2004-12-23 Tomer Levi <Tomer.Levi@nsc.com>

2004-12-23 Tomer Levi <[email protected]>

* crx-opc.c: Mark 'bcop' instruction as RELAXABLE.

2004-12-14 Svein E. Seldal <[email protected]>

* avr-dis.c: Prettyprint. Added printing of symbol names in all
memory references. Convert avr_operand() to C90 formatting.

2004-12-05 Tomer Levi <[email protected]>

* crx-dis.c (print_arg): Use 'info->print_address_func' for address printing.

2004-11-29 Tomer Levi <[email protected]>

* crx-opc.c (crx_optab): Mark all rbase_disps* operands as signed.
(no_op_insn): Initialize array with instructions that have no
operands.
* crx-dis.c (make_instruction): Get rid of COP_BRANCH_INS operand swapping.

2004-11-29 Richard Earnshaw <[email protected]>

* arm-dis.c: Correct top-level comment.

2004-11-27 Richard Earnshaw <[email protected]>

* arm-opc.h (arm_opcode, thumb_opcode): Add extra field for the
architecuture defining the insn.
(arm_opcodes, thumb_opcodes): Delete. Move to ...
* arm-dis.c (arm_opcodes, thumb_opcodes): Here. Add architecutre
field.
Also include opcode/arm.h.
* Makefile.am (arm-dis.lo): Update dependency list.
* Makefile.in: Regenerate.

2004-11-22 Ravi Ramaseshan <[email protected]>

* opcode/arc-opc.c (insert_base): Modify ls_operand[LS_OFFSET] to
reflect the change to the short immediate syntax.

2004-11-19 Alan Modra <[email protected]>

* or32-opc.c (debug): Warning fix.
* po/POTFILES.in: Regenerate.

* maxq-dis.c: Formatting.
(print_insn): Warning fix.

2004-11-17 Daniel Jacobowitz <[email protected]>

* arm-dis.c (WORD_ADDRESS): Define.
(print_insn): Use it. Correct big-endian end-of-section handling.

2004-11-08 Inderpreet Singh <[email protected]>
Vineet Sharma <[email protected]>

* maxq-dis.c: New file.
* disassemble.c (ARCH_maxq): Define.
(disassembler): Add 'print_insn_maxq_little' for handling maxq
instructions..
* configure.in: Add case for bfd_maxq_arch.
* configure: Regenerate.
* Makefile.am: Add support for maxq-dis.c
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.

2004-11-05 Tomer Levi <[email protected]>

* crx-opc.c (crx_optab): Rename 'arg_icr' to 'arg_idxr' for Index register
mode.
* crx-dis.c: Likewise.

2004-11-04 Hans-Peter Nilsson <[email protected]>

Generally, handle CRISv32.
* cris-dis.c (TRACE_CASE): Define as (disdata->trace_case).
(struct cris_disasm_data): New type.
(format_reg, format_hex, cris_constraint, print_flags)
(get_opcode_entry): Add struct cris_disasm_data * parameter. All
callers changed.
(format_sup_reg, print_insn_crisv32_with_register_prefix)
(print_insn_crisv32_without_register_prefix)
(print_insn_crisv10_v32_with_register_prefix)
(print_insn_crisv10_v32_without_register_prefix)
(cris_parse_disassembler_options): New functions.
(bytes_to_skip, cris_spec_reg): Add enum cris_disass_family
parameter. All callers changed.
(get_opcode_entry): Call malloc, not xmalloc. Return NULL on
failure.
(cris_constraint) <case 'Y', 'U'>: New cases.
(bytes_to_skip): Handle 'Y' and 'N' as 's'. Skip size is 4 bytes
for constraint 'n'.
(print_with_operands) <case 'Y'>: New case.
(print_with_operands) <case 'T', 'A', '[', ']', 'd', 'n', 'u'>
<case 'N', 'Y', 'Q'>: New cases.
(print_insn_cris_generic): Emit "bcc ." for zero and CRISv32.
(print_insn_cris_with_register_prefix)
(print_insn_cris_without_register_prefix): Call
cris_parse_disassembler_options.
* cris-opc.c (cris_spec_regs): Mention that this table isn't used
for CRISv32 and the size of immediate operands. New v32-only
entries for bz, pid, srs, wz, exs, eda, dz, ebp, erp, nrp, ccs and
spc. Add v32-only 4-byte entries for p2, p3, p5 and p6. Change
ccr, ibr, irp to be v0..v10. Change bar, dccr to be v8..v10.
Change brp to be v3..v10.
(cris_support_regs): New vector.
(cris_opcodes): Update head comment. New format characters '[',
']', space, 'A', 'd', 'N', 'n', 'Q', 'T', 'u', 'U', 'Y'.
Add new opcodes for v32 and adjust existing opcodes to accommodate
differences to earlier variants.
(cris_cond15s): New vector.

