# Build and install X11 on Slackware Linux.

#!/bin/sh
#
# Build and install X11 on Slackware Linux.
#

VERSION=6.9.0
export ARCH=${ARCH:-i486}
BUILD=${BUILD:-11}

if [ "$ARCH" = "i386" ]; then
SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
elif [ "$ARCH" = "i486" ]; then
SLKCFLAGS="-O2 -march=i486 -mtune=i686"
elif [ "$ARCH" = "s390" ]; then
SLKCFLAGS="-O2"
elif [ "$ARCH" = "x86_64" ]; then
SLKCFLAGS="-O2"
fi

TMP=/tmp
BLOC=$TMP/x11-build
PKG=$BLOC/package-x11
if [ ! -d $TMP ]; then
mkdir -p $TMP
fi
rm -rf $BLOC $PKG
mkdir -p $BLOC $PKG

CWD=`pwd`
cd $BLOC
rm -rf xc
for file in $CWD/X11R${VERSION}-src*.tar.bz2 ; do
tar xjvf $file
done

cd xc
chown -R root:root .

# Misc patches:
zcat $CWD/site.def.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/Xlib.h.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/linux.cf.zlib.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/xorgconfig.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11.startwithblackscreen.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11.buildxterm.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11r6.9.0-geteuid.diff.gz | patch -p0 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11r6.9.0-mitri.diff.gz | patch -p0 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11r6.9.0-setuid-slackware-fixed.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11r6.9.0-cidfonts.diff.gz | patch -p0 --backup --verbose --suffix=.orig -E || exit 1
cd programs/xkbcomp
zcat $CWD/xkbdata_enable_ca_variants.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
cd ../..

# add support for the i945gm chip:
zcat $CWD/x11r6.9.0-i945gm-1.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1
zcat $CWD/x11r6.9.0-i945gm-2.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1

# Fix problems with some ATI chipsets:
#
# NOTE: This is commented out, as it seems to break ATI Mobility Radeon chipset
# support. *However*, if you have a different ATI chipset and are experiencing
# problems where your machine locks up in X after some time (from a few seconds to
# minutes), perhaps the patch below could help you. To apply it, just cut out the
# comment mark '#' from the patch line below and run ./x11.SlackBuild to rebuild X.
# The freetype and fontconfig package sources will also need to be located in the
# usual places within the Slackware source tree. I hope this helps someone... :-)
#
# I'm considering a patch package in /extra, so you might look there if you just
# want a quick package fix.
#
#zcat $CWD/x11r6.9.0.ati.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1

# Fix PCF font parsing bugs that can crash the X server:
zcat $CWD/x11r6.9.0.pcf.parser.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1

# Fix Greek keyboard layout:
zcat $CWD/x11r6.9.0-grlayout.diff.gz | patch -p1 --backup --verbose --suffix=.orig -E || exit 1

# Fix sloppiness:
find . -type f -name configure -exec chmod 755 {} \;
find . -type f -name mkinstalldirs -exec chmod 755 {} \;

# Set various compile defaults in host.def:
cat << EOF > config/cf/host.def
/*
* By default, the sample config files for xinit, xdm and xfs are installed
* only when there is no pre-existing version installed. Uncommenting the
* following lines will force the sample versions to be installed even if
* it means over-writing existing versions.
*/
#define InstallXinitConfig YES
#define InstallXdmConfig YES
#define InstallFSConfig YES
/* Other Slackware defaults */
#define FSUseSyslog YES
#define HasPam NO
#define UseUtempter YES
#define HasZlib YES
#define SharedLibGlu YES

/* Xprint is not the way to go on Linux which already has */
/* much better print facilities. I'm especially */
/* unimpressed with all the junk it drops in /etc/X11/... */
/* I can't imagine anyone actually using this on Linux. */
#define BuildXprint NO
#define BuildXprintClients NO
/* Support lagacy apps that link with libXp.so */
#define BuildXprintLib YES
/* This won't build without the all the other Xprint */
/* clutter, but was probably rather useless anyway. */
/* I've noticed that since all the unwanted Xprint junk */
/* was merged into X.Org that everyone else has also */
/* dropped support for Xprt... time to follow suit. */
#define XprtServer NO

