# $NetBSD: rc.conf,v 1.167 2023/10/05 08:19:27 abs Exp $
#
# /etc/defaults/rc.conf --
# default configuration of /etc/rc.conf
#
# see rc.conf(5) for more information.
#
# DO NOT EDIT THIS FILE DIRECTLY; IT MAY BE REPLACED DURING A SYSTEM UPGRADE.
# EDIT /etc/rc.conf INSTEAD.
#
#
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
#
# Uncomment this if you want to use local paths in rc.
#
#export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin
# Uncomment the following to execute each /etc/rc.d script in
# the current shell rather than in a subshell. This may be
# faster on very slow machines that have an expensive fork(2).
# NOTE: USE THIS AT YOUR OWN RISK; A ROGUE COMMAND
# MAY INADVERTENTLY PREVENT BOOT TO MULTIUSER.
#
#rc_fast_and_loose=YES
# If rc_silent is true then /etc/rc will suppress most output to
# the console. The default is taken from the AB_SILENT flag passed
# from the boot loader to the kernel in the boothowto(9) variable.
#
# rc_silent_cmd is executed once for each suppressed line of output.
# Useful values are ":" and "twiddle".
#
rc_silent=$( [ "$(( $(/sbin/sysctl -n kern.boothowto 2>/dev/null || echo 0) \
& 0x40000 ))" != 0 ] && echo true || echo false )
rc_silent_cmd=twiddle
# Additional flags to the rcorder(8) that's run by /etc/rc.
#
rc_rcorder_flags=""
# The directories searched for rc scripts.
# These directories must be part of the root file system.
rc_directories=/etc/rc.d
# If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.
#
do_rcshutdown=YES
# Additional flags to the rcorder(8) that's run by /etc/rc.shutdown.
#
rcshutdown_rcorder_flags=""
# If this is non-blank, use as the number of seconds to run a watchdog
# timer which will terminate /etc/rc.shutdown if the timeout expires.
#
rcshutdown_timeout=""
# Basic network configuration
#
# Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu).
# If blank, use /etc/myname.
#
hostname=""
# If there's only one way out of your IPv4 network, set this to the hostname
# or the IPv4 address of the router that will get your packets off the LAN.
# If blank, use /etc/mygate.
#
defaultroute=""
# Same thing for IPv6. If blank, use /etc/mygate6.
#
defaultroute6=""
# The NIS domain name (formerly known as Yellow Pages); not in any way
# related to Internet domain names.
# If blank, use /etc/defaultdomain.
#
domainname=""
# Filesystems to mount early in boot-up.
# Note that `/var' is needed in $critical_filesystems_local (or
# implied as part of `/') as certain services that need /var (such as
# dhcpcd) may be needed to get the network operational enough to mount
# the $critical_filesystems_remote. Prepending "OPTIONAL:" means it
# will not be an error if that file system is not present in fstab(5).
#
critical_filesystems_local="OPTIONAL:/var"
critical_filesystems_remote="OPTIONAL:/usr"
critical_filesystems_zfs=""
# Swap device controls.
#
no_swap=NO # Set to YES if you have purposefully setup no swap
# partitions and don't want to be warned about it.
swapoff=YES # Remove block-type swap partitions upon shutdown
# This defaults to yes, so that raids shutdown cleanly
swapoff_umount=auto # Set to 'manual' to umount the tmpfs partitions listed
# in swapoff_umount_fs before removing swap. Set to
# 'auto' to umount all tmpfs partitions that contain
# no device nodes.
swapoff_umount_fs= # space-separated list of tmpfs mount points to umount
# before removing swap if swapoff_umount=manual
# One-time actions and programs on boot-up.
#
savecore=YES savecore_flags="-z"
savecore_dir="/var/crash"
resize_disklabel=NO # resize disklabel to fill disk
resize_gpt=NO # resize GPT to fill disk
resize_root=NO # resize root to fill partition
per_user_tmp=NO # per-user /tmp directories
per_user_tmp_dir="/private/tmp" # real storage for /tmp
clear_tmp=YES # clear /tmp after reboot
update_motd=YES # updates /etc/motd
update_motd_release=NO motd_release_tag="" # release info in /etc/motd
dmesg=YES dmesg_flags="-t" # write /var/run/dmesg.boot
accounting=NO # uses /var/account/acct
newsyslog=NO newsyslog_flags="" # trim log files
quota=YES # check and enable quotas
ldconfig=YES # rebuild a.out ldconfig cache
sysdb=YES # build system databases
rndctl=NO rndctl_flags="" # configure rndctl(8)
