis-evex.h (evex_table): Move vmov[dq} with GPR operand
cases up one level in the hierarchy.
2018-11-06 Jan Beulich <
[email protected]>
* i386-dis.c (MOD_VEX_W_0_0F92_P_3_LEN_0,
MOD_VEX_W_1_0F92_P_3_LEN_0): Fold into MOD_VEX_0F92_P_3_LEN_0.
(MOD_VEX_W_0_0F93_P_3_LEN_0, MOD_VEX_W_1_0F93_P_3_LEN_0): Fold
into MOD_VEX_0F93_P_3_LEN_0.
(vex_len_table, vex_w_table, mod_table): Move kmov[dq} with GPR
operand cases up one level in the hierarchy.
2018-11-06 Jan Beulich <
[email protected]>
* i386-dis.c (VEX_W_0FC4_P_2, VEX_W_0FC5_P_2, VEX_W_0F3A14_P_2,
VEX_W_0F3A15_P_2, VEX_W_0F3A20_P_2, EVEX_W_0F3A16_P_2,
EVEX_W_0F3A22_P_2): Delete.
(vex_len_table, vex_w_table): Move vpextr{b,w} and vpinsr{b,w}
entries up one level in the hierarchy.
(OP_E_memory): Handle dq_mode when determining Disp8 shift
value.
* i386-dis-evex.h (evex_table): Move vpextr{d,q} and vpinsr{d,q}
entries up one level in the hierarchy.
* i386-opc.tbl (vpextrb, vpextrw, vpinsrb, vpinsrw): Change to
VexWIG for AVX flavors.
* i386-tbl.h: Re-generate.
2018-11-06 Jan Beulich <
[email protected]>
* i386-opc.tbl (vcvtsi2sd, vcvtsi2ss, vmovd, vpcmpestri,
vpcmpestrm, vpextrd, vpinsrd, vpbroadcastd, vcvtusi2sd,
vcvtusi2ss, kmovd): Drop VexW=1.
* i386-tbl.h: Re-generate.
2018-11-06 Jan Beulich <
[email protected]>
* i386-opc.tbl (Vex128, Vex256, VexLIG, EVex128, EVex256,
EVex512, EVexLIG, EVexDYN): New.
(ldmxcsr, stmxcsr, vldmxcsr, vstmxcsr, all BMI, BMI2, and TBM
insns): Use Vex128 instead of Vex=3 (aka VexLIG).
(vextractps, vinsertps, vpextr*, vpinsr*): Use EVex128 instead
of EVex=4 (aka EVexLIG).
* i386-tbl.h: Re-generate.
2018-11-06 Jan Beulich <
[email protected]>
* i386-opc.tbl (pextrw, vpextrw): Add Load to 0F C5 forms.
(vpmaxub): Re-order attributes on AVX512BW flavor.
* i386-tbl.h: Re-generate.
2018-11-06 Jan Beulich <
[email protected]>
* i386-opc.tbl (vandnp*, vandp*, vcmp*, vcvtss2sd, vorp*,
vpmaxub, vmovntdqa, vmpsadbw, vphsub*): Use VexWIG instead of
Vex=1 on AVX / AVX2 flavors.
(vpmaxub): Re-order attributes on AVX512BW flavor.
* i386-tbl.h: Re-generate.
2018-11-06 Jan Beulich <
[email protected]>
* i386-opc.tbl (VexW0, VexW1): New.
(vphadd*, vphsub*): Use VexW0 on XOP variants.
* i386-tbl.h: Re-generate.
2018-10-22 John Darrington <
[email protected]>
* s12z-dis.c (decode_possible_symbol): Add fallback case.
(rel_15_7): Likewise.
2018-10-19 Tamar Christina <
[email protected]>
* arm-dis.c (UNKNOWN_INSTRUCTION_32BIT): Format specifier for arm mode.
(UNKNOWN_INSTRUCTION_16BIT): Format specifier for thumb mode.
(print_insn_arm, print_insn_thumb16, print_insn_thumb32): Use them.
2018-10-16 Matthew Malcomson <
[email protected]>
* aarch64-opc.c (struct operand_qualifier_data): Change qualifier data
corresponding to AARCH64_OPND_QLF_S_4B qualifier.
2018-10-10 Jan Beulich <
[email protected]>
* i386-gen.c (opcode_modifiers): Drop Size16, Size32, and
Size64. Add Size.
* i386-opc.h (Size16, Size32, Size64): Delete.
(Size): New.
(SIZE16, SIZE32, SIZE64): Define.
(struct i386_opcode_modifier): Drop size16, size32, and size64.
Add size.
* i386-opc.tbl (Size16, Size32, Size64): Define.
* i386-tbl.h: Re-generate.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-opc.c (operand_general_constraint_met_p): Add
SSBS in the check for one-bit immediate.
(aarch64_sys_regs): New entry for SSBS.
(aarch64_sys_reg_supported_p): New check for above.
(aarch64_pstatefields): New entry for SSBS.
(aarch64_pstatefield_supported_p): New check for above.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_sys_regs): New entries for
scxtnum_el[0,1,2,3,12] and id_pfr2_el1.
(aarch64_sys_reg_supported_p): New checks for above.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-opc.h (HINT_OPD_NOPRINT, HINT_ENCODE): New.
(HINT_FLAG, HINT_VALUE): New macros to encode NO_PRINT flag
with the hint immediate.
* aarch64-opc.c (aarch64_hint_options): New entries for
c, j, jc and default (with HINT_OPD_F_NOPRINT flag) for BTI.
(aarch64_print_operand): Add case for AARCH64_OPND_BTI_TARGET
while checking for HINT_OPD_F_NOPRINT flag.
* aarch64-dis.c (aarch64_ext_hint): Use new HINT_VALUE to
extract value.
* aarch64-tbl.h (aarch64_feature_bti, BTI, BTI_INSN): New.
(aarch64_opcode_table): Add entry for BTI.
(AARCH64_OPERANDS): Add new description for BTI targets.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_sys_regs): New entries for
rndr and rndrrs.
(aarch64_sys_reg_supported_p): New check for above.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-opc.c (aarch64_sys_regs_dc): New entry for cvadp.
(aarch64_sys_ins_reg_supported_p): New check for above.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-dis.c (aarch64_ext_sysins_op): Add case for
AARCH64_OPND_SYSREG_SR.
* aarch64-opc.c (aarch64_print_operand): Likewise.
(aarch64_sys_regs_sr): Define table.
(aarch64_sys_ins_reg_supported_p): Check for RCTX with
AARCH64_FEATURE_PREDRES.
* aarch64-tbl.h (aarch64_feature_predres): New.
(PREDRES, PREDRES_INSN): New.
(aarch64_opcode_table): Add entries for cfp, dvp and cpp.
(AARCH64_OPERANDS): Add new description for SYSREG_SR.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_feature_sb): New.
(SB, SB_INSN): New.
(aarch64_opcode_table): Add entry for sb.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_feature_flagmanip): New.
(aarch64_feature_frintts): New.
(FLAGMANIP, FRINTTS): New.
(aarch64_opcode_table): Add entries for xaflag, axflag
and frint[32,64][x,z] instructions.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-10-09 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_feature_set aarch64_feature_v8_5): New.
(ARMV8_5, V8_5_INSN): New.
2018-10-08 Tamar Christina <
[email protected]>
* aarch64-opc.c (verify_constraints): Use memset instead of {0}.
2018-10-05 H.J. Lu <
[email protected]>
* i386-dis.c (rm_table): Add enclv.
* i386-opc.tbl: Add enclv.
* i386-tbl.h: Regenerated.
2018-10-05 Sudakshina Das <
[email protected]>
* arm-dis.c (arm_opcodes): Add sb.
(thumb32_opcodes): Likewise.
2018-10-05 Richard Henderson <
[email protected]>
Stafford Horne <
[email protected]>
* or1k-desc.c: Regenerate.
* or1k-desc.h: Regenerate.
* or1k-opc.c: Regenerate.
* or1k-opc.h: Regenerate.
* or1k-opinst.c: Regenerate.
2018-10-05 Richard Henderson <
[email protected]>
* or1k-asm.c: Regenerated.
* or1k-desc.c: Regenerated.
* or1k-desc.h: Regenerated.
* or1k-dis.c: Regenerated.
* or1k-ibld.c: Regenerated.
* or1k-opc.c: Regenerated.
* or1k-opc.h: Regenerated.
* or1k-opinst.c: Regenerated.
2018-10-05 Richard Henderson <
[email protected]>
* or1k-asm.c: Regenerate.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-asm.c (aarch64_opcode_encode): Apply constraint verifier.
* aarch64-dis.c (print_operands): Refactor to take notes.
(print_verifier_notes): New.
(print_aarch64_insn): Apply constraint verifier.
(print_insn_aarch64_word): Update call to print_aarch64_insn.
* aarch64-opc.c (aarch64_print_operand): Remove attribute, update notes format.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-opc.c (init_insn_block): New.
(verify_constraints, aarch64_is_destructive_by_operands): New.
* aarch64-opc.h (verify_constraints): New.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-dis.c (aarch64_opcode_decode): Update verifier call.
* aarch64-opc.c (verify_ldpsw): Update arguments.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-dis.c (ERR_OK, ERR_UND, ERR_UNP, ERR_NYI): Remove.
(aarch64_decode_insn, print_insn_aarch64_word): Use err_type.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-asm.c (aarch64_opcode_encode): Add insn_sequence.
* aarch64-dis.c (insn_sequence): New.
2018-10-03 Tamar Christina <
[email protected]>
* aarch64-tbl.h (CORE_INSN, __FP_INSN, SIMD_INSN, CRYP_INSN, _CRC_INSN,
_LSE_INSN, _LOR_INSN, RDMA_INSN, FF16_INSN, SF16_INSN, V8_2_INSN,
_SVE_INSN, V8_3_INSN, CNUM_INSN, RCPC_INSN, SHA2_INSN, AES_INSN,
V8_4_INSN, SHA3_INSN, SM4_INSN, FP16_V8_2_INSN, DOT_INSN): Initialize
constraints.
(_SVE_INSNC): New.
(struct aarch64_opcode): (fjcvtzs, ldpsw, ldpsw, esb, psb): Initialize
constraints.
(movprfx): Change _SVE_INSN into _SVE_INSNC, add C_SCAN_MOVPRFX and
F_SCAN flags.
(msb, mul, neg, not, orr, rbit, revb, revh, revw, sabd, scvtf,
sdiv, sdivr, sdot, smax, smin, smulh, splice, sqadd, sqdecd, sqdech,
sqdecp, sqdecw, sqincd, sqinch, sqincp, sqincw, sqsub, sub, subr, sxtb,
sxth, sxtw, uabd, ucvtf, udiv, udivr, udot, umax, umin, umulh, uqadd,
uqdecd, uqdech, uqdecp, uqdecw, uqincd, uqinch, uqincp, uqincw, uqsub,
uxtb, uxth, uxtw, bic, eon, orn, mov, fmov): Change _SVE_INSN into _SVE_INSNC and add
C_SCAN_MOVPRFX and C_MAX_ELEM constraints.
2018-10-02 Palmer Dabbelt <
[email protected]>
* riscv-opc.c (riscv_opcodes) <fence.tso>: New opcode.
2018-09-23 Sandra Loosemore <
[email protected]>
* nios2-dis.c (nios2_print_insn_arg): Make sure signed conversions
are used when extracting signed fields and converting them to
potentially 64-bit types.
2018-09-21 Simon Marchi <
[email protected]>
* Makefile.am: Remove NO_WMISSING_FIELD_INITIALIZERS.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
* configure.ac: Remove check for -Wno-missing-field-initializers.
* csky-opc.h (csky_v1_opcodes): Initialize all fields of last element.
(csky_v2_opcodes): Likewise.
2018-09-20 Maciej W. Rozycki <
[email protected]>
* arc-nps400-tbl.h: Append `ull' to large constants throughout.
2018-09-20 Nelson Chu <
[email protected]>
* nds32-asm.c (operand_fields): Remove the unused fields.
(nds32_opcodes): Remove the unused instructions.
* nds32-dis.c (nds32_ex9_info): Removed.
(nds32_parse_opcode): Updated.
(print_insn_nds32): Likewise.
* nds32-asm.c (config.h, stdlib.h, string.h): New includes.
(LEX_SET_FIELD, LEX_GET_FIELD): Update defines.
(nds32_asm_init, build_operand_hash_table, build_keyword_hash_table,
build_opcode_hash_table): New functions.
(nds32_keyword_table, nds32_keyword_count_table, nds32_field_table,
nds32_opcode_table): New.
(hw_ktabs): Declare it to a pointer rather than an array.
(build_hash_table): Removed.
* nds32-asm.h (enum): Add SYN_INPUT, SYN_OUTPUT, SYN_LOPT,
SYN_ROPT and upadte HW_GPR and HW_INT.
* nds32-dis.c (keywords): Remove const.