/* Build static libs, too */
#define ForceNormalLib YES
/* Let X provide freetype2 at first, or it might not build correctly */
/* Later we can replace this with a newer version (if it passes our test suite) */
/* #define BuildFreetype2 YES */
/* We use our own expat */
#define HasExpat YES
/* We will allow X to build fontconfig, but will later upgrade it. */
/* #define HasFontconfig YES */
/* These are just examples if you use Glide... */
/* #define HasGlide3 YES */
/* #define Glide3IncDir /usr/include/glide3 */
EOF

# If we have the precompiled fonts, use those:
if [ -r $CWD/fonts.tar.bz2 ]; then
cat << EOF >> config/cf/host.def
/* Don't build the fonts, as we've already got them */
#define BuildFonts NO
EOF
mkdir -p /usr/X11R6/lib/X11
( cd /usr/X11R6/lib/X11
tar xjvf $CWD/fonts.tar.bz2
)
mkdir -p $PKG/usr/X11R6/lib/X11
( cd $PKG/usr/X11R6/lib/X11
tar xjvf $CWD/fonts.tar.bz2
)
else # otherwise build the fonts from source
cat << EOF >> config/cf/host.def
/* Build the X fonts from source */
#define BuildFonts YES
EOF
fi

# pkgconfig files (like alocal files) are best placed in a single location, like /usr/lib/pkgconfig.
# First make sure the pkgconfig directories exist:
mkdir -p /usr/lib/pkgconfig /usr/X11R6/lib/pkgconfig
# Then, move any existing files. This may (and probably will) produce an error if
# /usr/X11R6/lib/pkgconfig is empty, so we'll silence stderr:
mv /usr/X11R6/lib/pkgconfig/* /usr/lib/pkgconfig 2> /dev/null
# Finally, make a link from the old location to the system-wide one:
( cd /usr/X11R6/lib ; rm -rf pkgconfig )
( cd /usr/X11R6/lib ; ln -sf ../../lib/pkgconfig . )
# Now set up the same structure in the target install location:
mkdir -p $PKG/usr/lib/pkgconfig $PKG/usr/X11R6/lib
( cd $PKG/usr/X11R6/lib ; rm -rf pkgconfig )
( cd $PKG/usr/X11R6/lib ; ln -sf ../../lib/pkgconfig . )

# It's VERY important to build freetype2 ourselves first (or some functions are left
# out), but also to use the X supplied sources.
#
# Step one is to remove existing freetype2 cruft:
rm -rf /usr/include/freetype2 \
/usr/X11R6/include/freetype2 \
/usr/X11R6/include/ft2build.h \
/usr/lib/libfreetype.* \
/usr/X11R6/lib/libfreetype.*
# It seems prudent to move this into /usr rather than /usr/X11R6, as *many* source bits
# won't find ft2build.h in /usr/X11R6/include without some patching.
# Therefore, --prefix=/usr must be the ad-hoc standard. Another
# rationale: /usr is also the prefix for freetype1 (for as long as that sticks around),
# and putting them in different prefixes causes problems. Also, we're bumping the -march
# from i386 to i486, as I can't imagine too many people are running the latest Slackware
# with X on a 386 in the year 2002. If there are, maybe they can get away with running an
# earlier version of X. :-)
( cd extras/freetype2
CFLAGS="$SLKCFLAGS" make setup CFG="--prefix=/usr $ARCH-slackware-linux"
make
# This only needs to go to the main system for now
make install
)
ldconfig

# This shouldn't be needed (apps should pick up -I/usr/include/freetype2 from
# `freetype-config --cflags` while compiling), but it's so often reported as a bug that
# I'll give in to the point. Now that Freetype1 is pretty much gone having this link
# shouldn't hurt anything. Try not to rely on it, though.
( cd /usr/include
rm -rf freetype
ln -sf freetype2/freetype .
)

