/*
* Copyright (c) 2004 by Internet Systems Consortium, Inc. ("ISC")
* Copyright (c) 1996,1999 by Internet Software Consortium.
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS.  IN NO EVENT SHALL ISC BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
* OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/

#include <sys/cdefs.h>
#ifndef lint
__RCSID("$NetBSD: strtoaddr.c,v 1.5 2024/09/02 16:15:33 christos Exp $");
#endif

#include <config.h>

#include "netdissect-stdinc.h"
#include <stddef.h>
#include <string.h>

#include "netdissect-ctype.h"

#include "strtoaddr.h"

#ifndef NS_INADDRSZ
#define NS_INADDRSZ     4       /* IPv4 T_A */
#endif

#ifndef NS_IN6ADDRSZ
#define NS_IN6ADDRSZ    16      /* IPv6 T_AAAA */
#endif

#ifndef NS_INT16SZ
#define NS_INT16SZ      2       /* #/bytes of data in a uint16_t */
#endif

/*%
* WARNING: Don't even consider trying to compile this on a system where
* sizeof(int) < 4.  sizeof(int) > 4 is fine; all the world's not a VAX.
*/

/* int
* strtoaddr(src, dst)
*      convert presentation level IPv4 address to network order binary form.
* return:
*      1 if `src' is a valid input, else 0.
* notice:
*      does not touch `dst' unless it's returning 1.
* author:
*      Paul Vixie, 1996.
*/
int
strtoaddr(const char *src, void *dst)
{
       uint32_t val;
       u_int digit;
       ptrdiff_t n;
       unsigned char c;
       u_int parts[4];
       u_int *pp = parts;

       c = *src;
       for (;;) {
               /*
                * Collect number up to ``.''.
                * Values are specified as for C:
                * 0x=hex, 0=octal, isdigit=decimal.
                */
               if (!ND_ASCII_ISDIGIT(c))
                       return (0);
               val = 0;
               if (c == '0') {
                       c = *++src;
                       if (c == 'x' || c == 'X')
                               return (0);
                       else if (ND_ASCII_ISDIGIT(c) && c != '9')
                               return (0);
               }
               for (;;) {
                       if (ND_ASCII_ISDIGIT(c)) {
                               digit = c - '0';
                               val = (val * 10) + digit;
                               c = *++src;
                       } else
                               break;
               }
               if (c == '.') {
                       /*
                        * Internet format:
                        *      a.b.c.d
                        *      a.b.c   (with c treated as 16 bits)
                        *      a.b     (with b treated as 24 bits)
                        *      a       (with a treated as 32 bits)
                        */
                       if (pp >= parts + 3)
                               return (0);
                       *pp++ = val;
                       c = *++src;
               } else
                       break;
       }
       /*
        * Check for trailing characters.
        */
       if (c != '\0' && c != ' ' && c != '\t')
               return (0);
       /*
        * Find the number of parts specified.
        * It must be 4; we only support dotted quads, we don't
        * support shorthand.
        */
       n = pp - parts + 1;
       if (n != 4)
               return (0);
       /*
        * parts[0-2] were set to the first 3 parts of the address;
        * val was set to the 4th part.
        *
        * Check if any part is bigger than 255.
        */
       if ((parts[0] | parts[1] | parts[2] | val) > 0xff)
               return (0);
       /*
        * Add the other three parts to val.
        */
       val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
       if (dst) {
               val = htonl(val);
               memcpy(dst, &val, NS_INADDRSZ);
       }
       return (1);
}

/* int
* strtoaddr6(src, dst)
*      convert presentation level IPv6 address to network order binary form.
* return:
*      1 if `src' is a valid [RFC1884 2.2] address, else 0.
* notice:
*      (1) does not touch `dst' unless it's returning 1.
*      (2) :: in a full address is silently ignored.
* credit:
*      inspired by Mark Andrews.
* author:
*      Paul Vixie, 1996.
*/
int
strtoaddr6(const char *src, void *dst)
{
       static const char xdigits_l[] = "0123456789abcdef",
                         xdigits_u[] = "0123456789ABCDEF";
       u_char tmp[NS_IN6ADDRSZ], *tp, *endp, *colonp;
       const char *xdigits, *curtok;
       int ch, seen_xdigits;
       u_int val;

       memset((tp = tmp), '\0', NS_IN6ADDRSZ);
       endp = tp + NS_IN6ADDRSZ;
       colonp = NULL;
       /* Leading :: requires some special handling. */
       if (*src == ':')
               if (*++src != ':')
                       return (0);
       curtok = src;
       seen_xdigits = 0;
       val = 0;
       while ((ch = *src++) != '\0') {
               const char *pch;

               if ((pch = strchr((xdigits = xdigits_l), ch)) == NULL)
                       pch = strchr((xdigits = xdigits_u), ch);
               if (pch != NULL) {
                       val <<= 4;
                       val |= (int)(pch - xdigits);
                       if (++seen_xdigits > 4)
                               return (0);
                       continue;
               }
               if (ch == ':') {
                       curtok = src;
                       if (!seen_xdigits) {
                               if (colonp)
                                       return (0);
                               colonp = tp;
                               continue;
                       } else if (*src == '\0')
                               return (0);
                       if (tp + NS_INT16SZ > endp)
                               return (0);
                       *tp++ = (u_char) (val >> 8) & 0xff;
                       *tp++ = (u_char) val & 0xff;
                       seen_xdigits = 0;
                       val = 0;
                       continue;
               }
               if (ch == '.' && ((tp + NS_INADDRSZ) <= endp) &&
                   strtoaddr(curtok, tp) > 0) {
                       tp += NS_INADDRSZ;
                       seen_xdigits = 0;
                       break;  /*%< '\\0' was seen by strtoaddr(). */
               }
               return (0);
       }
       if (seen_xdigits) {
               if (tp + NS_INT16SZ > endp)
                       return (0);
               *tp++ = (u_char) (val >> 8) & 0xff;
               *tp++ = (u_char) val & 0xff;
       }
       if (colonp != NULL) {
               /*
                * Since some memmove()'s erroneously fail to handle
                * overlapping regions, we'll do the shift by hand.
                */
               const ptrdiff_t n = tp - colonp;
               int i;

               if (tp == endp)
                       return (0);
               for (i = 1; i <= n; i++) {
                       endp[- i] = colonp[n - i];
                       colonp[n - i] = 0;
               }
               tp = endp;
       }
       if (tp != endp)
               return (0);
       memcpy(dst, tmp, NS_IN6ADDRSZ);
       return (1);
}