(match_field): New function.
(nds32_parse_opcode): Updated.
* disassemble.c (disassemble_init_for_target):
Add disassemble_init_nds32.
* nds32-dis.c (eum map_type): New.
(nds32_private_data): Likewise.
(get_mapping_symbol_type, is_mapping_symbol, nds32_symbol_is_valid,
nds32_add_opcode_hash_table, disassemble_init_nds32): New functions.
(print_insn_nds32): Updated.
* nds32-asm.c (parse_aext_reg): Add new parameter.
(parse_re, parse_re2, parse_aext_reg): Only reduced registers
are allowed to use.
All callers changed.
* nds32-asm.c (keyword_usr, keyword_sr): Updated.
(operand_fields): Add new fields.
(nds32_opcodes): Add new instructions.
(keyword_aridxi_mx): New keyword.
* nds32-asm.h (enum): Add NASM_ATTR_DSP_ISAEXT, HW_AEXT_ARIDXI_MX
and NASM_ATTR_ZOL.
(ALU2_1, ALU2_2, ALU2_3): New macros.
* nds32-dis.c (nds32_filter_unknown_insn): Updated.
2018-09-17 Kito Cheng <
[email protected]>
* riscv-opc.c (riscv_opcodes): Adjust the order of ble and bleu.
2018-09-17 H.J. Lu <
[email protected]>
PR gas/23670
* i386-dis-evex.h (evex_table): Use EVEX_LEN_0F6E_P_2,
EVEX_LEN_0F7E_P_1, EVEX_LEN_0F7E_P_2 and EVEX_LEN_0FD6_P_2.
(EVEX_LEN_0F6E_P_2): New EVEX_LEN_TABLE entry.
(EVEX_LEN_0F7E_P_1): Likewise.
(EVEX_LEN_0F7E_P_2): Likewise.
(EVEX_LEN_0FD6_P_2): Likewise.
* i386-dis.c (USE_EVEX_LEN_TABLE): New.
(EVEX_LEN_TABLE): Likewise.
(EVEX_LEN_0F6E_P_2): New enum.
(EVEX_LEN_0F7E_P_1): Likewise.
(EVEX_LEN_0F7E_P_2): Likewise.
(EVEX_LEN_0FD6_P_2): Likewise.
(evex_len_table): New.
(get_valid_dis386): Handle USE_EVEX_LEN_TABLE.
* i386-opc.tbl: Set EVex=2 on EVEX.128 only vmovd and vmovq.
* i386-tbl.h: Regenerated.
2018-09-17 H.J. Lu <
[email protected]>
PR gas/23665
* i386-dis.c (vex_len_table): Update VEX_LEN_0F6E_P_2 and
VEX_LEN_0F7E_P_2 entries.
* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovd and vmovq.
* i386-tbl.h: Regenerated.
2018-09-17 H.J. Lu <
[email protected]>
* i386-dis.c (VZERO_Fixup): Removed.
(VZERO): Likewise.
(VEX_LEN_0F10_P_1): Likewise.
(VEX_LEN_0F10_P_3): Likewise.
(VEX_LEN_0F11_P_1): Likewise.
(VEX_LEN_0F11_P_3): Likewise.
(VEX_LEN_0F2E_P_0): Likewise.
(VEX_LEN_0F2E_P_2): Likewise.
(VEX_LEN_0F2F_P_0): Likewise.
(VEX_LEN_0F2F_P_2): Likewise.
(VEX_LEN_0F51_P_1): Likewise.
(VEX_LEN_0F51_P_3): Likewise.
(VEX_LEN_0F52_P_1): Likewise.
(VEX_LEN_0F53_P_1): Likewise.
(VEX_LEN_0F58_P_1): Likewise.
(VEX_LEN_0F58_P_3): Likewise.
(VEX_LEN_0F59_P_1): Likewise.
(VEX_LEN_0F59_P_3): Likewise.
(VEX_LEN_0F5A_P_1): Likewise.
(VEX_LEN_0F5A_P_3): Likewise.
(VEX_LEN_0F5C_P_1): Likewise.
(VEX_LEN_0F5C_P_3): Likewise.
(VEX_LEN_0F5D_P_1): Likewise.
(VEX_LEN_0F5D_P_3): Likewise.
(VEX_LEN_0F5E_P_1): Likewise.
(VEX_LEN_0F5E_P_3): Likewise.
(VEX_LEN_0F5F_P_1): Likewise.
(VEX_LEN_0F5F_P_3): Likewise.
(VEX_LEN_0FC2_P_1): Likewise.
(VEX_LEN_0FC2_P_3): Likewise.
(VEX_LEN_0F3A0A_P_2): Likewise.
(VEX_LEN_0F3A0B_P_2): Likewise.
(VEX_W_0F10_P_0): Likewise.
(VEX_W_0F10_P_1): Likewise.
(VEX_W_0F10_P_2): Likewise.
(VEX_W_0F10_P_3): Likewise.
(VEX_W_0F11_P_0): Likewise.
(VEX_W_0F11_P_1): Likewise.
(VEX_W_0F11_P_2): Likewise.
(VEX_W_0F11_P_3): Likewise.
(VEX_W_0F12_P_0_M_0): Likewise.
(VEX_W_0F12_P_0_M_1): Likewise.
(VEX_W_0F12_P_1): Likewise.
(VEX_W_0F12_P_2): Likewise.
(VEX_W_0F12_P_3): Likewise.
(VEX_W_0F13_M_0): Likewise.
(VEX_W_0F14): Likewise.
(VEX_W_0F15): Likewise.
(VEX_W_0F16_P_0_M_0): Likewise.
(VEX_W_0F16_P_0_M_1): Likewise.
(VEX_W_0F16_P_1): Likewise.
(VEX_W_0F16_P_2): Likewise.
(VEX_W_0F17_M_0): Likewise.
(VEX_W_0F28): Likewise.
(VEX_W_0F29): Likewise.
(VEX_W_0F2B_M_0): Likewise.
(VEX_W_0F2E_P_0): Likewise.
(VEX_W_0F2E_P_2): Likewise.
(VEX_W_0F2F_P_0): Likewise.
(VEX_W_0F2F_P_2): Likewise.
(VEX_W_0F50_M_0): Likewise.
(VEX_W_0F51_P_0): Likewise.
(VEX_W_0F51_P_1): Likewise.
(VEX_W_0F51_P_2): Likewise.
(VEX_W_0F51_P_3): Likewise.
(VEX_W_0F52_P_0): Likewise.
(VEX_W_0F52_P_1): Likewise.
(VEX_W_0F53_P_0): Likewise.
(VEX_W_0F53_P_1): Likewise.
(VEX_W_0F58_P_0): Likewise.
(VEX_W_0F58_P_1): Likewise.
(VEX_W_0F58_P_2): Likewise.
(VEX_W_0F58_P_3): Likewise.
(VEX_W_0F59_P_0): Likewise.
(VEX_W_0F59_P_1): Likewise.
(VEX_W_0F59_P_2): Likewise.
(VEX_W_0F59_P_3): Likewise.
(VEX_W_0F5A_P_0): Likewise.
(VEX_W_0F5A_P_1): Likewise.
(VEX_W_0F5A_P_3): Likewise.
(VEX_W_0F5B_P_0): Likewise.
(VEX_W_0F5B_P_1): Likewise.
(VEX_W_0F5B_P_2): Likewise.
(VEX_W_0F5C_P_0): Likewise.
(VEX_W_0F5C_P_1): Likewise.
(VEX_W_0F5C_P_2): Likewise.
(VEX_W_0F5C_P_3): Likewise.
(VEX_W_0F5D_P_0): Likewise.
(VEX_W_0F5D_P_1): Likewise.
(VEX_W_0F5D_P_2): Likewise.
(VEX_W_0F5D_P_3): Likewise.
(VEX_W_0F5E_P_0): Likewise.
(VEX_W_0F5E_P_1): Likewise.
(VEX_W_0F5E_P_2): Likewise.
(VEX_W_0F5E_P_3): Likewise.
(VEX_W_0F5F_P_0): Likewise.
(VEX_W_0F5F_P_1): Likewise.
(VEX_W_0F5F_P_2): Likewise.
(VEX_W_0F5F_P_3): Likewise.
(VEX_W_0F60_P_2): Likewise.
(VEX_W_0F61_P_2): Likewise.
(VEX_W_0F62_P_2): Likewise.
(VEX_W_0F63_P_2): Likewise.
(VEX_W_0F64_P_2): Likewise.
(VEX_W_0F65_P_2): Likewise.
(VEX_W_0F66_P_2): Likewise.
(VEX_W_0F67_P_2): Likewise.
(VEX_W_0F68_P_2): Likewise.
(VEX_W_0F69_P_2): Likewise.
(VEX_W_0F6A_P_2): Likewise.
(VEX_W_0F6B_P_2): Likewise.
(VEX_W_0F6C_P_2): Likewise.
(VEX_W_0F6D_P_2): Likewise.
(VEX_W_0F6F_P_1): Likewise.
(VEX_W_0F6F_P_2): Likewise.
(VEX_W_0F70_P_1): Likewise.
(VEX_W_0F70_P_2): Likewise.
(VEX_W_0F70_P_3): Likewise.
(VEX_W_0F71_R_2_P_2): Likewise.
(VEX_W_0F71_R_4_P_2): Likewise.
(VEX_W_0F71_R_6_P_2): Likewise.
(VEX_W_0F72_R_2_P_2): Likewise.
(VEX_W_0F72_R_4_P_2): Likewise.
(VEX_W_0F72_R_6_P_2): Likewise.
(VEX_W_0F73_R_2_P_2): Likewise.
(VEX_W_0F73_R_3_P_2): Likewise.
(VEX_W_0F73_R_6_P_2): Likewise.
(VEX_W_0F73_R_7_P_2): Likewise.
(VEX_W_0F74_P_2): Likewise.
(VEX_W_0F75_P_2): Likewise.
(VEX_W_0F76_P_2): Likewise.
(VEX_W_0F77_P_0): Likewise.
(VEX_W_0F7C_P_2): Likewise.
(VEX_W_0F7C_P_3): Likewise.
(VEX_W_0F7D_P_2): Likewise.
(VEX_W_0F7D_P_3): Likewise.
(VEX_W_0F7E_P_1): Likewise.
(VEX_W_0F7F_P_1): Likewise.
(VEX_W_0F7F_P_2): Likewise.
(VEX_W_0FAE_R_2_M_0): Likewise.
(VEX_W_0FAE_R_3_M_0): Likewise.
(VEX_W_0FC2_P_0): Likewise.
(VEX_W_0FC2_P_1): Likewise.
(VEX_W_0FC2_P_2): Likewise.
(VEX_W_0FC2_P_3): Likewise.
(VEX_W_0FD0_P_2): Likewise.
(VEX_W_0FD0_P_3): Likewise.
(VEX_W_0FD1_P_2): Likewise.
(VEX_W_0FD2_P_2): Likewise.
(VEX_W_0FD3_P_2): Likewise.
(VEX_W_0FD4_P_2): Likewise.
(VEX_W_0FD5_P_2): Likewise.
(VEX_W_0FD6_P_2): Likewise.
(VEX_W_0FD7_P_2_M_1): Likewise.
(VEX_W_0FD8_P_2): Likewise.
(VEX_W_0FD9_P_2): Likewise.
(VEX_W_0FDA_P_2): Likewise.
(VEX_W_0FDB_P_2): Likewise.
(VEX_W_0FDC_P_2): Likewise.
(VEX_W_0FDD_P_2): Likewise.
(VEX_W_0FDE_P_2): Likewise.
(VEX_W_0FDF_P_2): Likewise.
(VEX_W_0FE0_P_2): Likewise.
(VEX_W_0FE1_P_2): Likewise.
(VEX_W_0FE2_P_2): Likewise.
(VEX_W_0FE3_P_2): Likewise.
(VEX_W_0FE4_P_2): Likewise.
(VEX_W_0FE5_P_2): Likewise.
(VEX_W_0FE6_P_1): Likewise.
(VEX_W_0FE6_P_2): Likewise.
(VEX_W_0FE6_P_3): Likewise.
(VEX_W_0FE7_P_2_M_0): Likewise.
(VEX_W_0FE8_P_2): Likewise.
(VEX_W_0FE9_P_2): Likewise.
(VEX_W_0FEA_P_2): Likewise.
(VEX_W_0FEB_P_2): Likewise.
(VEX_W_0FEC_P_2): Likewise.
(VEX_W_0FED_P_2): Likewise.
(VEX_W_0FEE_P_2): Likewise.
(VEX_W_0FEF_P_2): Likewise.
(VEX_W_0FF0_P_3_M_0): Likewise.
(VEX_W_0FF1_P_2): Likewise.
(VEX_W_0FF2_P_2): Likewise.
(VEX_W_0FF3_P_2): Likewise.
(VEX_W_0FF4_P_2): Likewise.