# Build and install X:
make World -j2 -i CDEBUGFLAGS="$SLKCFLAGS" || exit 1
make install DESTDIR=$PKG || exit 1

# Here, enjoy this old cruft and some never-used build script.

# Comment this out to see if 6.9.0 fixes this... it does. :-)
#
## On systems with ATI Rage128 video cards, the default DRI driver is no longer
## working due to a missing symbol bug. The bug in the 6.8.2 release can be
## demonstrated by setting up DRI on a system with an ATI Rage128 card and
## running the following command:
## LIBGL_DEBUG=verbose glxinfo
## This has been reported to X.Org's bug tracking system, but has not yet been
## fixed in a release, so until then we'll revert to using the r128_dri module
## from the previous version of X which works fine on my test boxes:
#if [ "$ARCH" = "i386" -o "$ARCH" = "i486" ]; then
# zcat $CWD/r128-module/r128_dri.so.gz > $PKG/usr/X11R6/lib/modules/dri/r128_dri.so
#fi

# This causes other utilities (like bdftruncate and ucs2any) to not be built, so
# while it saves time it's probably not a good way to build by default...
#
## Save the fonts so we don't need to build them the next time.
#if [ ! -r $CWD/fonts.tar.bz2 ]; then
# ( cd $PKG/usr/X11R6/lib/X11/fonts
# find . -type f | xargs chmod 644
# )
# ( cd $PKG/usr/X11R6/lib/X11
# tar cjvf $CWD/fonts.tar.bz2 fonts
# )
#fi

## Do we want the X.Org SDK? Had a couple of requests, so maybe for /extra.
## Amazing that we got by this whole time without anything wanting
## xf86Version.h so it can't be something most people are clamoring for.
##
## Sorry... this is 10MB, and with only rare requests you'll have to build
## it from the sources. If you want it, just uncomment this stuff.
## Then build. :-)
##
## Oh -- more stuff to uncomment near the bottom of this script as well.
## Search for x11-sdk and you'll finf it easily.
##
#PKG13=$BLOC/package-x11-sdk
#mkdir -p $PKG13/install
#make install.sdk DESTDIR=$PKG13 || exit 1
#( cd $PKG13
# find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
# find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
#)

# OK, now we must spam your development box to ensure that the our rebuild of
# fontconfig links against the correct libraries. We'll also be doing this
# with the freetype rebuild. It saves many problems that could crop up with
# the compile, and besides, that's what a development box is for. It should
# be disposable. :-)

make install
ldconfig

# Install man pages:
make install.man DESTDIR=$PKG

# More useless Xprint clutter. Great to see new cruft.
rm -rf $PKG/usr/X11R6/include/X11/Xprint*
rm -f $PKG/usr/X11R6/lib/libXprint*.a
rm -f $PKG/usr/X11R6/man/man7/Xprint*

## *** If this is still a problem, report it to X.Org ***
##
## Just to be on the safe side, we should provide Compose files where
## they are missing, as it's been known to cause a crash.
#for dir in $PKG/usr/X11R6/lib/X11/locale/* ; do
# if [ -d $dir ]; then
# if [ -r $dir/XI18N_OBJS -o -r $dir/XLC_LOCALE ]; then
# if [ ! -r $dir/Compose ]; then
# NAME=`basename $dir`
# CAPN=`echo $NAME | tr [a-z] [A-Z]`
# cat << EOF > $dir/Compose
##
## $CAPN Compose Sequence
##
## Sequence Definition
##
## \$X11: xc/nls/Compose/$NAME,v 1.3 `date` volkerdi Exp $
##
## This file currently has no entries. It appears that a compose file (even
## just an empty one) is required for the appropriate keysyms to work for
## this encoding.
##
## <Multi_key> Means <Compose>
## Special Character
#
## End of Sequence Definition
#EOF
# fi
# fi
# fi
#done

# These are currently broken with Qt, but we'll install them anyway.
# Someday they might work in Konsole again.
mkdir -p $PKG/usr/X11R6/lib/X11/fonts/misc
cat $CWD/linux8x16.pcf.gz > $PKG/usr/X11R6/lib/X11/fonts/misc/linux8x16.pcf.gz
cat $CWD/linux8x8.pcf.gz > $PKG/usr/X11R6/lib/X11/fonts/misc/linux8x8.pcf.gz