2004-11-04 Jan Beulich <[email protected]>

* i386-dis.c (Eq, Edqw, indirEp, Gdq, I1): Define.
(indirEb): Remove.
(Mp): Use f_mode rather than none at all.
(t_mode, dq_mode, dqw_mode, f_mode, const_1_mode): Define. t_mode
replaces what previously was x_mode; x_mode now means 128-bit SSE
operands.
(dis386): Make far jumps and calls have an 'l' prefix only in AT&T
mode. movmskpX's, pextrw's, and pmovmskb's first operands are Gdq.
pinsrw's second operand is Edqw.
(grps): 1-bit shifts' and rotates' second operands are I1. cmpxchg8b's
operand is Eq. movntq's and movntdq's first operands are EM. s[gi]dt,
fldenv, frstor, fsave, fstenv all should also have suffixes in Intel
mode when an operand size override is present or always suffixing.
More instructions will need to be added to this group.
(putop): Handle new macro chars 'C' (short/long suffix selector),
'I' (Intel mode override for following macro char), and 'J' (for
adding the 'l' prefix to far branches in AT&T mode). When an
alternative was specified in the template, honor macro character when
specified for Intel mode.
(OP_E): Handle new *_mode values. Correct pointer specifications for
memory operands. Consolidate output of index register.
(OP_G): Handle new *_mode values.
(OP_I): Handle const_1_mode.
(OP_ESreg, OP_DSreg): Generate pointer specifications. Indicate
respective opcode prefix bits have been consumed.
(OP_EM, OP_EX): Provide some default handling for generating pointer
specifications.

2004-10-28 Tomer Levi <[email protected]>

* crx-opc.c (REV_COP_INST): New macro, reverse operand order of
COP_INST macro.

2004-10-27 Tomer Levi <[email protected]>

* crx-dis.c (enum REG_ARG_TYPE): New, replacing COP_ARG_TYPE.
(getregliststring): Support HI/LO and user registers.
* crx-opc.c (crx_instruction): Update data structure according to the
rearrangement done in CRX opcode header file.
(crx_regtab): Likewise.
(crx_optab): Likewise.
(crx_instruction): Reorder load/stor instructions, remove unsupported
formats.
support new Co-Processor instruction 'cpi'.

2004-10-27 Nick Clifton <[email protected]>

* opcodes/iq2000-asm.c: Regenerate.
* opcodes/iq2000-desc.c: Regenerate.
* opcodes/iq2000-desc.h: Regenerate.
* opcodes/iq2000-dis.c: Regenerate.
* opcodes/iq2000-ibld.c: Regenerate.
* opcodes/iq2000-opc.c: Regenerate.
* opcodes/iq2000-opc.h: Regenerate.

2004-10-21 Tomer Levi <[email protected]>

* crx-opc.c (crx_instruction): Replace i3, i4, i5 with us3,
us4, us5 (respectively).
Remove unsupported 'popa' instruction.
Reverse operands order in store co-processor instructions.

2004-10-15 Alan Modra <[email protected]>

* Makefile.am: Run "make dep-am"
* Makefile.in: Regenerate.

2004-10-12 Bob Wilson <[email protected]>

* xtensa-dis.c: Use ISO C90 formatting.

2004-10-09 Alan Modra <[email protected]>

* ppc-opc.c: Revert 2004-09-09 change.

2004-10-07 Bob Wilson <[email protected]>

* xtensa-dis.c (state_names): Delete.
(fetch_data): Use xtensa_isa_maxlength.
(print_xtensa_operand): Replace operand parameter with opcode/operand
pair. Remove print_sr_name parameter. Use new xtensa-isa.h functions.
(print_insn_xtensa): Use new xtensa-isa.h functions. Handle multislot
instruction bundles. Use xmalloc instead of malloc.

