Compilation:
       Usual thing: rm -f Config.local ; make for vanilla
                       make refconf for reference clock (e. g. DCF77)

Directory contents:

       hints/PARSE     - this file

       xntpd/refclock_parse.c
                       - reference clock support for DCF77/GPS in xntp
       parse/parse.c
                       - Reference clock data parser framework
       parse/parse_conf.c
                       - parser configuration (clock types)
       parse/clk_meinberg.c
                       - Meinberg clock formats (DCF U/A 31, PZF 535, GPS166)
       parse/clk_schmid.c
                       - Schmid receiver (DCF77)
       parse/clk_rawdcf.c
                       - 100/200ms pulses via 50 Baud line (DCF77)
       parse/clk_dcf7000.c
                       - ELV DCF7000 (DCF77)
       parse/clk_trimble.c
                       - Trimble SV6 GPS receiver

                         If you want to add new clock types please check
                         with [email protected]. These files
                         implement the conversion of RS232 data streams into
                         timing information used by refclock_parse.c which is
                         mostly generic except for NTP configuration constants.

       parse/Makefile.kernel
                       - *SIMPLE* makefile to build a loadable STREAMS
                         module for SunOS 4.x / SunOS 5.x systems

       parse/parsestreams.c
                       - SUN Streams module (loadable) for radio clocks
                         This streams module is designed for SunOS 4.1.X.

       parse/parsesolaris.c
                       - SUN Streams module (loadable) for radio clocks.
                         This streams module is designed for SunOS 5.x
                         Beware this is still new - so it might crash
                         your machine (we have seen it working, though).

       parse/parsetest.c
                       - simple test program for STREAMS module. Its so simple,
                         that it doesn't even set TTY-modes, thus they got to
                         be correct on startup - works for Meinberg receivers

       parse/testdcf.c
                       - test program for raw DCF77 (100/200ms pulses)
                         receivers

       include/parse.h - interface to "parse" module and more
       include/parse_conf.h
                       - interface to "parse" configuration

       include/sys/parsestreams.h
                       - STREAMS specific definitions

       scripts/support
                       - scripts (perl & sh) for statistics and rc startup
                         the startup scripts are used in Erlangen for
                         starting the daemon on a variety of Suns and HPs
                         and for Reference Clock startup on Suns
                         These scripts may or may not be helpful to you.

Supported clocks:
       Meinberg DCF U/A 31
       Meinberg PZF535/TCXO    (Software revision PZFUERL 4.6)
       Meinberg PZF535/OCXO    (Software revision PZFUERL 4.6)
       Meinberg GPS166         (Software version for Uni-Erlangen)
       ELV DCF7000             (not recommended - casual/emergency use only)
       Conrad DCF77 receiver   (email: [email protected])
         + level converter
       TimeBrick               (email: [email protected])
       Schmid Receiver Kit
       Trimble SV6 GPS receiver

Addresses:
 Meinberg Funkuhren
 Auf der Landwehr 22
 31812 Bad Pyrmont
 Germany
 Tel.: 05281/20 18
 FAX:  05281/60 81 80

 ELV Kundenservice
 Postfach 1000
 26787 Leer
 Germany
 Tel.: 0491/60 08 88

 Walter Schmidt
 Eichwisrain 14
 8634 Hombrechtikon
 Switzerland

If you have problems mail to:

       [email protected]

We'll help (conditions permitting)