# Don't need this
rm -f /usr/X11R6/lib/X11/config/host.def
rm -f $PKG/usr/X11R6/lib/X11/config/host.def

mkdir -p $PKG/etc/X11/xinit
cat $CWD/xinit/README.Xmodmap > $PKG/etc/X11/xinit/README.Xmodmap
# obsolete
#cat $CWD/xinit/.Xmodmap > $PKG/etc/X11/xinit/.Xmodmap

cp -a $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsession.orig
cp -a $PKG/etc/X11/xdm/Xsetup_0 $PKG/etc/X11/xdm/Xsetup_0.orig
cat $CWD/xdm/Xsession > $PKG/etc/X11/xdm/Xsession
cat $CWD/xdm/Xsetup_0 > $PKG/etc/X11/xdm/Xsetup_0
## I don't get this
#cat $CWD/xdm/Xsession.orig > $PKG/etc/X11/xdm/Xsession.orig
#cat $CWD/xdm/Xsetup_0.orig > $PKG/etc/X11/xdm/Xsetup_0.orig
# Treat some of these as config files:
mv $PKG/etc/X11/xdm/Xsession $PKG/etc/X11/xdm/Xsession.new
mv $PKG/etc/X11/xdm/xdm-config $PKG/etc/X11/xdm/xdm-config.new
mv $PKG/etc/X11/xdm/Xservers $PKG/etc/X11/xdm/Xservers.new
rm -rf $PKG/install
mkdir $PKG/install
zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh

# Cruft.
rm -f /usr/X11R6/lib/libz.a
rm -f $PKG/usr/X11R6/lib/libz.a

# We'll use the encodings on the system, so hopefully they are the right ones...
( cd $PKG/usr/X11R6/lib/X11/fonts/misc
mkfontdir -e /usr/X11R6/lib/X11/fonts/encodings -e /usr/X11R6/lib/X11/fonts/encodings/large .
)

## These are now handled properly without our help :-)
#( cd $PKG/etc/X11/xdm
# rm authdir
# ln -sf ../../../var/lib/xdm authdir
#)
#( cd /etc/X11/xkb
# rm compiled
# ln -sf ../../../var/lib/xkb compiled
#)

mv $PKG/etc/X11/xinit/xinitrc $PKG/etc/X11/xinit/xinitrc.twm
chmod 755 $PKG/etc/X11/xinit/xinitrc.twm
#mkdir -p $PKG/var/log/setup
#cat $CWD/setup.05.fontconfig > $PKG/var/log/setup/setup.05.fontconfig
#chmod 755 $PKG/var/log/setup/setup.05.fontconfig

cat $CWD/x11-devel/doinst.sh > $PKG/install/doinst.sh.devel
cp $CWD/slack-desc/slack-desc.* $PKG/install

cat << EOF >> $PKG/install/doinst.sh.fonts
#!/bin/sh
# Update the X font indexes:
if [ -x /usr/X11R6/bin/fc-cache ]; then
/usr/X11R6/bin/fc-cache -f
fi
# else we'll catch it later with setup.fontconfig :-)
# make links:
EOF

# A tool for configuring S3 Savage cards:
cd $BLOC
rm -rf s3switch
mkdir s3switch
cd s3switch
unzip $CWD/savage/s3ssrc.zip
make
cat s3switch > $PKG/usr/X11R6/bin/s3switch
chmod 755 $PKG/usr/X11R6/bin/s3switch
cat s3switch.1x | gzip -9c > $PKG/usr/X11R6/man/man1/s3switch.1x.gz

# Utilities to try the compositing and transparancy extensions:
cd $BLOC
rm -rf transset
tar xzf $CWD/transset.tar.gz
cd transset
make
cat transset > $PKG/usr/X11R6/bin/transset
chmod 755 $PKG/usr/X11R6/bin/transset
cd $BLOC
rm -rf xcompmgr
tar xzf $CWD/xcompmgr.tar.gz
cd xcompmgr
sh autogen.sh
/configure --prefix=/usr/X11R6
make
cat xcompmgr > $PKG/usr/X11R6/bin/xcompmgr
chmod 755 $PKG/usr/X11R6/bin/xcompmgr
cat xcompmgr.1 | gzip -9c > $PKG/usr/X11R6/man/man1/xcompmgr.1.gz