(VEX_W_0FF5_P_2): Likewise.
(VEX_W_0FF6_P_2): Likewise.
(VEX_W_0FF7_P_2): Likewise.
(VEX_W_0FF8_P_2): Likewise.
(VEX_W_0FF9_P_2): Likewise.
(VEX_W_0FFA_P_2): Likewise.
(VEX_W_0FFB_P_2): Likewise.
(VEX_W_0FFC_P_2): Likewise.
(VEX_W_0FFD_P_2): Likewise.
(VEX_W_0FFE_P_2): Likewise.
(VEX_W_0F3800_P_2): Likewise.
(VEX_W_0F3801_P_2): Likewise.
(VEX_W_0F3802_P_2): Likewise.
(VEX_W_0F3803_P_2): Likewise.
(VEX_W_0F3804_P_2): Likewise.
(VEX_W_0F3805_P_2): Likewise.
(VEX_W_0F3806_P_2): Likewise.
(VEX_W_0F3807_P_2): Likewise.
(VEX_W_0F3808_P_2): Likewise.
(VEX_W_0F3809_P_2): Likewise.
(VEX_W_0F380A_P_2): Likewise.
(VEX_W_0F380B_P_2): Likewise.
(VEX_W_0F3817_P_2): Likewise.
(VEX_W_0F381C_P_2): Likewise.
(VEX_W_0F381D_P_2): Likewise.
(VEX_W_0F381E_P_2): Likewise.
(VEX_W_0F3820_P_2): Likewise.
(VEX_W_0F3821_P_2): Likewise.
(VEX_W_0F3822_P_2): Likewise.
(VEX_W_0F3823_P_2): Likewise.
(VEX_W_0F3824_P_2): Likewise.
(VEX_W_0F3825_P_2): Likewise.
(VEX_W_0F3828_P_2): Likewise.
(VEX_W_0F3829_P_2): Likewise.
(VEX_W_0F382A_P_2_M_0): Likewise.
(VEX_W_0F382B_P_2): Likewise.
(VEX_W_0F3830_P_2): Likewise.
(VEX_W_0F3831_P_2): Likewise.
(VEX_W_0F3832_P_2): Likewise.
(VEX_W_0F3833_P_2): Likewise.
(VEX_W_0F3834_P_2): Likewise.
(VEX_W_0F3835_P_2): Likewise.
(VEX_W_0F3837_P_2): Likewise.
(VEX_W_0F3838_P_2): Likewise.
(VEX_W_0F3839_P_2): Likewise.
(VEX_W_0F383A_P_2): Likewise.
(VEX_W_0F383B_P_2): Likewise.
(VEX_W_0F383C_P_2): Likewise.
(VEX_W_0F383D_P_2): Likewise.
(VEX_W_0F383E_P_2): Likewise.
(VEX_W_0F383F_P_2): Likewise.
(VEX_W_0F3840_P_2): Likewise.
(VEX_W_0F3841_P_2): Likewise.
(VEX_W_0F38DB_P_2): Likewise.
(VEX_W_0F3A08_P_2): Likewise.
(VEX_W_0F3A09_P_2): Likewise.
(VEX_W_0F3A0A_P_2): Likewise.
(VEX_W_0F3A0B_P_2): Likewise.
(VEX_W_0F3A0C_P_2): Likewise.
(VEX_W_0F3A0D_P_2): Likewise.
(VEX_W_0F3A0E_P_2): Likewise.
(VEX_W_0F3A0F_P_2): Likewise.
(VEX_W_0F3A21_P_2): Likewise.
(VEX_W_0F3A40_P_2): Likewise.
(VEX_W_0F3A41_P_2): Likewise.
(VEX_W_0F3A42_P_2): Likewise.
(VEX_W_0F3A62_P_2): Likewise.
(VEX_W_0F3A63_P_2): Likewise.
(VEX_W_0F3ADF_P_2): Likewise.
(VEX_LEN_0F77_P_0): New.
(prefix_table): Update PREFIX_VEX_0F10, PREFIX_VEX_0F11,
PREFIX_VEX_0F12, PREFIX_VEX_0F16, PREFIX_VEX_0F2E,
PREFIX_VEX_0F2F, PREFIX_VEX_0F51, PREFIX_VEX_0F52,
PREFIX_VEX_0F53, PREFIX_VEX_0F58, PREFIX_VEX_0F59,
PREFIX_VEX_0F5A, PREFIX_VEX_0F5B, PREFIX_VEX_0F5C,
PREFIX_VEX_0F5D, PREFIX_VEX_0F5E, PREFIX_VEX_0F5F,
PREFIX_VEX_0F60, PREFIX_VEX_0F61, PREFIX_VEX_0F62,
PREFIX_VEX_0F63, PREFIX_VEX_0F64, PREFIX_VEX_0F65,
PREFIX_VEX_0F66, PREFIX_VEX_0F67, PREFIX_VEX_0F68,
PREFIX_VEX_0F69, PREFIX_VEX_0F6A, PREFIX_VEX_0F6B,
PREFIX_VEX_0F6C, PREFIX_VEX_0F6D, PREFIX_VEX_0F6F,
PREFIX_VEX_0F70, PREFIX_VEX_0F71_REG_2, PREFIX_VEX_0F71_REG_4,
PREFIX_VEX_0F71_REG_6, PREFIX_VEX_0F72_REG_4,
PREFIX_VEX_0F72_REG_6, PREFIX_VEX_0F73_REG_2,
PREFIX_VEX_0F73_REG_3, PREFIX_VEX_0F73_REG_6,
PREFIX_VEX_0F73_REG_7, PREFIX_VEX_0F74, PREFIX_VEX_0F75,
PREFIX_VEX_0F76, PREFIX_VEX_0F77, PREFIX_VEX_0F7C,
PREFIX_VEX_0F7D, PREFIX_VEX_0F7F, PREFIX_VEX_0FC2,
PREFIX_VEX_0FD0, PREFIX_VEX_0FD1, PREFIX_VEX_0FD2,
PREFIX_VEX_0FD3, PREFIX_VEX_0FD4, PREFIX_VEX_0FD5,
PREFIX_VEX_0FD8, PREFIX_VEX_0FD9, PREFIX_VEX_0FDA,
PREFIX_VEX_0FDC, PREFIX_VEX_0FDD, PREFIX_VEX_0FDE,
PREFIX_VEX_0FDF, PREFIX_VEX_0FE0, PREFIX_VEX_0FE1,
PREFIX_VEX_0FE2, PREFIX_VEX_0FE3, PREFIX_VEX_0FE4,
PREFIX_VEX_0FE5, PREFIX_VEX_0FE6, PREFIX_VEX_0FE8,
PREFIX_VEX_0FE9, PREFIX_VEX_0FEA, PREFIX_VEX_0FEB,
PREFIX_VEX_0FEC, PREFIX_VEX_0FED, PREFIX_VEX_0FEE,
PREFIX_VEX_0FEF, PREFIX_VEX_0FF1. PREFIX_VEX_0FF2,
PREFIX_VEX_0FF3, PREFIX_VEX_0FF4, PREFIX_VEX_0FF5,
PREFIX_VEX_0FF6, PREFIX_VEX_0FF8, PREFIX_VEX_0FF9,
PREFIX_VEX_0FFA, PREFIX_VEX_0FFB, PREFIX_VEX_0FFC,
PREFIX_VEX_0FFD, PREFIX_VEX_0FFE, PREFIX_VEX_0F3800,
PREFIX_VEX_0F3801, PREFIX_VEX_0F3802, PREFIX_VEX_0F3803,
PREFIX_VEX_0F3804, PREFIX_VEX_0F3805, PREFIX_VEX_0F3806,
PREFIX_VEX_0F3807, PREFIX_VEX_0F3808, PREFIX_VEX_0F3809,
PREFIX_VEX_0F380A, PREFIX_VEX_0F380B, PREFIX_VEX_0F3817,
PREFIX_VEX_0F381C, PREFIX_VEX_0F381D, PREFIX_VEX_0F381E,
PREFIX_VEX_0F3820, PREFIX_VEX_0F3821, PREFIX_VEX_0F3822,
PREFIX_VEX_0F3823, PREFIX_VEX_0F3824, PREFIX_VEX_0F3825,
PREFIX_VEX_0F3828, PREFIX_VEX_0F3829, PREFIX_VEX_0F382B,
PREFIX_VEX_0F382C, PREFIX_VEX_0F3831, PREFIX_VEX_0F3832,
PREFIX_VEX_0F3833, PREFIX_VEX_0F3834, PREFIX_VEX_0F3835,
PREFIX_VEX_0F3837, PREFIX_VEX_0F3838, PREFIX_VEX_0F3839,
PREFIX_VEX_0F383A, PREFIX_VEX_0F383B, PREFIX_VEX_0F383C,
PREFIX_VEX_0F383D, PREFIX_VEX_0F383E, PREFIX_VEX_0F383F,
PREFIX_VEX_0F3840, PREFIX_VEX_0F3A08, PREFIX_VEX_0F3A09,
PREFIX_VEX_0F3A0A, PREFIX_VEX_0F3A0B, PREFIX_VEX_0F3A0C,
PREFIX_VEX_0F3A0D, PREFIX_VEX_0F3A0E, PREFIX_VEX_0F3A0F,
PREFIX_VEX_0F3A40 and PREFIX_VEX_0F3A42 entries.
(vex_table): Update VEX 0F28 and 0F29 entries.
(vex_len_table): Update VEX_LEN_0F10_P_1, VEX_LEN_0F10_P_3,
VEX_LEN_0F11_P_1, VEX_LEN_0F11_P_3, VEX_LEN_0F2E_P_0,
VEX_LEN_0F2E_P_2, VEX_LEN_0F2F_P_0, VEX_LEN_0F2F_P_2,
VEX_LEN_0F51_P_1, VEX_LEN_0F51_P_3, VEX_LEN_0F52_P_1,
VEX_LEN_0F53_P_1, VEX_LEN_0F58_P_1, VEX_LEN_0F58_P_3,
VEX_LEN_0F59_P_1, VEX_LEN_0F59_P_3, VEX_LEN_0F5A_P_1,
VEX_LEN_0F5A_P_3, VEX_LEN_0F5C_P_1, VEX_LEN_0F5C_P_3,
VEX_LEN_0F5D_P_1, VEX_LEN_0F5D_P_3, VEX_LEN_0F5E_P_1,
VEX_LEN_0F5E_P_3, VEX_LEN_0F5F_P_1, VEX_LEN_0F5F_P_3,
VEX_LEN_0FC2_P_1, VEX_LEN_0FC2_P_3, VEX_LEN_0F3A0A_P_2 and
VEX_LEN_0F3A0B_P_2 entries.