2004-10-07 David Gibson <[email protected]>

* ppc-opc.c: Replace literal "0"s with NULLs in pointer
initializers.

2004-10-07 Tomer Levi <[email protected]>

* crx-opc.c (crx_instruction): Support Co-processor insns.
* crx-dis.c (COP_ARG_TYPE): New enum for CO-Processor arguments.
(getregliststring): Change function to use the above enum.
(print_arg): Handle CO-Processor insns.
(crx_cinvs): Add 'b' option to invalidate the branch-target
cache.

2004-10-06 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Add efscfd, efdabs, efdnabs,
efdneg, efdadd, efdsub, efdmul, efddiv, efdcmpgt, efdcmplt,
efdcmpeq, efdtstgt, efdtstlt, efdtsteq, efdcfsi, efdcfsid,
efdcfui, efdcfuid, efdcfsf, efdcfuf, efdctsi, efdctsidz, efdctsiz,
efdctui, efdctuidz, efdctuiz, efdctsf, efdctuf, efdctuf, efdcfs.

2004-10-01 Bill Farmer <[email protected]>

* pdp11-dis.c (print_insn_pdp11): Subtract the SOB's displacement
rather than add it.

2004-09-30 Paul Brook <[email protected]>

* arm-dis.c (print_insn_arm): Handle 'e' for SMI instruction.
* arm-opc.h: Document %e. Add ARMv6ZK instructions.

2004-09-17 H.J. Lu <[email protected]>

* Makefile.am (AUTOMAKE_OPTIONS): Require 1.9.
(CONFIG_STATUS_DEPENDENCIES): New.
(Makefile): Removed.
(config.status): Likewise.
* Makefile.in: Regenerated.

2004-09-17 Alan Modra <[email protected]>

* Makefile.am: Run "make dep-am".
* Makefile.in: Regenerate.
* aclocal.m4: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.

2004-09-11 Andreas Schwab <[email protected]>

* configure: Rebuild.

2004-09-09 Segher Boessenkool <[email protected]>

* ppc-opc.c (L): Make this field not optional.

2004-09-03 Tomer Levi <[email protected]>

* opc-crx.c: Rename 'popma' to 'popa', remove 'pushma'.
Fix parameter to 'm[t|f]csr' insns.

2004-08-30 Nathanael Nerode <[email protected]>

* configure.in: Autoupdate to autoconf 2.59.
* aclocal.m4: Rebuild with aclocal 1.4p6.
* configure: Rebuild with autoconf 2.59.
* Makefile.in: Rebuild with automake 1.4p6 (picking up
bfd changes for autoconf 2.59 on the way).
* config.in: Rebuild with autoheader 2.59.

2004-08-27 Richard Sandiford <[email protected]>

* frv-desc.[ch], frv-opc.[ch]: Regenerated.

2004-07-30 Michal Ludvig <[email protected]>

* i386-dis.c (GRPPADLCK): Renamed to GRPPADLCK1
(GRPPADLCK2): New define.
(twobyte_has_modrm): True for 0xA6.
(grps): GRPPADLCK2 for opcode 0xA6.

2004-07-29 Alexandre Oliva <[email protected]>

Introduce SH2a support.
* sh-opc.h (arch_sh2a_base): Renumber.
(arch_sh2a_nofpu_base): Remove.
(arch_sh_base_mask): Adjust.
(arch_opann_mask): New.
(arch_sh2a, arch_sh2a_nofpu): Adjust.
(arch_sh2a_up, arch_sh2a_nofpu_up): Likewise.
(sh_table): Adjust whitespace.
2004-02-24 Corinna Vinschen <[email protected]>
* sh-opc.h (arch_sh2a_nofpu_up): New. Use instead of arch_sh2a_up in
instruction list throughout.
(arch_sh2a_up): Redefine to include fpu instruction set. Use instead
of arch_sh2a in instruction list throughout.
(arch_sh2e_up): Accomodate above changes.
(arch_sh2_up): Ditto.
2004-02-20 Corinna Vinschen <[email protected]>
* sh-opc.h: Add arch_sh2a_nofpu to arch_sh2_up.
2004-02-18 Corinna Vinschen <[email protected]>
* sh-dis.c (print_insn_sh): Add bfd_mach_sh2a_nofpu handling.
* sh-opc.h (arch_sh2a_nofpu): New.
(arch_sh2a_up): New, defines sh2a and sh2a_nofpu.
(sh_table): Change all arch_sh2a to arch_sh2a_up unless FPU
instruction.
2004-01-20 DJ Delorie <[email protected]>
* sh-dis.c (print_insn_sh): SH2A does not have 'X' fp regs.
2003-12-29 DJ Delorie <[email protected]>
* sh-opc.c (sh_nibble_type, sh_arg_type, arch_2a, arch_2e_up,
sh_opcode_info, sh_table): Add sh2a support.
(arch_op32): New, to tag 32-bit opcodes.
* sh-dis.c (print_insn_sh): Support sh2a opcodes.
2003-12-02 Michael Snyder <[email protected]>
* sh-opc.h (arch_sh2a): Add.
* sh-dis.c (arch_sh2a): Handle.
* sh-opc.h (arch_sh2_up): Fix up to include arch_sh2a.

2004-07-27 Tomer Levi <[email protected]>

* crx-opc.c: Add popx,pushx insns. Indent code, fix comments.

2004-07-22 Nick Clifton <[email protected]>

PR/280
* h8300-dis.c (bfd_h8_disassemble): Do not dump raw bytes for the
insns - this is done by objdump itself.
* h8500-dis.c (print_insn_h8500): Likewise.

2004-07-21 Jan Beulich <[email protected]>

* i386-dis.c (OP_E): Show rip-relative addressing in 64-bit mode
regardless of address size prefix in effect.
(ptr_reg): Size or address registers does not depend on rex64, but
on the presence of an address size override.
(OP_MMX): Use rex.x only for xmm registers.
(OP_EM): Use rex.z only for xmm registers.

2004-07-20 Maciej W. Rozycki <[email protected]>

* mips-opc.c (mips_builtin_opcodes): Move coprocessor 2
move/branch operations to the bottom so that VR5400 multimedia
instructions take precedence in disassembly.

2004-07-20 Maciej W. Rozycki <[email protected]>

* mips-opc.c (mips_builtin_opcodes): Remove the MIPS32
ISA-specific "break" encoding.

2004-07-13 Elvis Chiang <[email protected]>

* arm-opc.h: Fix typo in comment.

2004-07-11 Andreas Schwab <[email protected]>

* m68k-dis.c (m68k_valid_ea): Fix typos in last change.

2004-07-09 Andreas Schwab <[email protected]>

* m68k-dis.c (m68k_valid_ea): Check validity of all codes.

2004-07-07 Tomer Levi <[email protected]>

* Makefile.am (CFILES): Add crx-dis.c, crx-opc.c.
(ALL_MACHINES): Add crx-dis.lo, crx-opc.lo.
(crx-dis.lo): New target.
(crx-opc.lo): Likewise.
* Makefile.in: Regenerate.
* configure.in: Handle bfd_crx_arch.
* configure: Regenerate.
* crx-dis.c: New file.
* crx-opc.c: New file.
* disassemble.c (ARCH_crx): Define.
(disassembler): Handle ARCH_crx.

2004-06-29 James E Wilson <[email protected]>

* ia64-opc-a.c (ia64_opcodes_a): Delete mov immediate pseudo for adds.
* ia64-asmtab.c: Regnerate.

2004-06-28 Alan Modra <[email protected]>

* ppc-opc.c (insert_fxm): Handle mfocrf and mtocrf.
(extract_fxm): Don't test dialect.
(XFXFXM_MASK): Include the power4 bit.
(XFXM): Add p4 param.
(powerpc_opcodes): Add mfocrf and mtocrf. Adjust mtcr.

2004-06-27 Alexandre Oliva <[email protected]>

2003-07-21 Richard Sandiford <[email protected]>
* disassemble.c (disassembler): Handle bfd_mach_h8300sxn.

2004-06-26 Alan Modra <[email protected]>

* ppc-opc.c (BH, XLBH_MASK): Define.
(powerpc_opcodes): Allow BH field on bclr, bclrl, bcctr, bcctrl.

2004-06-24 Alan Modra <[email protected]>

* i386-dis.c (x_mode): Comment.
(two_source_ops): File scope.
(float_mem): Correct fisttpll and fistpll.
(float_mem_mode): New table.
(dofloat): Use it.
(OP_E): Correct intel mode PTR output.
(ptr_reg): Use open_char and close_char.
(PNI_Fixup): Handle possible suffix on sidt. Use op1out etc. for
operands. Set two_source_ops.