# Replace freetype2:
( cd $CWD/../../l/freetype
./freetype2.build
ldconfig
DESTDIR=$PKG ./freetype2.build
)

# Replace fontconfig:
( cd $CWD/../fontconfig
./fontconfig.build
ldconfig
DESTDIR=$PKG ./fontconfig.build
)

# crud removal:
rm -rf $PKG/usr/X11R6/share/doc
# We don't ship fonts.cache-1 files, we create them later.
find $PKG/usr -type f -name fonts.cache-1 -exec rm {} \;

# Strip binaries:
( cd $PKG
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip -g 2> /dev/null
)

# Compress all manpages:
find $PKG/usr/X11R6/man -name "*.?" | xargs gzip -9
find $PKG/usr/X11R6/man -name "*.?x" | xargs gzip -9

# Some of these links are now made, but some are missing.
# It's not known if they are really needed, but they don't hurt anything.
( cd $PKG
( cd etc/X11/xkb/rules ; rm -rf xfree86.lst )
( cd etc/X11/xkb/rules ; ln -sf xorg.lst xfree86.lst )
( cd etc/X11/xkb/rules ; rm -rf xfree86.xml )
( cd etc/X11/xkb/rules ; ln -sf xorg.xml xfree86.xml )
( cd etc/X11/xkb/rules ; rm -rf xfree86-it.lst )
( cd etc/X11/xkb/rules ; ln -sf xorg-it.lst xfree86-it.lst )
( cd etc/X11/xkb/rules ; rm -rf xfree86 )
( cd etc/X11/xkb/rules ; ln -sf xorg xfree86 )
)

# Clean out any freetype/fontconfig "residue":
rm --verbose -rf \
$PKG/usr/X11R6/bin/freetype-config \
$PKG/usr/X11R6/include/freetype2 \
$PKG/usr/X11R6/include/ft2build.h \
$PKG/usr/X11R6/lib/libfreetype.* \
$PKG/usr/X11R6/lib/X11/doc/freetype* \
$PKG/usr/X11R6/lib/pkgconfig/freetype.pc \
$PKG/usr/bin/freetype-config \
$PKG/usr/include/freetype2 \
$PKG/usr/include/ft2build.h \
$PKG/usr/lib/libfreetype.* \
$PKG/usr/doc/freetype* \
$PKG/usr/lib/pkgconfig/freetype.pc \
$PKG/usr/share/aclocal/freetype2.m4
rmdir $PKG/usr/share/aclocal
rmdir $PKG/usr/share
rm --verbose -rf \
$PKG/usr/X11R6/bin/fontconfig-config \
$PKG/usr/X11R6/include/fontconfig \
$PKG/usr/X11R6/lib/pkgconfig/fontconfig.pc \
$PKG/usr/X11R6/lib/libfontconfig.* \
$PKG/usr/X11R6/lib/X11/doc/fontconfig* \
$PKG/usr/X11R6/man/man?/fc-* \
$PKG/usr/X11R6/man/man3/Fc* \
$PKG/usr/bin/fontconfig-config \
$PKG/usr/include/fontconfig \
$PKG/usr/lib/pkgconfig/fontconfig.pc \
$PKG/usr/lib/libfontconfig.* \
$PKG/usr/doc/fontconfig* \
$PKG/usr/man/man?/fc-*
rm --verbose -rf \
$PKG/etc/fonts

cat << EOF

Slackware X build complete!

EOF

# Perms needed for ordinary users to start X:
chmod 4711 $PKG/usr/X11R6/bin/Xorg

# x11-fonts-misc package:
PKG2=$BLOC/package-x11-fonts-misc
mkdir -p $PKG2/usr/X11R6/lib/X11/fonts $PKG2/install
mv $PKG/usr/X11R6/lib/X11/fonts/75dpi $PKG2/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/CID $PKG2/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/encodings $PKG2/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/misc $PKG2/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/util $PKG2/usr/X11R6/lib/X11/fonts
# Make other directories to avoid fontpath warnings:
mkdir -p \
$PKG2/usr/X11R6/lib/X11/fonts/TTF \
$PKG2/usr/X11R6/lib/X11/fonts/Type1 \
$PKG2/usr/X11R6/lib/X11/fonts/local \
$PKG2/usr/X11R6/lib/X11/fonts/Speedo \
$PKG2/usr/X11R6/lib/X11/fonts/100dpi \
$PKG2/usr/X11R6/lib/X11/fonts/cyrillic
cp $PKG/install/doinst.sh.fonts $PKG2/install/doinst.sh
mv $PKG/install/slack-desc.x11-fonts-misc $PKG2/install/slack-desc