(vex_w_table): Remove VEX_W_0F10_P_0, VEX_W_0F10_P_1,
VEX_W_0F10_P_2, VEX_W_0F10_P_3, VEX_W_0F11_P_0, VEX_W_0F11_P_1,
VEX_W_0F11_P_2, VEX_W_0F11_P_3, VEX_W_0F12_P_0_M_0,
VEX_W_0F12_P_0_M_1, VEX_W_0F12_P_1, VEX_W_0F12_P_2,
VEX_W_0F12_P_3, VEX_W_0F13_M_0, VEX_W_0F14, VEX_W_0F15,
VEX_W_0F16_P_0_M_0, VEX_W_0F16_P_0_M_1, VEX_W_0F16_P_1,
VEX_W_0F16_P_2, VEX_W_0F17_M_0, VEX_W_0F28, VEX_W_0F29,
VEX_W_0F2B_M_0, VEX_W_0F2E_P_0, VEX_W_0F2E_P_2, VEX_W_0F2F_P_0,
VEX_W_0F2F_P_2, VEX_W_0F50_M_0, VEX_W_0F51_P_0, VEX_W_0F51_P_1,
VEX_W_0F51_P_2, VEX_W_0F51_P_3, VEX_W_0F52_P_0, VEX_W_0F52_P_1,
VEX_W_0F53_P_0, VEX_W_0F53_P_1, VEX_W_0F58_P_0, VEX_W_0F58_P_1,
VEX_W_0F58_P_2, VEX_W_0F58_P_3, VEX_W_0F59_P_0, VEX_W_0F59_P_1,
VEX_W_0F59_P_2, VEX_W_0F59_P_3, VEX_W_0F5A_P_0, VEX_W_0F5A_P_1,
VEX_W_0F5A_P_3, VEX_W_0F5B_P_0, VEX_W_0F5B_P_1, VEX_W_0F5B_P_2,
VEX_W_0F5C_P_0, VEX_W_0F5C_P_1, VEX_W_0F5C_P_2, VEX_W_0F5C_P_3,
VEX_W_0F5D_P_0, VEX_W_0F5D_P_1, VEX_W_0F5D_P_2, VEX_W_0F5D_P_3,
VEX_W_0F5E_P_0, VEX_W_0F5E_P_1, VEX_W_0F5E_P_2, VEX_W_0F5E_P_3,
VEX_W_0F5F_P_0, VEX_W_0F5F_P_1, VEX_W_0F5F_P_2, VEX_W_0F5F_P_3,
VEX_W_0F60_P_2, VEX_W_0F61_P_2, VEX_W_0F62_P_2, VEX_W_0F63_P_2,
VEX_W_0F64_P_2, VEX_W_0F65_P_2, VEX_W_0F66_P_2, VEX_W_0F67_P_2,
VEX_W_0F68_P_2, VEX_W_0F69_P_2, VEX_W_0F6A_P_2, VEX_W_0F6B_P_2,
VEX_W_0F6C_P_2, VEX_W_0F6D_P_2, VEX_W_0F6F_P_1, VEX_W_0F6F_P_2,
VEX_W_0F70_P_1, VEX_W_0F70_P_2, VEX_W_0F70_P_3,
VEX_W_0F71_R_2_P_2, VEX_W_0F71_R_4_P_2, VEX_W_0F71_R_6_P_2,
VEX_W_0F72_R_2_P_2, VEX_W_0F72_R_4_P_2, VEX_W_0F72_R_6_P_2,
VEX_W_0F73_R_2_P_2, VEX_W_0F73_R_3_P_2, VEX_W_0F73_R_6_P_2,
VEX_W_0F73_R_7_P_2, VEX_W_0F74_P_2, VEX_W_0F75_P_2,
VEX_W_0F76_P_2, VEX_W_0F77_P_0, VEX_W_0F7C_P_2, VEX_W_0F7C_P_3,
VEX_W_0F7D_P_2, VEX_W_0F7D_P_3, VEX_W_0F7E_P_1, VEX_W_0F7F_P_1,
VEX_W_0F7F_P_2, VEX_W_0FAE_R_2_M_0, VEX_W_0FAE_R_3_M_0,
VEX_W_0FC2_P_0, VEX_W_0FC2_P_1, VEX_W_0FC2_P_2, VEX_W_0FC2_P_3,
VEX_W_0FD0_P_2, VEX_W_0FD0_P_3, VEX_W_0FD1_P_2, VEX_W_0FD2_P_2,
VEX_W_0FD3_P_2, VEX_W_0FD4_P_2, VEX_W_0FD5_P_2, VEX_W_0FD6_P_2,
VEX_W_0FD7_P_2_M_1, VEX_W_0FD8_P_2, VEX_W_0FD9_P_2,
VEX_W_0FDA_P_2, VEX_W_0FDB_P_2, VEX_W_0FDC_P_2, VEX_W_0FDD_P_2,
VEX_W_0FDE_P_2, VEX_W_0FDF_P_2, VEX_W_0FE0_P_2, VEX_W_0FE1_P_2,
VEX_W_0FE2_P_2, VEX_W_0FE3_P_2, VEX_W_0FE4_P_2, VEX_W_0FE5_P_2,
VEX_W_0FE6_P_1, VEX_W_0FE6_P_2, VEX_W_0FE6_P_3,
VEX_W_0FE7_P_2_M_0, VEX_W_0FE8_P_2, VEX_W_0FE9_P_2,
VEX_W_0FEA_P_2, VEX_W_0FEB_P_2, VEX_W_0FEC_P_2, VEX_W_0FED_P_2,
VEX_W_0FEE_P_2, VEX_W_0FEF_P_2, VEX_W_0FF0_P_3_M_0,
VEX_W_0FF1_P_2, VEX_W_0FF2_P_2, VEX_W_0FF3_P_2, VEX_W_0FF4_P_2,
VEX_W_0FF5_P_2, VEX_W_0FF6_P_2, VEX_W_0FF7_P_2, VEX_W_0FF8_P_2,
VEX_W_0FF9_P_2, VEX_W_0FFA_P_2, VEX_W_0FFB_P_2, VEX_W_0FFC_P_2,
VEX_W_0FFD_P_2, VEX_W_0FFE_P_2, VEX_W_0F3800_P_2,
VEX_W_0F3801_P_2, VEX_W_0F3802_P_2, VEX_W_0F3803_P_2,
VEX_W_0F3804_P_2, VEX_W_0F3805_P_2, VEX_W_0F3806_P_2,
VEX_W_0F3807_P_2, VEX_W_0F3808_P_2, VEX_W_0F3809_P_2,
VEX_W_0F380A_P_2, VEX_W_0F380B_P_2, VEX_W_0F3817_P_2,
VEX_W_0F381C_P_2, VEX_W_0F381D_P_2, VEX_W_0F381E_P_2,
VEX_W_0F3820_P_2, VEX_W_0F3821_P_2, VEX_W_0F3822_P_2,
VEX_W_0F3823_P_2, VEX_W_0F3824_P_2, VEX_W_0F3825_P_2,
VEX_W_0F3828_P_2, VEX_W_0F3829_P_2, VEX_W_0F382A_P_2_M_0,
VEX_W_0F382B_P_2, VEX_W_0F3830_P_2, VEX_W_0F3831_P_2,
VEX_W_0F3832_P_2, VEX_W_0F3833_P_2, VEX_W_0F3834_P_2,
VEX_W_0F3835_P_2, VEX_W_0F3837_P_2, VEX_W_0F3838_P_2,
VEX_W_0F3839_P_2, VEX_W_0F383A_P_2, VEX_W_0F383B_P_2,
VEX_W_0F383C_P_2, VEX_W_0F383D_P_2, VEX_W_0F383E_P_2,
VEX_W_0F383F_P_2, VEX_W_0F3840_P_2, VEX_W_0F3841_P_2,
VEX_W_0F38DB_P_2, VEX_W_0F3A08_P_2, VEX_W_0F3A09_P_2,
VEX_W_0F3A0A_P_2, VEX_W_0F3A0B_P_2, VEX_W_0F3A0C_P_2,
VEX_W_0F3A0D_P_2, VEX_W_0F3A0E_P_2, VEX_W_0F3A0F_P_2,
VEX_W_0F3A21_P_2, VEX_W_0F3A40_P_2, VEX_W_0F3A41_P_2,
VEX_W_0F3A42_P_2, VEX_W_0F3A62_P_2, VEX_W_0F3A63_P_2 and
VEX_W_0F3ADF_P_2 entries.
(mod_table): Update MOD_VEX_0F2B, MOD_VEX_0F50,
MOD_VEX_0FD7_PREFIX_2, MOD_VEX_0FE7_PREFIX_2,
MOD_VEX_0FF0_PREFIX_3 and MOD_VEX_0F382A_PREFIX_2 entries.
2018-09-17 H.J. Lu <
[email protected]>
* i386-opc.tbl (VexWIG): New.
Replace VexW=3 with VexWIG.
2018-09-15 H.J. Lu <
[email protected]>
* i386-opc.tbl: Set VexW=3 on AVX vrsqrtss.
* i386-tbl.h: Regenerated.
2018-09-15 H.J. Lu <
[email protected]>
PR gas/23665
* i386-dis.c (vex_len_table): Update VEX_LEN_0F7E_P_1 and
VEX_LEN_0FD6_P_2 entries.
* i386-opc.tbl: Set Vex=1 on VEX.128 only vmovq.
* i386-tbl.h: Regenerated.
2018-09-14 H.J. Lu <
[email protected]>
PR gas/23642
* i386-opc.h (VEXWIG): New.
* i386-opc.tbl: Set VexW=3 on VEX/EVEX WIG instructions.
* i386-tbl.h: Regenerated.
2018-09-14 H.J. Lu <
[email protected]>
PR binutils/23655
* i386-dis-evex.h: Replace EXxEVexR with EXxEVexR64 for
vcvtsi2sd%LQ and vcvtusi2sd%LQ.
* i386-dis.c (EXxEVexR64): New.
(evex_rounding_64_mode): Likewise.
(OP_Rounding): Handle evex_rounding_64_mode.
2018-09-14 H.J. Lu <
[email protected]>
PR binutils/23655
* i386-dis-evex.h (evex_table): Replace Eq with Edqa for
vcvtsi2ss%LQ, vcvtsi2sd%LQ, vcvtusi2ss%LQ and vcvtusi2sd%LQ.
* i386-dis.c (Edqa): New.
(dqa_mode): Likewise.
(intel_operand_size): Handle dqa_mode as m_mode.
(OP_E_register): Handle dqa_mode as dq_mode.
(OP_E_memory): Set shift for dqa_mode based on address_mode.
2018-09-14 H.J. Lu <
[email protected]>
* i386-dis.c (OP_E_memory): Reformat.
2018-09-14 Jan Beulich <
[email protected]>
* i386-opc.tbl (crc32): Fold byte and word forms.
* i386-tbl.h: Re-generate.
2018-09-13 H.J. Lu <
[email protected]>
* i386-opc.tbl: Add VexW=1 to VEX.W0 VEX movd, cvtsi2ss, cvtsi2sd,
pextrd, pinsrd, vcvtsi2sd, vcvtsi2ss, vmovd, vpextrd and vpinsrd.
Add VexW=2 to VEX.W1 VEX movq, pextrq, pinsrq, vmovq, vpextrq and
vpinsrq. Remove VexW=1 from WIG VEX movq and vmovq.
* i386-tbl.h: Regenerated.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl (mov, movq, movdir64b): Drop IgnoreSize where
meaningless.
(invept, invvpid, vcvtph2ps, vcvtps2ph, bndmov, xrstors,
xrstors64, xsaves, xsaves64, xsavec, xsavec64, rdpid, incsspq,
rdsspq, saveprevssp, setssbsy, endbr32, endbr64): Drop IgnoreSize.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512_4FMAPS and
AVX512_4VNNIW insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512DQ insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512BW insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512VL insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512ER insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX512F insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SHA insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from XOP and SSE4a insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX2 insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AVX insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from GNFI insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from PCLMUL/VPCLMUL insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from AES/VAES insns.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSE4.2 insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSE4.1 insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSSE3 insns where
meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSE3 insns where meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSE2 insns where meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop IgnoreSize from SSE insns where meaningless.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl (crc32, incsspq, rdsspq): Drop Rex64.
(vpbroadcastw, rdpid): Drop NoRex64.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl (vmovsd, vmovss): Fold register form load and
store templates, adding D.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-opc.tbl (bndmov, kmovb, kmovd, kmovq, kmovw, movapd,
movaps, movd, movdqa, movdqu, movhpd, movhps, movlpd, movlps,
movq, movsd, movss, movupd, movups, vmovapd, vmovaps, vmovd,
vmovdqa, vmovdqa32, vmovdqa64, vmovdqu, vmovdqu16, vmovdqu32,
vmovdqu64, vmovdqu8, vmovq, vmovsd, vmovss, vmovupd, vmovups):
Fold load and store templates where possible, adding D. Drop
IgnoreSize where it was pointlessly present. Drop redundant
*word.
* i386-tbl.h: Re-generate.
2018-09-13 Jan Beulich <
[email protected]>
* i386-dis.c (Mv_bnd, v_bndmk_mode): New.
(mod_table): Use Mv_bnd for bndldx, bndstx, and bndmk.
(intel_operand_size): Handle v_bndmk_mode.
(OP_E_memory): Likewise. Produce (bad) when also riprel.
2018-09-08 John Darrington <
[email protected]>
* disassemble.c (ARCH_s12z): Define if ARCH_all.
2018-08-31 Kito Cheng <
[email protected]>
* riscv-opc.c (riscv_opcodes): Fix incorrect subset info for
compressed floating point instructions.
2018-08-30 Kito Cheng <
[email protected]>
* riscv-dis.c (riscv_disassemble_insn): Check XLEN by
riscv_opcode.xlen_requirement.
* riscv-opc.c (riscv_opcodes): Update for struct change.
2018-08-29 Martin Aberg <
[email protected]>
* sparc-opc.c (sparc_opcodes): Add Leon specific partial write
psr (PWRPSR) instruction.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (mips_arch_choices): Add gs264e descriptors.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (mips_arch_choices): Add gs464e descriptors.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep
loongson3a as an alias of gs464 for compatibility.
* mips-opc.c (mips_opcodes): Change Comments.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (parse_mips_ase_option): Handle -M loongson-ext
option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (LEXT2): New macro.
(mips_opcodes): Add cto, ctz, dcto, dctz instructions.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (mips_arch_choices): Add EXT to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-ext option.
(print_mips_disassembler_options): Document -M loongson-ext.
* mips-opc.c (IL3A): Delete.
* mips-opc.c (LEXT): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LEXT for EXT
instructions.
2018-08-29 Chenghua Xu <
[email protected]>
* mips-dis.c (mips_arch_choices): Add CAM to loongson3a
descriptors.
(parse_mips_ase_option): Handle -M loongson-cam option.
(print_mips_disassembler_options): Document -M loongson-cam.
* mips-opc.c (LCAM): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LCAM for CAM
instructions.