gpio=NO # configure GPIO devices
modules=YES # process /etc/modules.conf
certctl_init=NO # rehash /etc/openssl/certs
# cope with other OSes using the real time clock at localtime on this
# machine (by adjusting kern.rtc_offset at boot)
rtclocaltime=NO
# NOTE: default coredump name now set in /etc/sysctl.conf
#
# File system check flags; default to preen mode, checking file systems
# that are listed in /etc/fstab in parallel as the fsck pass number
# permits. Fix minor faults automatically, and exit with non 0 only
# when major errors occur.
#
fsck_flags=-p
# Security setting. If $securelevel is non-empty, the system securelevel
# is set to this value early in the boot sequence. Otherwise the default
# action is taken (see init(8)).
#
securelevel="" # securelevel to set to
# To set the IP address of an interface either use
# ifconfig_xxN="IP-NO"
# where xxN is the interface. If this variable is not set then
# contents of the file /etc/ifconfig.xxN is used.
# Networking startup.
#
# Wait up to 15 seconds for the tentative flag to clear from all addresses.
# Wait up to 5 seconds for the detached flag to clear from all addresses.
# Addresses are detached if there is no carrier, thus we have a small
# wait to see if we get a carrier.
# Even a wired interface may not recognise it has a carrier right away.
ifconfig_wait_dad_flags="-w 15 -W 5"
mdnsd=NO
npf=NO npf_rules="/etc/npf.conf"
npfd=NO npfd_flags=""
ipfilter=NO ipfilter_flags="" # uses /etc/ipf.conf
ipnat=NO # uses /etc/ipnat.conf
ipfs=NO ipfs_flags="" # save/load ipnat and ipf states
ipsec=NO # uses /etc/ipsec.conf
ipmon=NO ipmon_flags="-Dns" # syslog ipfilter messages
pf=NO pf_rules="/etc/pf.conf" pf_flags=""
pflogd=NO
ftp_proxy=NO
racoon=NO # IKE daemon
auto_ifconfig=YES # config all avail. interfaces
net_interfaces="" # used only if above is NO
flushroutes=YES # flush routes in netstart
dhcpcd=NO dhcpcd_flags="-qM" # For ifconfig_XXX=dhcp.
ntpdate=NO ntpdate_flags="-b -s" # May need '-u' thru firewall
ppp=YES ppp_peers="" # /etc/ppp/peers to call
ip6mode=host # host, autohost or router
ip6uniquelocal=NO # IPv6 unique-local forwarding
# Special treatment for interfaces that need to be downed on
# shutdown (because they might cause unnecessary costs or block resources
# on the peer). All pppoe* interfaces are automatically included in this
# list, add others here manually.
#force_down_interfaces=""
# rpcbind (formerly known as 'portmap') is used to look up RPC-based services.
#
rpcbind=NO rpcbind_flags="-l" # -l logs libwrap
# Commonly used daemons.
#
syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only
cron=YES
named=NO named_flags="" # see below for named_chrootdir
timed=NO timed_flags=""
ntpd=NO ntpd_flags="" # see below for ntpd_chrootdir
# The default setting for postfix here is YES, but gets re-examined by
# the rc.d/postfix startup script when it runs. The script sets
# _rc_d_postfix to "check", and then causes all rc.conf settings to
# be re-evaluated. If the value of $postfix after this is "check",
# the script then checks to see if /etc/mailer.conf selects the system
# postfix. If not, it does print a warning and does not start postfix
# to avoid conflict with a different MTA.
postfix=${_rc_d_postfix:-YES}
lpd=NO lpd_flags="-s" # -s "secure" unix domain only
sshd=NO sshd_flags=""
ssh_keygen_flags=""
ftpd=NO ftpd_flags="-ll"
httpd=NO httpd_flags=""
httpd_wwwdir="/var/www"
httpd_wwwuser="_httpd"
# To run the named(8) DNS server as an unprivileged user under a
# chroot(2) cage, uncomment the following after migrating the contents
# of /etc/namedb to /var/chroot/named/etc/namedb
#
#named_chrootdir="/var/chroot/named"
# To run the ntpd(8) NTP server as an unprivileged user under a
# chroot(2) cage, uncomment the following, after ensuring that:
# - The kernel has "pseudo-device clockctl" compiled in
# - /dev/clockctl is present
#
#ntpd_chrootdir="/var/chroot/ntpd"
# Bluetooth configuration
bluetooth=NO
# and the following are used when bluetooth=YES
btconfig_devices="" # all
bthcid=YES bthcid_flags=""
sdpd=YES sdpd_flags=""
# Other daemons.
#
rwhod=NO rwhod_flags="-u _rwhod"
devpubd=NO devpubd_flags="" # autocreate nodes for new devs
envsys=NO # Set /etc/envsys.conf preferences
autofs=NO automount_flags=""
automountd_flags=""
autounmountd_flags=""
# Hardware daemons.
#
apmd=NO apmd_flags="" # APM power management daemon.
powerd=NO powerd_flags="" # power management daemon
screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker
moused=NO # serial mouse handler
moused_flags="-p /dev/tty00"
wdogctl=NO # watchdog timer control
# wdogctl_flags="-k devicename"
irdaattach=NO # attach serial lines to IrDA
irdaattach_flags="tty00"
# Configuration of "wscons" console driver virtual screens.
#
wscons=NO wscons_flags="" # setup wscons from wscons.conf
# Configuration of "wsmoused" console driver cut-n-paste support
#
wsmoused=NO wsmoused_flags=""
# Entropy load/save to/from /dev/random at startup/shutdown
#
random_seed=YES
# Set to `check' to abort multi-user boot if not enough entropy, or
# `wait' to wait until enough entropy, or `' (empty) to boot without
# waiting or checking.
#
entropy="wait"
# Creating / updating of man page index on boot
makemandb=YES