# x11-fonts-100dpi package:
PKG3=$BLOC/package-x11-fonts-100dpi
mkdir -p $PKG3/usr/X11R6/lib/X11/fonts $PKG3/install
mv $PKG/usr/X11R6/lib/X11/fonts/100dpi $PKG3/usr/X11R6/lib/X11/fonts
cp $PKG/install/doinst.sh.fonts $PKG3/install/doinst.sh
mv $PKG/install/slack-desc.x11-fonts-100dpi $PKG3/install/slack-desc

# x11-fonts-cyrillic package:
PKG4=$BLOC/package-x11-fonts-cyrillic
mkdir -p $PKG4/usr/X11R6/lib/X11/fonts $PKG4/install
mv $PKG/usr/X11R6/lib/X11/fonts/cyrillic $PKG4/usr/X11R6/lib/X11/fonts
cp $PKG/install/doinst.sh.fonts $PKG4/install/doinst.sh
mv $PKG/install/slack-desc.x11-fonts-cyrillic $PKG4/install/slack-desc

# x11-fonts-scale package:
PKG5=$BLOC/package-x11-fonts-scale
mkdir -p $PKG5/usr/X11R6/lib/X11/fonts $PKG5/install
mv $PKG/usr/X11R6/lib/X11/fonts/TTF $PKG5/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/Type1 $PKG5/usr/X11R6/lib/X11/fonts
mv $PKG/usr/X11R6/lib/X11/fonts/Speedo $PKG5/usr/X11R6/lib/X11/fonts
cp $PKG/install/doinst.sh.fonts $PKG5/install/doinst.sh
mv $PKG/install/slack-desc.x11-fonts-scale $PKG5/install/slack-desc

# x11-docs-html package:
PKG6=$BLOC/package-x11-docs-html
mkdir -p $PKG6/usr/X11R6/lib/X11/doc $PKG6/install
mv $PKG/usr/X11R6/lib/X11/doc/html $PKG6/usr/X11R6/lib/X11/doc
mv $PKG/install/slack-desc.x11-docs-html $PKG6/install/slack-desc

# x11-docs package:
PKG7=$BLOC/package-x11-docs
mkdir -p $PKG7/usr/X11R6/lib/X11 $PKG7/install
mv $PKG/usr/X11R6/lib/X11/doc $PKG7/usr/X11R6/lib/X11
mv $PKG/install/slack-desc.x11-docs $PKG7/install/slack-desc

# x11-xnest package:
PKG8=$BLOC/package-x11-xnest
mkdir -p $PKG8/usr/X11R6/bin $PKG8/install
mv $PKG/usr/X11R6/bin/Xnest $PKG8/usr/X11R6/bin
mv $PKG/install/slack-desc.x11-xnest $PKG8/install/slack-desc

## x11-xprt package (deprecated due to unacceptable Xprint bloat):
#PKG9=$BLOC/package-x11-xprt
#mkdir -p $PKG9/usr/X11R6/bin $PKG9/install
#mv $PKG/usr/X11R6/bin/Xprt $PKG9/usr/X11R6/bin
#mv $PKG/install/slack-desc.x11-xprt $PKG9/install/slack-desc

# x11-xvfb package:
PKG10=$BLOC/package-x11-xvfb
mkdir -p $PKG10/usr/X11R6/bin $PKG10/install
mv $PKG/usr/X11R6/bin/Xvfb $PKG10/usr/X11R6/bin
mv $PKG/install/slack-desc.x11-xvfb $PKG10/install/slack-desc

# x11-devel package:
PKG11=$BLOC/package-x11-devel
mkdir -p $PKG11/usr/X11R6/lib/X11 $PKG11/usr/lib $PKG11/usr/X11R6/man $PKG11/install
mv $PKG/usr/lib/pkgconfig $PKG11/usr/lib
chmod 644 $PKG11/usr/lib/pkgconfig/*
mv $PKG/usr/X11R6/lib/pkgconfig $PKG11/usr/X11R6/lib
mv $PKG/usr/X11R6/lib/X11/config $PKG11/usr/X11R6/lib/X11
mv $PKG/usr/X11R6/lib/*.a $PKG11/usr/X11R6/lib
mv $PKG/usr/lib/*.a $PKG11/usr/lib
mv $PKG/usr/X11R6/man/man3 $PKG11/usr/X11R6/man
mv $PKG/usr/share $PKG11/usr
mv $PKG/usr/include $PKG11/usr
mv $PKG/usr/X11R6/src $PKG11/usr/X11R6
mv $PKG/usr/X11R6/include $PKG11/usr/X11R6
# We don't want it all, we just want a little bit.
mkdir -p $PKG/usr/X11R6/include/X11
mv $PKG11/usr/X11R6/include/X11/bitmaps $PKG/usr/X11R6/include/X11
mv $PKG11/usr/X11R6/include/X11/pixmaps $PKG/usr/X11R6/include/X11
# Don't ship this:
mv $PKG/install/slack-desc.x11-devel $PKG11/install/slack-desc
mv $PKG/install/doinst.sh.devel $PKG11/install/doinst.sh

# x11-xdmx package:
PKG12=$BLOC/package-x11-xdmx
mkdir -p $PKG12/usr/X11R6/bin $PKG12/usr/X11R6/man/man1 $PKG12/install
mv $PKG/usr/X11R6/bin/Xdmx $PKG12/usr/X11R6/bin
mv $PKG/usr/X11R6/man/man1/Xdmx.1x.gz $PKG12/usr/X11R6/man/man1
mv $PKG/usr/X11R6/man/man1/dmxtodmx.1x.gz $PKG12/usr/X11R6/man/man1
mv $PKG/usr/X11R6/man/man1/vdltodmx.1x.gz $PKG12/usr/X11R6/man/man1
mv $PKG/usr/X11R6/man/man1/xdmxconfig.1x.gz $PKG12/usr/X11R6/man/man1
mv $PKG/install/slack-desc.x11-xdmx $PKG12/install/slack-desc

# Clean up leftover stuff:
rm -f $PKG/install/doinst.sh.fonts \
$PKG/install/slack-desc.x11-drm

# Don't ship anything in here:
rm -f $PKG/usr/X11R6/lib/X11/fonts/local/*

# Build the packages:
cd $PKG
mv install/slack-desc.x11 install/slack-desc
makepkg -l y -c n ../x11-$VERSION-$ARCH-$BUILD.tgz

cd $PKG2
makepkg -l y -c n ../x11-fonts-misc-$VERSION-noarch-$BUILD.tgz

cd $PKG3
makepkg -l y -c n ../x11-fonts-100dpi-$VERSION-noarch-$BUILD.tgz

cd $PKG4
makepkg -l y -c n ../x11-fonts-cyrillic-$VERSION-noarch-$BUILD.tgz

cd $PKG5
makepkg -l y -c n ../x11-fonts-scale-$VERSION-noarch-$BUILD.tgz

cd $PKG6
makepkg -l y -c n ../x11-docs-html-$VERSION-noarch-$BUILD.tgz

cd $PKG7
makepkg -l y -c n ../x11-docs-$VERSION-noarch-$BUILD.tgz

cd $PKG8
makepkg -l y -c n ../x11-xnest-$VERSION-$ARCH-$BUILD.tgz

#cd $PKG9
#makepkg -l y -c n ../x11-xprt-$VERSION-$ARCH-$BUILD.tgz

cd $PKG10
makepkg -l y -c n ../x11-xvfb-$VERSION-$ARCH-$BUILD.tgz

cd $PKG11
makepkg -l y -c n ../x11-devel-$VERSION-$ARCH-$BUILD.tgz

cd $PKG12
makepkg -l y -c n ../x11-xdmx-$VERSION-$ARCH-$BUILD.tgz

## Sorry, not by default due to size increase. Maybe next time.
#if [ -d $PKG13 ]; then
# cd $PKG13
# makepkg -l y -c n ../x11-sdk-$VERSION-$ARCH-$BUILD.tgz
#fi

cat << EOF

Slackware X .tgz packages build complete!

EOF