2018-08-21 Alan Modra <
[email protected]>
* ppc-dis.c (operand_value_powerpc): Init "invalid".
(skip_optional_operands): Count optional operands, and update
ppc_optional_operand_value call.
* ppc-opc.c (extract_dxdn): Remove ATTRIBUTE_UNUSED from used arg.
(extract_vlensi): Likewise.
(extract_fxm): Return default value for missing optional operand.
(extract_ls, extract_raq, extract_tbr): Likewise.
(insert_sxl, extract_sxl): New functions.
(insert_esync, extract_esync): Remove Power9 handling and simplify.
(powerpc_operands <FXM4, TBR>): Delete PPC_OPERAND_OPTIONAL_VALUE
flag and extra entry.
(powerpc_operands <SXL>): Likewise, and use insert_sxl and
extract_sxl.
2018-08-20 Alan Modra <
[email protected]>
* sh-opc.h (MASK): Simplify.
2018-08-18 John Darrington <
[email protected]>
* s12z-dis.c (bm_decode): Deal with cases where the mode is
BM_RESERVED0 or BM_RESERVED1
(bm_rel_decode, bm_n_bytes): Ditto.
2018-08-18 John Darrington <
[email protected]>
* s12z.h: Delete.
2018-08-14 H.J. Lu <
[email protected]>
* i386-dis.c (OP_E_memory): In 64-bit mode, display eiz for
address with the addr32 prefix and without base nor index
registers.
2018-08-11 H.J. Lu <
[email protected]>
* i386-gen.c (cpu_flag_init): Add CpuCMOV and CpuFXSR to
CPU_I686_FLAGS. Add CPU_CMOV_FLAGS, CPU_FXSR_FLAGS,
CPU_ANY_CMOV_FLAGS and CPU_ANY_FXSR_FLAGS.
(cpu_flags): Add CpuCMOV and CpuFXSR.
* i386-opc.tbl: Replace Cpu686 with CpuFXSR on fxsave, fxsave64,
fxrstor and fxrstor64. Replace Cpu686 with CpuCMOV on cmovCC.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2018-08-06 Claudiu Zissulescu <
[email protected]>
* arc-regs.h: Update auxiliary registers.
2018-08-06 Jan Beulich <
[email protected]>
* i386-opc.h (RegRip, RegEip, RegEiz, RegRiz): Drop defines.
(RegIP, RegIZ): Define.
* i386-reg.tbl: Adjust comments.
(rip): Use Qword instead of BaseIndex. Use RegIP.
(eip): Use Dword instead of BaseIndex. Use RegIP.
(riz): Add Qword. Use RegIZ.
(eiz): Add Dword. Use RegIZ.
* i386-tbl.h: Re-generate.
2018-08-03 Jan Beulich <
[email protected]>
* i386-opc.tbl (pmovsxbw, pmovsxdq, pmovsxwd, pmovzxbw,
pmovzxdq, pmovzxwd, vpmovsxbw, vpmovsxdq, vpmovsxwd, vpmovzxbw,
vpmovzxdq, vpmovzxwd): Remove NoRex64.
* i386-tbl.h: Re-generate.
2018-08-03 Jan Beulich <
[email protected]>
* i386-gen.c (operand_types): Remove Mem field.
* i386-opc.h (union i386_operand_type): Remove mem field.
* i386-init.h, i386-tbl.h: Re-generate.
2018-08-01 Alan Modra <
[email protected]>
* po/POTFILES.in: Regenerate.
2018-07-31 Nick Clifton <
[email protected]>
* po/sv.po: Updated Swedish translation.
2018-07-31 Jan Beulich <
[email protected]>
* i386-opc.tbl (kandnd, kandnq, kxord, kxorq): Add Optimize.
* i386-init.h, i386-tbl.h: Re-generate.
2018-07-31 Jan Beulich <
[email protected]>
* i386-opc.h (ZEROING_MASKING) Rename to ...
(DYNAMIC_MASKING): ... this. Adjust comment.
* i386-opc.tbl (MaskingMorZ): Define.
(vcompresspd, vcompressps, vcvtps2ph, vextractf32x4,
vextractf32x8, vextractf64x2, vextractf64x4, vextracti32x4,
vextracti32x8, vextracti64x2, vextracti64x4, vmovapd, vmovaps,
vmovdqa32, vmovdqa64, vmovdqu8, vmovdqu16, vmovdqu32, vmovdqu64,
vmovupd, vmovups, vpcompressb, vpcompressw, vpcompressd,
vpcompressq, vpmovdb, vpmovdw, vpmovqb, vpmovqd, vpmovqw,
vpmovsdb, vpmovsdw, vpmovsqb, vpmovsqd, vpmovsqw, vpmovswb,
vpmovusdb, vpmovusdw, vpmovusqb, vpmovusqd, vpmovusqw,
vpmovuswb, vpmovwb): Fold AVX512 register and memory forms.
2018-07-31 Jan Beulich <
[email protected]>
* i386-opc.tbl: Use element rather than vector size for AVX512*
scatter/gather insns.
* i386-tbl.h: Re-generate.
2018-07-31 Jan Beulich <
[email protected]>
* i386-gen.c (cpu_flag_init): Drop CpuVREX uses.
(cpu_flags): Drop CpuVREX.
* i386-opc.h (CpuVREX): Delete.
(union i386_cpu_flags): Remove cpuvrex.
* i386-init.h, i386-tbl.h: Re-generate.
2018-07-30 Jim Wilson <
[email protected]>
* riscv-dis.c (riscv_disassemble_insn): Set insn_type and data_size
fields.
* riscv-opc.c (riscv_opcodes): Use new INSN_* flags to annotate insns.
2018-07-30 Andrew Jenner <
[email protected]>
* Makefile.am (TARGET_LIBOPCODES_CFILES): Add csky-dis.c.
* Makefile.in: Regenerated.
* configure.ac: Add C-SKY.
* configure: Regenerated.
* csky-dis.c: New file.
* csky-opc.h: New file.
* disassemble.c (ARCH_csky): Define.
(disassembler, disassemble_init_for_target): Add case for ARCH_csky.
* disassemble.h (print_insn_csky, csky_get_disassembler): Declare.
2018-07-27 Alan Modra <
[email protected]>
* ppc-opc.c (insert_sprbat): Correct function parameter and
return type.
(extract_sprbat): Likewise, variable too.
2018-07-26 Alex Chadwick <
[email protected]>
Alan Modra <
[email protected]>
* ppc-dis.c (ppc_opts): Add -mgekko and -mbroadway.
(powerpc_init_dialect): Handle bfd_mach_ppc_750.
* ppc-opc.c (insert_sprbat, extract_sprbat): New functions to
support disjointed BAT.
(powerpc_operands): Allow extra bit in SPRBAT_MASK. Add SPRGQR.
(XSPRGQR_MASK, GEKKO, BROADWAY): Define.
(powerpc_opcodes): Add 750cl extended mnemonics for spr access.
2018-07-25 H.J. Lu <
[email protected]>
Igor Tsimbalist <
[email protected]>
* i386-gen.c (adjust_broadcast_modifier): New function.
(process_i386_opcode_modifier): Add an argument for operands.
Adjust the Broadcast value based on operands.
(output_i386_opcode): Pass operand_types to
process_i386_opcode_modifier.
(process_i386_opcodes): Pass NULL as operands to
process_i386_opcode_modifier.
* i386-opc.h (BYTE_BROADCAST): New.
(WORD_BROADCAST): Likewise.
(DWORD_BROADCAST): Likewise.
(QWORD_BROADCAST): Likewise.
(i386_opcode_modifier): Expand broadcast to 3 bits.
* i386-tbl.h: Regenerated.
2018-07-24 Alan Modra <
[email protected]>
PR 23430
* or1k-desc.h: Regenerate.
2018-07-24 Jan Beulich <
[email protected]>
* i386-dis-evex.h (evex_table): Add %LQ to vcvtsi2ss, vcvtsi2sd,
vcvtusi2ss, and vcvtusi2sd.
* i386-opc.tbl (vcvtsi2sd, vcvtusi2sd, vcvtsi2ss, vcvtusi2ss):
Convert AVX512F variants to distinct CpuNo64 and Cpu64 forms.
* i386-tbl.h: Re-generate.
2018-07-23 Claudiu Zissulescu <
[email protected]>
* arc-opc.c (extract_w6): Fix extending the sign.
2018-07-23 Claudiu Zissulescu <
[email protected]>
* arc-tbl.h (vewt): Allow it for ARC EM family.
2018-07-23 Alan Modra <
[email protected]>
PR 23419
* ppc-opc.c (powerpc_opcodes): Add mtupmc/mfupmc/mfpmc extended
opcode variants for mtspr/mfspr encodings.
2018-07-20 Chenghua Xu <
[email protected]>
Maciej W. Rozycki <
[email protected]>
* mips-dis.c (mips_arch_choices): Add MMI to loongson2f and
loongson3a descriptors.
(parse_mips_ase_option): Handle -M loongson-mmi option.
(print_mips_disassembler_options): Document -M loongson-mmi.
* mips-opc.c (LMMI): New macro.
(mips_opcodes): Replace IL2F|IL3A marking with LMMI for MMI
instructions.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl (vcvtpd2dq, vcvtpd2ps, vcvttpd2dq, vcvtpd2udq,
vcvtqq2ps, vcvtuqq2ps): Fold 128- and 256-bit templates. Drop
IgnoreSize and [XYZ]MMword where applicable.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl (vfpclasspd, vfpclassps): Fold.
(vfpclasspdz, vfpclasspsz): Drop IgnoreSize and ZmmWord.
(vfpclasspdx, vfpclasspsx): Drop IgnoreSize and XmmWord.
(vfpclasspdy, vfpclasspsy): Drop IgnoreSize and YmmWord.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl: Fold AVX512IFMA, AVX512VBMI, AVX512_VPOPCNTDQ,
AVX512_VBMI2, AVX512_VNNI, AVX512_BITALG, GFNI, VAES, and
VPCLMULQDQ templates into their respective AVX512VL counterparts
where possible, using Disp8ShiftVL and CheckRegSize instead of
Evex= plus Disp8MemShift= (plus often IgnoreSize) as appropriate.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl: Fold AVX512DQ templates into their respective
AVX512VL counterparts where possible, using Disp8ShiftVL and
CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
IgnoreSize) as appropriate.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl: Fold AVX512BW templates into their respective
AVX512VL counterparts where possible, using Disp8ShiftVL and
CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
IgnoreSize) as appropriate.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.tbl: Fold AVX512CD templates into their respective
AVX512VL counterparts where possible, using Disp8ShiftVL and
CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
IgnoreSize) as appropriate.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* i386-opc.h (DISP8_SHIFT_VL): New.
* i386-opc.tbl (Disp8ShiftVL): Define.
(various): Fold AVX512VL templates into their respective
AVX512F counterparts where possible, using Disp8ShiftVL and
CheckRegSize instead of Evex= plus Disp8MemShift= (plus often
IgnoreSize) as appropriate.
* i386-tbl.h: Re-generate.
2018-07-19 Jan Beulich <
[email protected]>
* Makefile.am: Change dependencies and rule for
$(srcdir)/i386-init.h.
* Makefile.in: Re-generate.
* i386-gen.c (process_i386_opcodes): New local variable
"marker". Drop opening of input file. Recognize marker and line
number directives.
* i386-opc.tbl (OPCODE_I386_H): Define.
(i386-opc.h): Include it.
(None): Undefine.
2018-07-18 H.J. Lu <
[email protected]>
PR gas/23418
* i386-opc.h (Byte): Update comments.
(Word): Likewise.
(Dword): Likewise.
(Fword): Likewise.
(Qword): Likewise.
(Tbyte): Likewise.
(Xmmword): Likewise.
(Ymmword): Likewise.
(Zmmword): Likewise.
* i386-opc.tbl: Split vcvtps2qq, vcvtps2uqq, vcvttps2qq and
vcvttps2uqq.
* i386-tbl.h: Regenerated.
2018-07-12 Sudakshina Das <
[email protected]>
* aarch64-tbl.h (aarch64_opcode_table): Add entry for
ssbb and pssbb and update dsb flags to F_HAS_ALIAS.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-07-12 Tamar Christina <
[email protected]>
PR binutils/23192
* aarch64-tbl.h (sqdmlal, sqdmlal2, smlsl, smlsl2, sqdmlsl, sqdmlsl2,
mul, smull, smull2, sqdmull, sqdmull2, sqdmulh, sqrdmulh, mla, umlal,
umlal2, mls, umlsl, umlsl2, umull, umull2, sqdmlal, sqdmlsl, sqdmull,
sqdmulh, sqrdmulh): Use Em16.
2018-07-11 Sudakshina Das <
[email protected]>
* arm-dis.c (arm_opcodes): Add ssbb and pssbb and move
csdb together with them.
(thumb32_opcodes): Likewise.