2004-06-15 Alan Modra <[email protected]>

* arc-ext.c (build_ARC_extmap): Use bfd_get_section_size
instead of _raw_size.

2004-06-08 Jakub Jelinek <[email protected]>

* ia64-gen.c (in_iclass): Handle more postinc st
and ld variants.
* ia64-asmtab.c: Rebuilt.

2004-06-01 Martin Schwidefsky <[email protected]>

* s390-opc.txt: Correct architecture mask for some opcodes.
lrv, lrvh, strv, ml, dl, alc, slb rll and mvclu are available
in the esa mode as well.

2004-05-28 Andrew Stubbs <[email protected]>

* sh-dis.c (target_arch): Make unsigned.
(print_insn_sh): Replace (most of) switch with a call to
sh_get_arch_from_bfd_mach(). Also use new architecture flags system.
* sh-opc.h: Redefine architecture flags values.
Add sh3-nommu architecture.
Reorganise <arch>_up macros so they make more visual sense.
(SH_MERGE_ARCH_SET): Define new macro.
(SH_VALID_BASE_ARCH_SET): Likewise.
(SH_VALID_MMU_ARCH_SET): Likewise.
(SH_VALID_CO_ARCH_SET): Likewise.
(SH_VALID_ARCH_SET): Likewise.
(SH_MERGE_ARCH_SET_VALID): Likewise.
(SH_ARCH_SET_HAS_FPU): Likewise.
(SH_ARCH_SET_HAS_DSP): Likewise.
(SH_ARCH_UNKNOWN_ARCH): Likewise.
(sh_get_arch_from_bfd_mach): Add prototype.
(sh_get_arch_up_from_bfd_mach): Likewise.
(sh_get_bfd_mach_from_arch_set): Likewise.
(sh_merge_bfd_arc): Likewise.

2004-05-24 Peter Barada <[email protected]>

* m68k-dis.c(print_insn_m68k): Strip body of diassembly out
into new match_insn_m68k function. Loop over canidate
matches and select first that completely matches.
* m68k-dis.c(print_insn_arg): Fix 'g' case to only extract 1 bit.
* m68k-dis.c(print_insn_arg): Call new function m68k_valid_ea
to verify addressing for MAC/EMAC.
* m68k-dis.c(print_insn_arg): Use reg_half_names for MAC/EMAC
reigster halves since 'fpu' and 'spl' look misleading.
* m68k-dis.c(fetch_arg): Fix 'G', 'H', 'I', 'f', 'M', 'N' cases.
* m68k-opc.c: Rearragne mac/emac cases to use longest for
first, tighten up match masks.
* m68k-opc.c: Add 'size' field to struct m68k_opcode. Produce
'size' from special case code in print_insn_m68k to
determine decode size of insns.

2004-05-19 Alan Modra <[email protected]>

* ppc-opc.c (insert_fxm): Enable two operand mfcr when -many as
well as when -mpower4.

2004-05-13 Nick Clifton <[email protected]>

* po/fr.po: Updated French translation.

2004-05-05 Peter Barada <[email protected]>

* m68k-dis.c(print_insn_m68k): Add new chips, use core
variants in arch_mask. Only set m68881/68851 for 68k chips.
* m68k-op.c: Switch from ColdFire chips to core variants.

2004-05-05 Alan Modra <[email protected]>

PR 147.
* ppc-opc.c (PPCVEC): Remove PPC_OPCODE_PPC.

2004-04-29 Ben Elliston <[email protected]>

* ppc-opc.c (XCMPL): Renmame to XOPL. Update users.
(powerpc_opcodes): Add "dbczl" instruction for PPC970.

2004-04-22 Kaz Kojima <[email protected]>

* sh-dis.c (print_insn_sh): Print the value in constant pool
as a symbol if it looks like a symbol.

2004-04-22 Peter Barada <[email protected]>

* m68k-dis.c(print_insn_m68k): Set mfcmac/mcfemac on
appropriate ColdFire architectures.
(print_insn_m68k): Handle EMAC, MAC/EMAC scalefactor, and MAC/EMAC
mask addressing.
Add EMAC instructions, fix MAC instructions. Remove
macmw/macml/msacmw/msacml instructions since mask addressing now
supported.

2004-04-20 Jakub Jelinek <[email protected]>

* sparc-opc.c (fmoviccx, fmovfccx, fmovccx): Define.
(fmovicc, fmovfcc, fmovcc): Remove fpsize argument, change opcode to
suffix. Use fmov*x macros, create all 3 fpsize variants in one
macro. Adjust all users.

2004-04-15 Anil Paranjpe <[email protected]>

* h8300-dis.c (bfd_h8_disassemble) : Treat "adds" & "subs"
separately.

2004-03-30 Kazuhiro Inaoka <[email protected]>

* m32r-asm.c: Regenerate.

2004-03-29 Stan Shebs <[email protected]>

* mpw-config.in, mpw-make.sed: Remove MPW support files, no longer
used.

2004-03-19 Alan Modra <[email protected]>

* aclocal.m4: Regenerate.
* config.in: Regenerate.
* configure: Regenerate.
* po/POTFILES.in: Regenerate.
* po/opcodes.pot: Regenerate.

2004-03-16 Alan Modra <[email protected]>

* ppc-dis.c (print_insn_powerpc): Don't print tabs. Handle
PPC_OPERANDS_GPR_0.
* ppc-opc.c (RA0): Define.
(RAQ, RAL, RAM, RAS, RSQ, RTQ, RSO): Use PPC_OPERAND_GPR_0.
(RAOPT): Rename from RAO. Update all uses.
(powerpc_opcodes): Use RA0 as appropriate.

2004-03-15 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Add BOOKE versions of mfsprg.

2004-03-15 Alan Modra <[email protected]>

* sparc-dis.c (print_insn_sparc): Update getword prototype.

2004-03-12 Michal Ludvig <[email protected]>

* i386-dis.c (GRPPLOCK): Delete.
(grps): Delete GRPPLOCK entry.

2004-03-12 Alan Modra <[email protected]>

* i386-dis.c (OP_M, OP_0f0e, OP_0fae, NOP_Fixup): New functions.
(M, Mp): Use OP_M.
(None, PADLOCK_SPECIAL, PADLOCK_0): Delete.
(GRPPADLCK): Define.
(dis386): Use NOP_Fixup on "nop".
(dis386_twobyte): Use GRPPADLCK on opcode 0xa7.
(twobyte_has_modrm): Set for 0xa7.
(padlock_table): Delete. Move to..
(grps): ..here, using OP_0f07. Use OP_Ofae on lfence, mfence
and clflush.
(print_insn): Revert PADLOCK_SPECIAL code.
(OP_E): Delete sfence, lfence, mfence checks.

2004-03-12 Jakub Jelinek <[email protected]>

* i386-dis.c (grps): Use INVLPG_Fixup instead of OP_E for invlpg.
(INVLPG_Fixup): New function.
(PNI_Fixup): Remove ATTRIBUTE_UNUSED from sizeflag.

2004-03-12 Michal Ludvig <[email protected]>

* i386-dis.c (PADLOCK_SPECIAL, PADLOCK_0): New defines.
(dis386_twobyte): Opcode 0xa7 is PADLOCK_0.
(padlock_table): New struct with PadLock instructions.
(print_insn): Handle PADLOCK_SPECIAL.

2004-03-12 Alan Modra <[email protected]>

* i386-dis.c (grps): Use clflush by default for 0x0fae/7.
(OP_E): Twiddle clflush to sfence here.

2004-03-08 Nick Clifton <[email protected]>

* po/de.po: Updated German translation.

2003-03-03 Andrew Stubbs <[email protected]>

* sh-dis.c (print_insn_sh): Don't disassemble fp instructions in
nofpu mode. Add BFD type bfd_mach_sh4_nommu_nofpu.
* sh-opc.h: Add sh4_nommu_nofpu architecture and adjust instructions
accordingly.

2004-03-01 Richard Sandiford <[email protected]>

* frv-asm.c: Regenerate.
* frv-desc.c: Regenerate.
* frv-desc.h: Regenerate.
* frv-dis.c: Regenerate.
* frv-ibld.c: Regenerate.
* frv-opc.c: Regenerate.
* frv-opc.h: Regenerate.

2004-03-01 Richard Sandiford <[email protected]>

* frv-desc.c, frv-opc.c: Regenerate.

2004-03-01 Richard Sandiford <[email protected]>

* frv-desc.c, frv-opc.c, frv-opc.h: Regenerate.

2004-02-26 Andrew Stubbs <[email protected]>

* sh-opc.h: Move fsca and fsrra instructions from sh4a to sh4.
Also correct mistake in the comment.

2004-02-26 Andrew Stubbs <[email protected]>

* sh-dis.c (print_insn_sh): Add REG_N_D nibble type to
ensure that double registers have even numbers.
Add REG_N_B01 for nn01 (binary 01) nibble to ensure
that reserved instruction 0xfffd does not decode the same
as 0xfdfd (ftrv).
* sh-opc.h: Add REG_N_D nibble type and use it whereever
REG_N refers to a double register.
Add REG_N_B01 nibble type and use it instead of REG_NM
in ftrv.
Adjust the bit patterns in a few comments.

2004-02-25 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Change mask for dcbt and dcbtst.

2004-02-20 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Move mfmcsrr0 before mfdc_dat.

2004-02-20 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Add m*ivor35.

2004-02-20 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Add mfivor32, mfivor33, mfivor34,
mtivor32, mtivor33, mtivor34.

2004-02-19 Aldy Hernandez <[email protected]>

* ppc-opc.c (powerpc_opcodes): Add mfmcar.

2004-02-10 Petko Manolov <[email protected]>

* arm-opc.h Maverick accumulator register opcode fixes.

2004-02-13 Ben Elliston <[email protected]>

* m32r-dis.c: Regenerate.

2004-01-27 Michael Snyder <[email protected]>

* sh-opc.h (sh_table): "fsrra", not "fssra".

2004-01-23 Andrew Over <[email protected]>

* sparc-opc.c (fdtox, fstox, fqtox, fxtod, fxtos, fxtoq): Tighten
contraints.

2004-01-19 Andrew Over <[email protected]>

* sparc-opc.c (sparc_opcodes) <f[dsq]tox, fxto[dsq]>: Fix args.

2004-01-19 Alan Modra <[email protected]>

* i386-dis.c (OP_E): Print scale factor on intel mode sib when not
1. Don't print scale factor on AT&T mode when index missing.

2004-01-16 Alexandre Oliva <[email protected]>

* m10300-opc.c (mov): 8- and 24-bit immediates are zero-extended
when loaded into XR registers.

2004-01-14 Richard Sandiford <[email protected]>

* frv-desc.h: Regenerate.
* frv-desc.c: Regenerate.
* frv-opc.c: Regenerate.

2004-01-13 Michael Snyder <[email protected]>

* sh-dis.c (print_insn_sh): Allocate 4 bytes for insn.

2004-01-09 Paul Brook <[email protected]>

* arm-opc.h (arm_opcodes): Move generic mcrr after known
specific opcodes.

2004-01-07 Daniel Jacobowitz <[email protected]>

* Makefile.am (libopcodes_la_DEPENDENCIES)
(libopcodes_la_LIBADD): Revert 2003-05-17 change. Add explanatory
comment about the problem.
* Makefile.in: Regenerate.

2004-01-06 Alexandre Oliva <[email protected]>

2003-12-19 Alexandre Oliva <[email protected]>
* frv-asm.c (parse_ulo16, parse_uhi16, parse_d12): Fix some
cut&paste errors in shifting/truncating numerical operands.
2003-08-04 Alexandre Oliva <[email protected]>
* frv-asm.c (parse_ulo16): Parse gotofflo and gotofffuncdesclo.
(parse_uslo16): Likewise.
(parse_uhi16): Parse gotoffhi and gotofffuncdeschi.
(parse_d12): Parse gotoff12 and gotofffuncdesc12.
(parse_s12): Likewise.
2003-08-04 Alexandre Oliva <[email protected]>
* frv-asm.c (parse_ulo16): Parse gotlo and gotfuncdesclo.
(parse_uslo16): Likewise.
(parse_uhi16): Parse gothi and gotfuncdeschi.
(parse_d12): Parse got12 and gotfuncdesc12.
(parse_s12): Likewise.

2004-01-02 Albert Bartoszko <[email protected]>

* msp430-dis.c (msp430_doubleoperand): Check for an 'add'
instruction which looks similar to an 'rla' instruction.

For older changes see ChangeLog-0203

Copyright (C) 2004 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.

Local Variables:
mode: change-log
left-margin: 8
fill-column: 74
version-control: never
End: