# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Make Autoconf documentation.

# Copyright (C) 2000-2003, 2007-2012 Free Software Foundation, Inc.

# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = doc
DIST_COMMON = $(autoconf_TEXINFOS) $(srcdir)/Makefile.am \
       $(srcdir)/Makefile.in $(srcdir)/stamp-vti \
       $(srcdir)/version.texi $(standards_TEXINFOS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/autobuild.m4 \
       $(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/make-case.m4 \
       $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
       $(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
INFO_DEPS = $(srcdir)/autoconf.info $(srcdir)/standards.info
am__TEXINFO_TEX_DIR = $(srcdir)/../build-aux
DVIS = autoconf.dvi standards.dvi
PDFS = autoconf.pdf standards.pdf
PSS = autoconf.ps standards.ps
HTMLS = autoconf.html standards.html
TEXINFOS = autoconf.texi standards.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__installdirs = "$(DESTDIR)$(infodir)"
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
   $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
   *) f=$$p;; \
 esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
 for p in $$list; do echo "$$p $$p"; done | \
 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
   if (++n[$$2] == $(am__install_max)) \
     { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
   END { for (dir in files) print dir, files[dir] }'
am__base_list = \
 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EMACS = @EMACS@
EMACSLOADPATH = @EMACSLOADPATH@
EXPR = @EXPR@
GREP = @GREP@
HELP2MAN = @HELP2MAN@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
M4 = @M4@
M4_DEBUGFILE = @M4_DEBUGFILE@
M4_GNU = @M4_GNU@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PERL_FLOCK = @PERL_FLOCK@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TEST_EMACS = @TEST_EMACS@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_cv_dir_trailing_space = @ac_cv_dir_trailing_space@
ac_cv_sh_n_works = @ac_cv_sh_n_works@
ac_cv_unsupported_fs_chars = @ac_cv_unsupported_fs_chars@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
lispdir = @lispdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AM_MAKEINFOFLAGS = --no-split
TEXI2HTML_FLAGS = -split_chapter
TEXINFO_TEX = ../build-aux/texinfo.tex
info_TEXINFOS = autoconf.texi standards.texi
autoconf_TEXINFOS = fdl.texi install.texi
standards_TEXINFOS = fdl.texi gnu-oids.texi make-stds.texi
EXTRA_DIST = gendocs_template

# Files from texi2dvi that should be removed, but which Automake does
# not know.
CLEANFILES = autoconf.ACs  autoconf.cvs  autoconf.MSs  autoconf.prs \
            autoconf.ATs  autoconf.evs  autoconf.fns  autoconf.ovs \
            autoconf.ca   autoconf.CA   autoconf.cas  autoconf.CAs \
            autoconf.tmp

all: all-am

SUFFIXES:
SUFFIXES: .dvi .html .info .pdf .ps .texi
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
       @for dep in $?; do \
         case '$(am__configure_deps)' in \
           *$$dep*) \
             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
               && { if test -f $@; then exit 0; else break; fi; }; \
             exit 1;; \
         esac; \
       done; \
       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
       $(am__cd) $(top_srcdir) && \
         $(AUTOMAKE) --gnu doc/Makefile
PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
       @case '$?' in \
         *config.status*) \
           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
         *) \
           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
       esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

texi.info:
       restore=: && backupdir="$(am__leading_dot)am$$$$" && \
       am__cwd=`pwd` && $(am__cd) $(srcdir) && \
       rm -rf $$backupdir && mkdir $$backupdir && \
       if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
         for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
           if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
         done; \
       else :; fi && \
       cd "$$am__cwd"; \
       if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
        -o $@ $<; \
       then \
         rc=0; \
         $(am__cd) $(srcdir); \
       else \
         rc=$$?; \
         $(am__cd) $(srcdir) && \
         $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
       fi; \
       rm -rf $$backupdir; exit $$rc

texi.dvi:
       TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
       MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
       $(TEXI2DVI) $<

texi.pdf:
       TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
       MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
       $(TEXI2PDF) $<

texi.html:
       rm -rf $(@:.html=.htp)
       if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
        -o $(@:.html=.htp) $<; \
       then \
         rm -rf $@; \
         if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
           mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
       else \
         if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
           rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
         exit 1; \
       fi
$(srcdir)/autoconf.info: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.dvi: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.pdf: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
autoconf.html: autoconf.texi $(srcdir)/version.texi $(autoconf_TEXINFOS)
$(srcdir)/version.texi:  $(srcdir)/stamp-vti
$(srcdir)/stamp-vti: autoconf.texi $(top_srcdir)/configure
       @(dir=.; test -f ./autoconf.texi || dir=$(srcdir); \
       set `$(SHELL) $(top_srcdir)/build-aux/mdate-sh $$dir/autoconf.texi`; \
       echo "@set UPDATED $$1 $$2 $$3"; \
       echo "@set UPDATED-MONTH $$2 $$3"; \
       echo "@set EDITION $(VERSION)"; \
       echo "@set VERSION $(VERSION)") > vti.tmp
       @cmp -s vti.tmp $(srcdir)/version.texi \
         || (echo "Updating $(srcdir)/version.texi"; \
             cp vti.tmp $(srcdir)/version.texi)
       -@rm -f vti.tmp
       @cp $(srcdir)/version.texi $@

mostlyclean-vti:
       -rm -f vti.tmp

maintainer-clean-vti:
       -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi
$(srcdir)/standards.info: standards.texi $(standards_TEXINFOS)
standards.dvi: standards.texi $(standards_TEXINFOS)
standards.pdf: standards.texi $(standards_TEXINFOS)
standards.html: standards.texi $(standards_TEXINFOS)
dvi.ps:
       TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
       $(DVIPS) -o $@ $<

uninstall-dvi-am:
       @$(NORMAL_UNINSTALL)
       @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
       for p in $$list; do \
         $(am__strip_dir) \
         echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
         rm -f "$(DESTDIR)$(dvidir)/$$f"; \
       done

uninstall-html-am:
       @$(NORMAL_UNINSTALL)
       @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
       for p in $$list; do \
         $(am__strip_dir) \
         echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
         rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
       done

uninstall-info-am:
       @$(PRE_UNINSTALL)
       @if test -d '$(DESTDIR)$(infodir)' && \
           (install-info --version && \
            install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
         list='$(INFO_DEPS)'; \
         for file in $$list; do \
           relfile=`echo "$$file" | sed 's|^.*/||'`; \
           echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
           if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
           then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
         done; \
       else :; fi
       @$(NORMAL_UNINSTALL)
       @list='$(INFO_DEPS)'; \
       for file in $$list; do \
         relfile=`echo "$$file" | sed 's|^.*/||'`; \
         relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
         (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
            echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
            rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
          else :; fi); \
       done

uninstall-pdf-am:
       @$(NORMAL_UNINSTALL)
       @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
       for p in $$list; do \
         $(am__strip_dir) \
         echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
         rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
       done

uninstall-ps-am:
       @$(NORMAL_UNINSTALL)
       @list='$(PSS)'; test -n "$(psdir)" || list=; \
       for p in $$list; do \
         $(am__strip_dir) \
         echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
         rm -f "$(DESTDIR)$(psdir)/$$f"; \
       done

dist-info: $(INFO_DEPS)
       @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
       list='$(INFO_DEPS)'; \
       for base in $$list; do \
         case $$base in \
           $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
         esac; \
         if test -f $$base; then d=.; else d=$(srcdir); fi; \
         base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
         for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
           if test -f $$file; then \
             relfile=`expr "$$file" : "$$d/\(.*\)"`; \
             test -f "$(distdir)/$$relfile" || \
               cp -p $$file "$(distdir)/$$relfile"; \
           else :; fi; \
         done; \
       done

mostlyclean-aminfo:
       -rm -rf autoconf.AC autoconf.ACs autoconf.AT autoconf.ATs autoconf.CA \
         autoconf.CAs autoconf.MS autoconf.MSs autoconf.aux \
         autoconf.cp autoconf.cps autoconf.cv autoconf.cvs \
         autoconf.ev autoconf.evs autoconf.fn autoconf.fns \
         autoconf.ky autoconf.kys autoconf.log autoconf.ov \
         autoconf.ovs autoconf.pg autoconf.pgs autoconf.pr \
         autoconf.prs autoconf.tmp autoconf.toc autoconf.tp \
         autoconf.tps autoconf.vr standards.aux standards.cp \
         standards.cps standards.fn standards.ky standards.log \
         standards.pg standards.tmp standards.toc standards.tp \
         standards.tps standards.vr

clean-aminfo:
       -test -z "autoconf.dvi autoconf.pdf autoconf.ps autoconf.html standards.dvi \
         standards.pdf standards.ps standards.html" \
       || rm -rf autoconf.dvi autoconf.pdf autoconf.ps autoconf.html standards.dvi \
         standards.pdf standards.ps standards.html

maintainer-clean-aminfo:
       @list='$(INFO_DEPS)'; for i in $$list; do \
         i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
         echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
         rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
       done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
       list='$(DISTFILES)'; \
         dist_files=`for file in $$list; do echo $$file; done | \
         sed -e "s|^$$srcdirstrip/||;t" \
             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
       case $$dist_files in \
         */*) $(MKDIR_P) `echo "$$dist_files" | \
                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
                          sort -u` ;; \
       esac; \
       for file in $$dist_files; do \
         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
         if test -d $$d/$$file; then \
           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
           if test -d "$(distdir)/$$file"; then \
             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
           fi; \
           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
           fi; \
           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
         else \
           test -f "$(distdir)/$$file" \
           || cp -p $$d/$$file "$(distdir)/$$file" \
           || exit 1; \
         fi; \
       done
       $(MAKE) $(AM_MAKEFLAGS) \
         top_distdir="$(top_distdir)" distdir="$(distdir)" \
         dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS)
installdirs:
       for dir in "$(DESTDIR)$(infodir)"; do \
         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
       done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
         `test -z '$(STRIP)' || \
           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
       @echo "This command is intended for maintainers to use"
       @echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-aminfo clean-generic mostlyclean-am

distclean: distclean-am
       -rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
       @$(NORMAL_INSTALL)
       test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
       @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
       for p in $$list; do \
         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
         echo "$$d$$p"; \
       done | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
       done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
       @$(NORMAL_INSTALL)
       test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
       @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
       for p in $$list; do \
         if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
         $(am__strip_dir) \
         if test -d "$$d$$p"; then \
           echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
           $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
           echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
           $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
         else \
           list2="$$list2 $$d$$p"; \
         fi; \
       done; \
       test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
       done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
       @$(NORMAL_INSTALL)
       test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
       @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
       list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
       for file in $$list; do \
         case $$file in \
           $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
         esac; \
         if test -f $$file; then d=.; else d=$(srcdir); fi; \
         file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
         for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                      $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
           if test -f $$ifile; then \
             echo "$$ifile"; \
           else : ; fi; \
         done; \
       done | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
       @$(POST_INSTALL)
       @if (install-info --version && \
            install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
         list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
         for file in $$list; do \
           relfile=`echo "$$file" | sed 's|^.*/||'`; \
           echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
           install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
         done; \
       else : ; fi
install-man:

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
       @$(NORMAL_INSTALL)
       test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
       @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
       for p in $$list; do \
         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
         echo "$$d$$p"; \
       done | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
       @$(NORMAL_INSTALL)
       test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
       @list='$(PSS)'; test -n "$(psdir)" || list=; \
       for p in $$list; do \
         if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
         echo "$$d$$p"; \
       done | $(am__base_list) | \
       while read files; do \
         echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
         $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
       -rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
       maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
       uninstall-pdf-am uninstall-ps-am

MAKE: install-am install-strip

PHONY: all all-am check check-am clean clean-aminfo clean-generic \
       dist-info distclean distclean-generic distdir dvi dvi-am html \
       html-am info info-am install install-am install-data \
       install-data-am install-dvi install-dvi-am install-exec \
       install-exec-am install-html install-html-am install-info \
       install-info-am install-man install-pdf install-pdf-am \
       install-ps install-ps-am install-strip installcheck \
       installcheck-am installdirs maintainer-clean \
       maintainer-clean-aminfo maintainer-clean-generic \
       maintainer-clean-vti mostlyclean mostlyclean-aminfo \
       mostlyclean-generic mostlyclean-vti pdf pdf-am ps ps-am \
       uninstall uninstall-am uninstall-dvi-am uninstall-html-am \
       uninstall-info-am uninstall-pdf-am uninstall-ps-am


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
NOEXPORT:

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.