2018-07-11 Jan Beulich <
[email protected]>
* i386-opc.tbl (monitor, monitorx): Add 64-bit template
requiring 32-bit registers as operands 2 and 3. Improve
comments.
(mwait, mwaitx): Fold templates. Improve comments.
OPERAND_TYPE_INOUTPORTREG.
* i386-tbl.h: Re-generate.
2018-07-11 Jan Beulich <
[email protected]>
* i386-gen.c (operand_type_init): Remove
OPERAND_TYPE_REG16_INOUTPORTREG entry and one instance of
OPERAND_TYPE_INOUTPORTREG.
* i386-init.h: Re-generate.
2018-07-11 Jan Beulich <
[email protected]>
* i386-opc.tbl (wrssd, wrussd): Add Dword.
(wrssq, wrussq): Add Qword.
* i386-tbl.h: Re-generate.
2018-07-11 Jan Beulich <
[email protected]>
* i386-opc.h: Rename OTMax to OTNum.
(OTNumOfUints): Adjust calculation.
(OTUnused): Directly alias to OTNum.
2018-07-09 Maciej W. Rozycki <
[email protected]>
* s12z-dis.c (lea_reg_xys_opr): Rename `reg' local variable to
`reg_xys'.
(lea_reg_xys): Likewise.
(print_insn_loop_primitive): Rename `reg' local variable to
`reg_dxy'.
2018-07-06 Tamar Christina <
[email protected]>
PR binutils/23242
* aarch64-tbl.h (ldarh): Fix disassembly mask.
2018-07-06 Tamar Christina <
[email protected]>
PR binutils/23369
* aarch64-opc.c (aarch64_sys_regs): Make read/write csselr_el1,
vsesr_el2, osdtrrx_el1, osdtrtx_el1, pmsidr_el1.
2018-07-02 Maciej W. Rozycki <
[email protected]>
PR tdep/8282
* mips-dis.c (mips_option_arg_t): New enumeration.
(mips_options): New variable.
(disassembler_options_mips): New function.
(print_mips_disassembler_options): Reimplement in terms of
`disassembler_options_mips'.
* arm-dis.c (disassembler_options_arm): Adapt to using the
`disasm_options_and_args_t' structure.
* ppc-dis.c (disassembler_options_powerpc): Likewise.
* s390-dis.c (disassembler_options_s390): Likewise.
2018-07-02 Thomas Preud'homme <
[email protected]>
* testsuite/ld-arm/tls-descrelax-be8.d: Add architecture version in
expected result.
* testsuite/ld-arm/tls-descrelax-v7.d: Likewise.
* testsuite/ld-arm/tls-longplt-lib.d: Likewise.
* testsuite/ld-arm/tls-longplt.d: Likewise.
2018-06-29 Tamar Christina <
[email protected]>
PR binutils/23192
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
* aarch64-opc-2.c: Likewise.
* aarch64-dis.c (aarch64_ext_reglane): Add AARCH64_OPND_Em16 constraint.
* aarch64-opc.c (operand_general_constraint_met_p,
aarch64_print_operand): Likewise.
* aarch64-tbl.h (aarch64_opcode_table): Change Em to Em16 for smlal,
smlal2, fmla, fmls, fmul, fmulx, sqrdmlah, sqrdlsh, fmlal, fmlsl,
fmlal2, fmlsl2.
(AARCH64_OPERANDS): Add Em2.
2018-06-26 Nick Clifton <
[email protected]>
* po/uk.po: Updated Ukranian translation.
* po/de.po: Updated German translation.
* po/pt_BR.po: Updated Brazilian Portuguese translation.
2018-06-26 Nick Clifton <
[email protected]>
* nfp-dis.c: Fix spelling mistake.
2018-06-24 Nick Clifton <
[email protected]>
* configure: Regenerate.
* po/opcodes.pot: Regenerate.
2018-06-24 Nick Clifton <
[email protected]>
2.31 branch created.
2018-06-19 Tamar Christina <
[email protected]>
* aarch64-tbl.h (aarch64_opcode_table): Fix alias flag for negs
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Likewise.
2018-06-21 Maciej W. Rozycki <
[email protected]>
* mips-dis.c (print_mips_disassembler_options): Fix a typo in
`-M ginv' option description.
2018-06-20 Sebastian Huber <
[email protected]>
PR gas/23305
* riscv-opc.c (riscv_opcodes): Use new format specifier 'B' for
la and lla.
2018-06-19 Simon Marchi <
[email protected]>
* Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11.
* configure.ac: Remove AC_PREREQ.
* Makefile.in: Re-generate.
* aclocal.m4: Re-generate.
* configure: Re-generate.
2018-06-14 Faraz Shahbazker <
[email protected]>
* mips-dis.c (mips_arch_choices): Add GINV to mips32r6 and
mips64r6 descriptors.
(parse_mips_ase_option): Handle -Mginv option.
(print_mips_disassembler_options): Document -Mginv.
* mips-opc.c (decode_mips_operand) <+\>: New operand format.
(GINV): New macro.
(mips_opcodes): Define ginvi and ginvt.
2018-06-13 Scott Egerton <
[email protected]>
Faraz Shahbazker <
[email protected]>
* mips-dis.c (mips_arch_choices): Add CRC and CRC64 ASEs.
* mips-opc.c (CRC, CRC64): New macros.
(mips_builtin_opcodes): Define crc32b, crc32h, crc32w,
crc32cb, crc32ch and crc32cw for CRC. Define crc32d and
crc32cd for CRC64.
2018-06-08 Egeyar Bagcioglu <
[email protected]>
PR 20319
* aarch64-tbl.h: Introduce QL_INT2FP_FMOV and QL_FP2INT_FMOV.
(aarch64_opcode_table) : Use QL_INT2FP_FMOV and QL_FP2INT_FMOV.
2018-06-06 Alan Modra <
[email protected]>
* xtensa-dis.c (print_insn_xtensa): Init fmt and valid_insn after
setjmp. Move init for some other vars later too.
2018-06-04 Max Filippov <
[email protected]>
* xtensa-dis.c (bfd.h, elf/xtensa.h): New includes.
(dis_private): Add new fields for property section tracking.
(xtensa_coalesce_insn_tables, xtensa_find_table_entry)
(xtensa_instruction_fits): New functions.
(fetch_data): Bump minimal fetch size to 4.
(print_insn_xtensa): Make struct dis_private static.
Load and prepare property table on section change.
Don't disassemble literals. Don't disassemble instructions that
cross property table boundaries.
2018-06-01 H.J. Lu <
[email protected]>
* configure: Regenerated.
2018-06-01 Jan Beulich <
[email protected]>
* i386-opc.tbl (mov, movq): Fold to/from SReg* forms.
* i386-tbl.h: Re-generate.
2018-06-01 Jan Beulich <
[email protected]>
* i386-opc.tbl (sldt, str): Add NoRex64.
* i386-tbl.h: Re-generate.
2018-06-01 Jan Beulich <
[email protected]>
* i386-opc.tbl (invpcid): Add Oword.
* i386-tbl.h: Re-generate.
2018-06-01 Alan Modra <
[email protected]>
* sysdep.h (_bfd_error_handler): Don't declare.
* msp430-decode.opc: Include bfd.h. Don't include ansidecl.h here.
* rl78-decode.opc: Likewise.
* msp430-decode.c: Regenerate.
* rl78-decode.c: Regenerate.
2018-05-30 Amit Pawar <
[email protected]>
* i386-gen.c (cpu_flag_init): Add CPU_ZNVER2_FLAGS.
* i386-init.h : Regenerated.
2018-05-25 Alan Modra <
[email protected]>
* Makefile.in: Regenerate.
* po/POTFILES.in: Regenerate.
2018-05-21 Peter Bergner <
[email protected]>
* ppc-opc.c (insert_bat, extract_bat, insert_bba, extract_bba,
insert_rbs, extract_rbs, insert_xb6s, extract_xb6s): Delete functions.
(insert_bab, extract_bab, insert_btab, extract_btab,
insert_rsb, extract_rsb, insert_xab6, extract_xab6): New functions.
(BAT, BBA VBA RBS XB6S): Delete macros.
(BTAB, BAB, VAB, RAB, RSB, XAB6): New macros.
(BB, BD, RBX, XC6): Update for new macros.
(powerpc_opcodes) <evmr, evnot, vmr, vnot, crnot, crclr, crset,
crmove, not, not., mr, mr., xxspltd, xxswapd, xvmovsp, xvmovdp,
e_crnot, e_crclr, e_crset, e_crmove>: Likewise.
* ppc-dis.c (print_insn_powerpc): Delete handling of fake operands.
2018-05-18 John Darrington <
[email protected]>
* Makefile.am: Add support for s12z architecture.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* s12z-dis.c: New file.
* s12z.h: New file.
2018-05-18 Alan Modra <
[email protected]>
* nfp-dis.c: Don't #include libbfd.h.
(init_nfp3200_priv): Use bfd_get_section_contents.
(nit_nfp6000_mecsr_sec): Likewise.
2018-05-17 Nick Clifton <
[email protected]>
* po/zh_CN.po: Updated simplified Chinese translation.
2018-05-16 Tamar Christina <
[email protected]>
PR binutils/23109
* aarch64-tbl.h (aarch64_opcode_table): Correct sdot and udot.
* aarch64-dis-2.c: Regenerate.
2018-05-15 Tamar Christina <
[email protected]>
PR binutils/21446
* aarch64-asm.c (opintl.h): Include.
(aarch64_ins_sysreg): Enforce read/write constraints.
* aarch64-dis.c (aarch64_ext_sysreg): Likewise.
* aarch64-opc.h (F_DEPRECATED, F_ARCHEXT, F_HASXT): Moved here.
(F_REG_READ, F_REG_WRITE): New.
* aarch64-opc.c (aarch64_print_operand): Generate notes for
AARCH64_OPND_SYSREG.
(F_DEPRECATED, F_ARCHEXT, F_HASXT): Move to aarch64-opc.h.
(aarch64_sys_regs): Add constraints to currentel, midr_el1, ctr_el0,
mpidr_el1, revidr_el1, aidr_el1, dczid_el0, id_dfr0_el1, id_pfr0_el1,
id_pfr1_el1, id_afr0_el1, id_mmfr0_el1, id_mmfr1_el1, id_mmfr2_el1,
id_mmfr3_el1, id_mmfr4_el1, id_isar0_el1, id_isar1_el1, id_isar2_el1,
id_isar3_el1, id_isar4_el1, id_isar5_el1, mvfr0_el1, mvfr1_el1,
mvfr2_el1, ccsidr_el1, id_aa64pfr0_el1, id_aa64pfr1_el1,
id_aa64dfr0_el1, id_aa64dfr1_el1, id_aa64isar0_el1, id_aa64isar1_el1,
id_aa64mmfr0_el1, id_aa64mmfr1_el1, id_aa64mmfr2_el1, id_aa64afr0_el1,
id_aa64afr0_el1, id_aa64afr1_el1, id_aa64zfr0_el1, clidr_el1,
csselr_el1, vsesr_el2, erridr_el1, erxfr_el1, rvbar_el1, rvbar_el2,
rvbar_el3, isr_el1, tpidrro_el0, cntfrq_el0, cntpct_el0, cntvct_el0,
mdccsr_el0, dbgdtrrx_el0, dbgdtrtx_el0, osdtrrx_el1, osdtrtx_el1,
mdrar_el1, oslar_el1, oslsr_el1, dbgauthstatus_el1, pmbidr_el1,
pmsidr_el1, pmswinc_el0, pmceid0_el0, pmceid1_el0.
* aarch64-tbl.h (aarch64_opcode_table): Add constraints to
msr (F_SYS_WRITE), mrs (F_SYS_READ).
2018-05-15 Tamar Christina <
[email protected]>
PR binutils/21446
* aarch64-dis.c (no_notes: New.
(parse_aarch64_dis_option): Support notes.
(aarch64_decode_insn, print_operands): Likewise.
(print_aarch64_disassembler_options): Document notes.
* aarch64-opc.c (aarch64_print_operand): Support notes.
2018-05-15 Tamar Christina <
[email protected]>
PR binutils/21446
* aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean
and take error struct.
* aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane,
aarch64_ins_reglist, aarch64_ins_ldst_reglist,
aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist,
aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half,
aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm,
aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits,
aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm,
aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple,
aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm,
aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12,
aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg,
aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier,
aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended,
aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl,
aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl,
aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6,
aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw,
aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw,
aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm,
aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov,
aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist,
aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm,
aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two,
aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise.
* aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise.
* aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane,
aarch64_ext_reglist, aarch64_ext_ldst_reglist,
aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist,
aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half,
aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm,
aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits,
aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm,
aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple,
aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm,
aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12,
aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg,
aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier,
aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended,
aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl,
aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl,
aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6,
aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw,
aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz,
aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw,
aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm,
aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov,
aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist,
aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm,
aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two,
aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise.
(determine_disassembling_preference, aarch64_decode_insn,
print_insn_aarch64_word, print_insn_data): Take errors struct.
(print_insn_aarch64): Use errors.
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-gen.c (print_operand_inserter): Use errors and change type to
boolean in aarch64_insert_operan.
(print_operand_extractor): Likewise.
* aarch64-opc.c (aarch64_print_operand): Use sysreg struct.
2018-05-15 Francois H. Theron <
[email protected]>
* nfp-dis.c: Use uint64_t for instruction variables, not bfd_vma.
2018-05-09 H.J. Lu <
[email protected]>
* i386-opc.tbl: Remove Disp<N> from movidir{i,64b}.
2018-05-09 Sebastian Rasmussen <
[email protected]>
* cr16-opc.c (cr16_instruction): Comment typo fix.
* hppa-dis.c (print_insn_hppa): Likewise.
2018-05-08 Jim Wilson <
[email protected]>
* riscv-opc.c (match_c_slli, match_slli_as_c_slli): New.
(match_c_slli64, match_srxi_as_c_srxi): New.
(riscv_opcodes) <slli, sll>: Use match_slli_as_c_slli.
<srli, srl, srai, sra>: Use match_srxi_as_c_srxi.
<c.slli, c.srli, c.srai>: Use match_s_slli.
<c.slli64, c.srli64, c.srai64>: New.
2018-05-08 Alan Modra <
[email protected]>
* ppc-dis.c (PPC_OPCD_SEGS): Define using PPC_OP.
(VLE_OPCD_SEGS, SPE2_OPCD_SEGS): Similarly, using macros used to
partition opcode space for index lookup.
2018-05-07 Peter Bergner <
[email protected]>
* ppc-dis.c (print_insn_powerpc) <insn_is_short>: Replace this...
<insn_length>: ...with this. Update usage.
Remove duplicate call to *info->memory_error_func.
2018-05-07 Igor Tsimbalist <
[email protected]>
H.J. Lu <
[email protected]>
* i386-dis.c (Gva): New.
(enum): Add PREFIX_0F38F8, PREFIX_0F38F9,
MOD_0F38F8_PREFIX_2, MOD_0F38F9_PREFIX_0.
(prefix_table): New instructions (see prefix above).
(mod_table): New instructions (see prefix above).
(OP_G): Handle va_mode.
* i386-gen.c (cpu_flag_init): Add CPU_MOVDIRI_FLAGS,
CPU_MOVDIR64B_FLAGS.
(cpu_flags): Add CpuMOVDIRI and CpuMOVDIR64B.
* i386-opc.h (enum): Add CpuMOVDIRI, CpuMOVDIR64B.
(i386_cpu_flags): Add cpumovdiri and cpumovdir64b.
* i386-opc.tbl: Add movidir{i,64b}.
* i386-init.h: Regenerated.
* i386-tbl.h: Likewise.
2018-05-07 H.J. Lu <
[email protected]>
* i386-gen.c (opcode_modifiers): Replace AddrPrefixOp0 with
AddrPrefixOpReg.
* i386-opc.h (AddrPrefixOp0): Renamed to ...
(AddrPrefixOpReg): This.
(i386_opcode_modifier): Rename addrprefixop0 to addrprefixopreg.
* i386-opc.tbl: Replace AddrPrefixOp0 with AddrPrefixOpReg.
2018-05-07 Peter Bergner <
[email protected]>
* ppc-opc.c (powerpc_num_opcodes): Change type to unsigned.
(vle_num_opcodes): Likewise.
(spe2_num_opcodes): Likewise.
* ppc-dis.c (disassemble_init_powerpc) <powerpc_opcd_indices>: Rewrite
initialization loop.
(disassemble_init_powerpc) <vle_opcd_indices>: Likewise.
(disassemble_init_powerpc) <spe2_opcd_indices>: Likewise. Initialize
only once.
2018-05-01 Tamar Christina <
[email protected]>
* aarch64-dis.c (aarch64_opcode_decode): Moved memory clear code.
2018-04-30 Francois H. Theron <
[email protected]>
Makefile.am: Added nfp-dis.c.
configure.ac: Added bfd_nfp_arch.
disassemble.h: Added print_insn_nfp prototype.
disassemble.c: Added ARCH_nfp and call to print_insn_nfp
nfp-dis.c: New, for NFP support.
po/POTFILES.in: Added nfp-dis.c to the list.
Makefile.in: Regenerate.
configure: Regenerate.
2018-04-26 Jan Beulich <
[email protected]>
* i386-opc.tbl: Fold various non-memory operand AVX512VL
templates into their base ones.
* i386-tlb.h: Re-generate.
2018-04-26 Jan Beulich <
[email protected]>
* i386-gen.c (cpu_flag_init): Use CPU_XOP_FLAGS for
CPU_BDVER1_FLAGS. Use CPU_AVX2_FLAGS for CPU_ZNVER1_FLAGS. Use
CPU_AVX_FLAGS for CPU_BTVER1_FLAGS. Add CPU_XSAVE_FLAGS to
CPU_LWP_FLAGS, CPU_AVX_FLAGS, CPU_MPX_FLAGS, and CPU_OSPKE_FLAGS.
* i386-init.h: Re-generate.
2018-04-26 Jan Beulich <
[email protected]>
* i386-gen.c (cpu_flag_init): Drop all uses of CpuRegMMX,
CpuRegXMM, CpuRegYMM, CpuRegZMM, and CpuRegMask. Use
CPU_AVX2_FLAGS for CPU_AVX512F_FLAGS and drop bogus comment.
Don't use CPU_AVX2_FLAGS for CPU_AVX512VL_FLAGS and drop bogus
comment.
(cpu_flags): Drop CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM,
and CpuRegMask.
* i386-opc.h: CpuRegMMX, CpuRegXMM, CpuRegYMM, CpuRegZMM,
CpuRegMask: Delete.
(union i386_cpu_flags): Remove cpuregmmx, cpuregxmm, cpuregymm,
cpuregzmm, and cpuregmask.
* i386-init.h: Re-generate.
* i386-tbl.h: Re-generate.
2018-04-26 Jan Beulich <
[email protected]>
* i386-gen.c (cpu_flag_init): CPU_I586_FLAGS inherits Cpu387 only.
CPU_287_FLAGS is Cpu287 only. CPU_387_FLAGS is Cpu387 only.
* i386-init.h: Re-generate.
2018-04-26 Jan Beulich <
[email protected]>
* i386-gen.c (VexImmExt): Delete.
* i386-opc.h (VexImmExt, veximmext): Delete.
* i386-opc.tbl: Drop all VexImmExt uses.
* i386-tlb.h: Re-generate.
2018-04-25 Jan Beulich <
[email protected]>
* i386-opc.tbl (vpslld, vpsrad, vpsrld): Drop AVX512VL
register-only forms.
* i386-tlb.h: Re-generate.
2018-04-25 Tamar Christina <
[email protected]>
* aarch64-tbl.h (sqrdmlah, sqrdmlsh): Fix masks.
2018-04-17 Igor Tsimbalist <
[email protected]>
* i386-dis.c: Add REG_0F1C_MOD_0, MOD_0F1C_PREFIX_0,
PREFIX_0F1C.
* i386-gen.c (cpu_flag_init): Add CPU_CLDEMOTE_FLAGS,
(cpu_flags): Add CpuCLDEMOTE.
* i386-init.h: Regenerate.
* i386-opc.h (enum): Add CpuCLDEMOTE,
(i386_cpu_flags): Add cpucldemote.
* i386-opc.tbl: Add cldemote.
* i386-tbl.h: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* Makefile.am: Remove sh5 and sh64 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* sh-dis.c: Likewise.
* sh64-dis.c: Delete.
* sh64-opc.c: Delete.
* sh64-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* Makefile.am: Remove w65 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* w65-dis.c: Delete.
* w65-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* configure.ac: Remove we32k support.
* configure: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* Makefile.am: Remove m88k support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* m88k-dis.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* Makefile.am: Remove i370 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* i370-dis.c: Delete.
* i370-opc.c: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* Makefile.am: Remove h8500 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* h8500-dis.c: Delete.
* h8500-opc.h: Delete.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-16 Alan Modra <
[email protected]>
* configure.ac: Remove tahoe support.
* configure: Regenerate.
2018-04-15 H.J. Lu <
[email protected]>
* i386-dis.c (prefix_table): Replace Em with Edq on tpause and
umwait.
* i386-opc.tbl: Allow 32-bit registers for tpause and umwait in
64-bit mode.
* i386-tbl.h: Regenerated.
2018-04-11 Igor Tsimbalist <
[email protected]>
* i386-dis.c (enum): Add PREFIX_MOD_0_0FAE_REG_6,
PREFIX_MOD_1_0FAE_REG_6.
(va_mode): New.
(OP_E_register): Use va_mode.
* i386-dis-evex.h (prefix_table):
New instructions (see prefixes above).
* i386-gen.c (cpu_flag_init): Add WAITPKG.
(cpu_flags): Likewise.
* i386-opc.h (enum): Likewise.
(i386_cpu_flags): Likewise.
* i386-opc.tbl: Add umonitor, umwait, tpause.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
2018-04-11 Alan Modra <
[email protected]>
* opcodes/i860-dis.c: Delete.
* opcodes/i960-dis.c: Delete.
* Makefile.am: Remove i860 and i960 support.
* configure.ac: Likewise.
* disassemble.c: Likewise.
* disassemble.h: Likewise.
* Makefile.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
2018-04-04 H.J. Lu <
[email protected]>
PR binutils/23025
* i386-dis.c (get_valid_dis386): Don't set vex.prefix nor vex.w
to 0.
(print_insn): Clear vex instead of vex.evex.
2018-04-04 Nick Clifton <
[email protected]>
* po/es.po: Updated Spanish translation.
2018-03-28 Jan Beulich <
[email protected]>
* i386-gen.c (opcode_modifiers): Delete VecESize.
* i386-opc.h (VecESize): Delete.
(struct i386_opcode_modifier): Delete vecesize.
* i386-opc.tbl: Drop VecESize.
* i386-tlb.h: Re-generate.
2018-03-28 Jan Beulich <
[email protected]>
* i386-opc.h (NO_BROADCAST, BROADCAST_1TO16, BROADCAST_1TO8,
BROADCAST_1TO4, BROADCAST_1TO2): Delete.
(struct i386_opcode_modifier): Shrink broadcast field to 1 bit.
* i386-opc.tbl: Replace Broadcast=<N> by Broadcast.
* i386-tlb.h: Re-generate.
2018-03-28 Jan Beulich <
[email protected]>
* i386-opc.tbl (vcvt*d2si, vcvt*d2usi, vcvt*s2si, vcvt*s2usi):
Fold AVX512 forms
* i386-tlb.h: Re-generate.
2018-03-28 Jan Beulich <
[email protected]>
* i386-dis.c (prefix_table): Drop Y for cvt*2si.
(vex_len_table): Drop Y for vcvt*2si.
(putop): Replace plain 'Y' handling by abort().
2018-03-28 Nick Clifton <
[email protected]>
PR 22988
* aarch64-tbl.h (aarch64_opcode_table): Add entries for LDFF1xx
instructions with only a base address register.
* aarch64-opc.c (operand_general_constraint_met_p): Add code to
handle AARHC64_OPND_SVE_ADDR_R.
(aarch64_print_operand): Likewise.
* aarch64-asm-2.c: Regenerate.
* aarch64_dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-03-22 Jan Beulich <
[email protected]>
* i386-opc.tbl: Drop VecESize from register only insn forms and
memory forms not allowing broadcast.
* i386-tlb.h: Re-generate.
2018-03-22 Jan Beulich <
[email protected]>
* i386-opc.tbl (vfrczs*, vphadd*, vphsub*, vpmacs*, vpmadcs*,
vprot*, vpsha*, vpshl*, bextr, blc*, bls*, t1mskc, tzmsk, sha1*,
sha256*): Drop Disp<N>.
2018-03-22 Jan Beulich <
[email protected]>
* i386-dis.c (EbndS, bnd_swap_mode): New.
(prefix_table): Use EbndS.
(OP_E_register, OP_E_memory): Also handle bnd_swap_mode.
* i386-opc.tbl (bndmov): Move misplaced Load.
* i386-tlb.h: Re-generate.
2018-03-22 Jan Beulich <
[email protected]>
* i386-opc.tbl (vcvtdq2pd, vcvtps2pd, vcvtudq2pd): Use separate
templates allowing memory operands and folded ones for register
only flavors.
* i386-tlb.h: Re-generate.
2018-03-22 Jan Beulich <
[email protected]>
* i386-opc.tbl (vfrczp*, vpcmov, vpermil2p*): Fold 128- and
256-bit templates. Drop redundant leftover Disp<N>.
* i386-tlb.h: Re-generate.
2018-03-14 Kito Cheng <
[email protected]>
* riscv-opc.c (riscv_insn_types): New.
2018-03-13 Nick Clifton <
[email protected]>
* po/pt_BR.po: Updated Brazilian Portuguese translation.
2018-03-08 H.J. Lu <
[email protected]>
* i386-opc.tbl: Add Optimize to clr.
* i386-tbl.h: Regenerated.
2018-03-08 H.J. Lu <
[email protected]>
* i386-gen.c (opcode_modifiers): Remove OldGcc.
* i386-opc.h (OldGcc): Removed.
(i386_opcode_modifier): Remove oldgcc.
* i386-opc.tbl: Remove fsubp, fsubrp, fdivp and fdivrp
instructions for old (<= 2.8.1) versions of gcc.
* i386-tbl.h: Regenerated.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.h (EVEXDYN): New.
* i386-opc.tbl: Fold various AVX512VL templates.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vexpandpd, vexpandps, vmovapd, vmovaps,
vmovdqa32, vmovdqa64, vmovdqu32, vmovdqu64, vmovupd, vmovups,
vpexpandd, vpexpandq): Fold AFX512VF templates.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vgf2p8affineinvqb, vgf2p8affineqb, vgf2p8mulb):
Fold 128- and 256-bit VEX-encoded templates.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vexpandpd, vexpandps, vmovapd, vmovaps,
vmovdqa32, vmovdqa64, vmovdqu32, vmovdqu64, vmovupd, vmovups,
vpexpandd, vpexpandq): Fold AVX512F templates.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (llwpcb, slwpcb, lwpval, lwpins): Fold 32- and
64-bit templates. Drop Disp<N>.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vfmadd*, vfmsub*, vfnmadd*, vfnmsub*): Fold 128-
and 256-bit templates.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (cmpxchg8b): Add NoRex64.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (cmpxchg16b, fisttp, fisttpll, bndmov, mwaitx):
Drop NoAVX.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (ldmxcsr, stmxcsr): Add NoAVX.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-gen.c (opcode_modifiers): Delete FloatD.
* i386-opc.h (FloatD): Delete.
(struct i386_opcode_modifier): Delete floatd.
* i386-opc.tbl (fadd, fsub, fsubr, fmul, fdiv, fdivr): Replace
FloatD by D.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-dis.c (float_reg): Adjust DC and DE fsub*/fdiv* patterns.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vmovd): Disallow Qword memory operands.
* i386-tlb.h: Re-generate.
2018-03-08 Jan Beulich <
[email protected]>
* i386-opc.tbl (vcvtpd2ps): Fold AVX 128- and 256-bit memory
forms.
* i386-tlb.h: Re-generate.
2018-03-07 Alan Modra <
[email protected]>
* disassemble.c (disassembler): Use bfd_arch_powerpc entry for
bfd_arch_rs6000.
* disassemble.h (print_insn_rs6000): Delete.
* ppc-dis.c (powerpc_init_dialect): Handle rs6000.
(disassemble_init_powerpc): Call powerpc_init_dialect for rs6000.
(print_insn_rs6000): Delete.
2018-03-03 Alan Modra <
[email protected]>
* sysdep.h (opcodes_error_handler): Define.
(_bfd_error_handler): Declare.
* Makefile.am: Remove stray #.
* opc2c.c (main): Remove bogus -l arg handling. Print "DO NOT
EDIT" comment.
* aarch64-dis.c, * arc-dis.c, * arm-dis.c, * avr-dis.c,
* d30v-dis.c, * h8300-dis.c, * mmix-dis.c, * ppc-dis.c,
* riscv-dis.c, * s390-dis.c, * sparc-dis.c, * v850-dis.c: Use
opcodes_error_handler to print errors. Standardize error messages.
* msp430-decode.opc, * nios2-dis.c, * rl78-decode.opc: Likewise,
and include opintl.h.
* nds32-asm.c: Likewise, and include sysdep.h and opintl.h.
* i386-gen.c: Standardize error messages.
* msp430-decode.c, * rl78-decode.c, rx-decode.c: Regenerate.
* Makefile.in: Regenerate.
* epiphany-asm.c, * epiphany-desc.c, * epiphany-dis.c,
* epiphany-ibld.c, * fr30-asm.c, * fr30-desc.c, * fr30-dis.c,
* fr30-ibld.c, * frv-asm.c, * frv-desc.c, * frv-dis.c, * frv-ibld.c,
* frv-opc.c, * ip2k-asm.c, * ip2k-desc.c, * ip2k-dis.c, * ip2k-ibld.c,
* iq2000-asm.c, * iq2000-desc.c, * iq2000-dis.c, * iq2000-ibld.c,
* lm32-asm.c, * lm32-desc.c, * lm32-dis.c, * lm32-ibld.c,
* m32c-asm.c, * m32c-desc.c, * m32c-dis.c, * m32c-ibld.c,
* m32r-asm.c, * m32r-desc.c, * m32r-dis.c, * m32r-ibld.c,
* mep-asm.c, * mep-desc.c, * mep-dis.c, * mep-ibld.c, * mt-asm.c,
* mt-desc.c, * mt-dis.c, * mt-ibld.c, * or1k-asm.c, * or1k-desc.c,
* or1k-dis.c, * or1k-ibld.c, * xc16x-asm.c, * xc16x-desc.c,
* xc16x-dis.c, * xc16x-ibld.c, * xstormy16-asm.c, * xstormy16-desc.c,
* xstormy16-dis.c, * xstormy16-ibld.c: Regenerate.
2018-03-01 H.J. Lu <
[email protected]>
* * i386-opc.tbl: Add "Optimize" to AVX256 and AVX512
vpsub[bwdq] instructions.
* i386-tbl.h: Regenerated.
2018-03-01 Alan Modra <
[email protected]>
* configure.ac (ALL_LINGUAS): Sort.
* configure: Regenerate.
2018-02-27 Thomas Preud'homme <
[email protected]>
* arm-dis.c (print_insn_coprocessor): Replace uses of ARM_FEATURE_COPY
macro by assignements.
2018-02-27 H.J. Lu <
[email protected]>
PR gas/22871
* i386-gen.c (opcode_modifiers): Add Optimize.
* i386-opc.h (Optimize): New enum.
(i386_opcode_modifier): Add optimize.
* i386-opc.tbl: Add "Optimize" to "mov $imm, reg",
"sub reg, reg/mem", "test $imm, acc", "test $imm, reg/mem",
"and $imm, acc", "and $imm, reg/mem", "xor reg, reg/mem",
"movq $imm, reg" and AVX256 and AVX512 versions of vandnps,
vandnpd, vpandn, vpandnd, vpandnq, vxorps, vxorpd, vpxor,
vpxord and vpxorq.
* i386-tbl.h: Regenerated.
2018-02-26 Alan Modra <
[email protected]>
* crx-dis.c (getregliststring): Allocate a large enough buffer
to silence false positive gcc8 warning.
2018-02-22 Shea Levy <
[email protected]>
* disassemble.c (ARCH_riscv): Define if ARCH_all.
2018-02-22 H.J. Lu <
[email protected]>
* i386-opc.tbl: Add {rex},
* i386-tbl.h: Regenerated.
2018-02-20 Maciej W. Rozycki <
[email protected]>
* mips16-opc.c (decode_mips16_operand) <'M'>: Remove case.
(mips16_opcodes): Replace `M' with `m' for "restore".
2018-02-19 Thomas Preud'homme <
[email protected]>
* arm-dis.c (thumb_opcodes): Fix BXNS mask.
2018-02-13 Maciej W. Rozycki <
[email protected]>
* wasm32-dis.c (print_insn_wasm32): Rename `index' local
variable to `function_index'.
2018-02-13 Nick Clifton <
[email protected]>
PR 22823
* metag-dis.c (print_fmmov): Double buffer size to avoid warning
about truncation of printing.
2018-02-12 Henry Wong <
[email protected]>
* mips-opc.c (mips_builtin_opcodes): Correct "sigrie" encoding.
2018-02-05 Nick Clifton <
[email protected]>
* po/pt_BR.po: Updated Brazilian Portuguese translation.
2018-01-23 Igor Tsimbalist <
[email protected]>
* i386-dis.c (enum): Add pconfig.
* i386-gen.c (cpu_flag_init): Add CPU_PCONFIG_FLAGS.
(cpu_flags): Add CpuPCONFIG.
* i386-opc.h (enum): Add CpuPCONFIG.
(i386_cpu_flags): Add cpupconfig.
* i386-opc.tbl: Add PCONFIG instruction.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
2018-01-23 Igor Tsimbalist <
[email protected]>
* i386-dis.c (enum): Add PREFIX_0F09.
* i386-gen.c (cpu_flag_init): Add CPU_WBNOINVD_FLAGS.
(cpu_flags): Add CpuWBNOINVD.
* i386-opc.h (enum): Add CpuWBNOINVD.
(i386_cpu_flags): Add cpuwbnoinvd.
* i386-opc.tbl: Add WBNOINVD instruction.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
2018-01-17 Jim Wilson <
[email protected]>
* riscv-opc.c (riscv_opcodes) <addi>: Use z instead of 0.
2018-01-17 Igor Tsimbalist <
[email protected]>
* i386-gen.c (cpu_flag_init): Delete CPU_CET_FLAGS, CpuCET.
Add CPU_IBT_FLAGS, CPU_SHSTK_FLAGS, CPY_ANY_IBT_FLAGS,
CPU_ANY_SHSTK_FLAGS, CpuIBT, CpuSHSTK.
(cpu_flags): Add CpuIBT, CpuSHSTK.
* i386-opc.h (enum): Add CpuIBT, CpuSHSTK.
(i386_cpu_flags): Add cpuibt, cpushstk.
* i386-opc.tbl: Change CpuCET to CpuSHSTK and CpuIBT.
* i386-init.h: Regenerate.
* i386-tbl.h: Likewise.
2018-01-16 Nick Clifton <
[email protected]>
* po/pt_BR.po: Updated Brazilian Portugese translation.
* po/de.po: Updated German translation.
2018-01-15 Jim Wilson <
[email protected]>
* riscv-opc.c (match_c_nop): New.
(riscv_opcodes) <addi>: Handle an addi that compresses to c.nop.
2018-01-15 Nick Clifton <
[email protected]>
* po/uk.po: Updated Ukranian translation.
2018-01-13 Nick Clifton <
[email protected]>
* po/opcodes.pot: Regenerated.
2018-01-13 Nick Clifton <
[email protected]>
* configure: Regenerate.
2018-01-13 Nick Clifton <
[email protected]>
2.30 branch created.
2018-01-11 Igor Tsimbalist <
[email protected]>
* i386-opc.tbl: Remove VL variants for 4FMAPS and 4VNNIW insns.
* i386-tbl.h: Regenerate.
2018-01-10 Jan Beulich <
[email protected]>
* i386-opc.tbl (v4fmaddss, v4fnmaddss): Adjust Disp8MemShift.
* i386-tbl.h: Re-generate.
2018-01-10 Jan Beulich <
[email protected]>
* i386-opc.tbl (vpcmpeqb, vpcmpleb, vpcmpltb, vpcmpneqb,
vpcmpnleb, vpcmpnltb, vpcmpequb, vpcmpleub, vpcmpltub,
vpcmpnequb, vpcmpnleub, vpcmpnltub, vpcmpeqw, vpcmplew,
vpcmpltw, vpcmpneqw, vpcmpnlew, vpcmpnltw, vpcmpequw, vpcmpleuw,
vpcmpltuw, vpcmpnequw, vpcmpnleuw, vpcmpnltuw): Adjust
Disp8MemShift of AVX512VL forms.
* i386-tbl.h: Re-generate.
2018-01-09 Jim Wilson <
[email protected]>
* riscv-dis.c (maybe_print_address): If base_reg is zero,
then the hi_addr value is zero.
2018-01-09 James Greenhalgh <
[email protected]>
* arm-dis.c (arm_opcodes): Add csdb.
(thumb32_opcodes): Add csdb.
2018-01-09 James Greenhalgh <
[email protected]>
* aarch64-tbl.h (aarch64_opcode_table): Add "csdb".
* aarch64-asm-2.c: Regenerate.
* aarch64-dis-2.c: Regenerate.
* aarch64-opc-2.c: Regenerate.
2018-01-08 H.J. Lu <
[email protected]>
PR gas/22681
* i386-opc.tbl: Properly encode vmovd with Qword memeory operand.
Remove AVX512 vmovd with 64-bit operands.
* i386-tbl.h: Regenerated.
2018-01-05 Jim Wilson <
[email protected]>
* riscv-dis.c (print_insn_args) <'s'>: Call maybe_print_address for a
jalr.
2018-01-03 Alan Modra <
[email protected]>
Update year range in copyright notice of all files.
2018-01-02 Jan Beulich <
[email protected]>
* i386-gen.c (operand_type_init): Restore OPERAND_TYPE_REGYMM
and OPERAND_TYPE_REGZMM entries.
For older changes see ChangeLog-2017
Copyright (C) 2018 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.
Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End:
