-----BEGIN PGP SIGNED MESSAGE-----


=============================================================================
CERT(*) Advisory CA-95:16
Original issue date: November 30, 1995
Last revised: September 23, 1997
               Updated copyright statement

             A complete revision history is at the end of this file.

Topic: wu-ftpd Misconfiguration Vulnerability
- -----------------------------------------------------------------------------

A vulnerability exists with certain configurations of the SITE EXEC command
in the Washington University ftpd, also known as wu-ftpd. Exploitation of
this vulnerability may allow root access from any account on the system.

The vulnerable configuration is known to exist in numerous Linux distributions
and is currently being actively exploited by intruders.

It should be noted that this vulnerability is not necessarily limited to Linux
but may exist on any wu-ftpd installation. Thus, all users of the wu-ftpd
program, not just the Linux users, should take this opportunity to verify the
configuration of their daemons. Note that versions of wu-ftpd before the 2.4
release contain serious security vulnerabilities and should be updated
immediately.

Section III contains instructions for disabling ftpd and correcting the
configuration.

We will update this advisory as we receive additional information.
Please check advisory files regularly for updates that relate to your site.

- -----------------------------------------------------------------------------

I.   Description

    There is a problem with the default configuration of the Washington
    University FTP Server version 2.4 in major Linux distributions, including
    but not limited to Slackware 2.0, 2.1, 2.2, 2.3, Yggdrasil Plug&Play
    Fall'94, and the Debian Distribution. By exploiting this problem, any
    user who is able to log into a system having the vulnerable configuration
    via FTP using their login, and not the anonymous login, may gain root
    access.

    Other systems besides Linux can be configured to be vulnerable although
    the standard wu-ftpd 2.4 source code as distributed is not vulnerable.

    The problem is that the variable _PATH_EXECPATH was set to "/bin" in
    the configuration file src/pathnames.h when the distribution binary
    was built. _PATH_EXECPATH should be set to "/bin/ftp-exec" or a similar
    directory that does not contain a shell or command interpreter, for
    example. The source code shipped with the Linux distributions contains
    the correct value ("/bin/ftp-exec") despite the incorrect distribution
    binary. You should verify that _PATH_EXECPATH has the correct value
    before recompiling.

    Note that the documentation for wu-ftpd states that the directory
    defined by _PATH_EXECPATH is relative to ~ftp, the ftp home directory
    as specified in the password file. This is misleading. The pathname
    is relative to ~ftp for anonymous users only. This pathname is relative
    to "/" for other user sessions.

II.  Impact

    Any user with a local account on a system offering FTP services
    with the vulnerable configuration may gain root access. Support for
    anonymous FTP access is not required to exploit this vulnerability.


III. How to determine if you are vulnerable

    All systems running wu-ftpd should be checked to determine if the
    configuration is vulnerable.

    To test your configuration, access the FTP server using a legitimate user
    account (not an anonymous FTP login) and login to your FTP server. For
    example:

         srchost> ftp ftphost
         Connected to ftphost
         220 ftphost FTP server (Version wu-2.4(2) Mon Apr 18 09:12:35 [...]
         ready.
         Name (srchost:joe):
         331 Password required for joe.
         Password:
         230 User joe logged in.

    Then type:

          ftp> quote site exec echo problem

    If you see the following response, then you are not vulnerable:

            200-echo problem
            200  (end of 'echo problem')

    However, if you see this following response, then you are vulnerable
    (note the additional '200-problem' entry):

            200-echo problem
            200-problem
            200  (end of 'echo problem')


IV. Solution

    If you have the vulnerability, we recommend that you turn off ftpd
    immediately using the method described in Section A below. Once you have
    done that, you can then decide whether to rebuild or fetch a new ftpd
    binary.

    If you have built wu-ftpd from a source distribution, follow the steps
    in Sections B.2 and B.3 below.

    Once you have eliminated this vulnerability, turn on ftpd with the
    method described in Section C below.

    A. Disable ftpd

       To disable ftpd, do the following as root.

       1. Shut down the FTP server using the ftpshut command.  This command
          blocks all connections to the FTP server.

          For ftpshut to work correctly, the ftpaccess(5) file will need a
          shutdown directive that names a file used by wu-ftpd to indicate
          that the server is shutdown. If your ftpaccess file does not have
          such a directive, add one to that file. When added, use ftpshut(8)
          to shut down the server. Once the server has been shutdown, all
          new incoming FTP requests will fail.

          Here is an example of the ftpshut command:

                   ftpshut now

       2. Verify that the FTP service has been shut down by attempting to
          connect to it. You should see a message that contains a line
          similar to the following:

                   hostname FTP server shut down -- please try again later

          where hostname is the host from which you are requesting
          FTP service.


    B. Correct the configuration

       Item 1 below applies to those running Debian Linux.  Item 2 applies
       to all other Linux systems.  Item 3 applies to those who are building
       wu-ftpd from source on systems other than Linux.

       1. If you are running Debian Linux, obtain a fixed binary,
          available from the following location, and install this binary.

        ftp://ftp.debian.org/debian/debian-0.93/binary/net/wu-ftpd-2.4-14.deb
        MD5 (wu-ftpd-2.4-14.deb) = c00a0aac75216bf83568aee4c2e7d168

       2. If you are running any version of Linux, there is a version of
          the source code available that has been improved to compile more
          cleanly. It too is correctly configured for SITE EXEC. It is
          available from (file wu-ftpd-2.4-fixed.tar.gz)

        ftp://bach.cis.temple.edu/pub/Linux/security/wu-ftpd-2.4-fix/
        MD5 (wu-ftpd-2.4-fixed.tar.gz) = 3e1c6fd7cd6757e45894df0d3638b524

          This version is also correctly configured for the SITE EXEC
          command and can be compiled and installed. Consult Section
          IV below for suggestions on how to configure wu-ftpd.

       3. If you are running a version of wu-ftpd before version 2.4,
          you should upgrade to version 2.4 first. That version is
          available from

        ftp://wuarchive.wustl.edu/packages/wuarchive-ftpd/wu-ftpd-2.4.tar.Z
        MD5 (wu-ftpd-2.4.tar.Z) = 57f1a962c90a9b12825d39af518df433

          Version 2.4 is correctly configured for the SITE EXEC command
          and can be compiled and installed. Consult Section IV below for
          suggestions on how to configure wu-ftpd.


    C. Enabling ftpd

       1. To turn ftpd back on, delete the file referenced by the shutdown
          directive in your ftpaccess file.

       2. Verify that the FTP service has been enabled by attempting to
          connect to it. You should see a message that contains lines
          similar to the following:

srchost> ftp ftphost
Connected to ftphost
220 ftphost FTP server (Version wu-2.4(3) Mon Apr 3 16:53:11 EDT 1995) ready.
Name (srchost:joe):

IV.  Advice on configuring the FTP Daemon for SITE EXEC

    Here are some configuration guidelines for the directories named by
    the _PATH_EXECPATH variable.

    1. Directories used by SITE EXEC: The documentation for wu-ftpd
       states that the directory defined by the _PATH_EXECPATH variable is
       relative to ~ftp, the ftp home directory as specified in the password
       file. This is misleading. The pathname is relative to ~ftp for
       anonymous users only. The pathname is relative to "/" for all other
       user sessions.

       Therefore, you need to check the two directories used by the SITE
       EXEC command. For example, if the _PATH_EXECPATH variable is set to
       /bin/ftp-exec, then wu-ftpd searches the ~ftp/bin/ftp-exec directory
       for programs specified by SITE EXEC when the anonymous login is used,
       and the /bin/ftp-exec directory specified by SITE EXEC when any other
       login is used.

    2. Contents of the directories used by SITE EXEC: The commands installed
       in these directories can be executed by the SITE EXEC command. We
       strongly recommend that this directory contain only those programs
       that you wish to be executed by those users who connect to your FTP
       server. An example of a program to install in these directories is
       the ls program. Programs that should not be installed in these
       directories are shells, for example sh or csh, and command
       interpreters, for example awk and perl.


- ---------------------------------------------------------------------------
The CERT Coordination Center thanks AUSCERT, the Australian response team, and
Alexander O. Yuriev, Temple University, author of Linux Security Updates, for
their support in responding to this problem. Linux Security Updates are
available from
       http://bach.cis.temple.edu/linux/linux-security/
- ---------------------------------------------------------------------------

If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in the Forum of Incident
Response and Security Teams (FIRST).

If you wish to send sensitive incident or vulnerability information to
CERT staff by electronic mail, we strongly advise that the email be
encrypted. The CERT Coordination Center can support a shared DES key, PGP
(public key available via anonymous FTP on info.cert.org), or PEM (contact
CERT staff for details).

Internet email: [email protected]
Telephone: +1 412-268-7090 (24-hour hotline)
          CERT personnel answer 8:30 a.m.-5:00 p.m. EST(GMT-5)/EDT(GMT-4),
          and are on call for emergencies during other hours.
Fax: +1 412-268-6989

Postal address:  CERT Coordination Center
                Software Engineering Institute
                Carnegie Mellon University
                Pittsburgh, PA 15213-3890
                USA

CERT advisories and bulletins are posted on the USENET newsgroup
comp.security.announce. If you would like to have future advisories and
bulletins mailed to you or to a mail exploder at your site, please send mail
to [email protected].

Past CERT publications, information about FIRST representatives, and
other information related to computer security are available for anonymous
FTP from info.cert.org.


- -----------------------------------------------------------------------------

Copyright 1995, 1996 Carnegie Mellon University. Conditions for use,
disclaimers, and sponsorship information can be found in
http://www.cert.org/legal_stuff.html and ftp://ftp.cert.org/pub/legal_stuff .
If you do not have FTP or web access, send mail to [email protected] with
"copyright" in the subject line.

CERT is registered in the U.S. Patent and Trademark Office.


=============================================================================
UPDATES

Information for Solaris 2.4
- ---------------------------
   After the advisory was originally issued, Charles Jardine <[email protected]>
   provided the following information.

   The problem with the SITE EXEC command is that programs spawned by
   wu-ftpd are run as the effective user and group id of the logged in
   user but real user and group id of root (or however wu-ftpd is started
   by inetd, usually root).

   To address this, the following can be used as a basis for a patch.
   (Note that this patch works for Solaris 2.4 compiled with gcc-2.7.2.)


   *** /tmp/T0a001YI       Mon Dec  4 10:22:13 1995
   --- popen.c     Mon Dec  4 10:22:08 1995
   ***************
   *** 141,146 ****
   --- 141,158 ----
                 }
                 (void) close(pdes[1]);
             }
   + /*
   +  * This fixes the ``real'' problem with SITE EXEC
   +  */
   +       {
   +               uid_t u = geteuid();
   +               gid_t g = getegid();
   +
   +               setuid(0);
   +               setgid(g);
   +               setuid(u);
   +       }
   +
             execv(gargv[0], gargv);
             _exit(1);
         }



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Revision history

Sep. 23, 1997  Updated copyright statement
Aug. 30, 1996  Information previously in the README was inserted
              into the advisory.
Jan. 19, 1996  Updates - Added code that can be used as the basis for a patch
              for the SITE EXEC command for Solaris 2.4.
Dec. 19, 1995  Sec. III - Expanded the explanation of how to determine if
              you are vulnerable.





-----BEGIN PGP SIGNATURE-----
Version: 2.6.2

iQCVAwUBNDo7U3VP+x0t4w7BAQFjuQP+ONgF40Rzxpim0WG2K8frDk1nm+NSwc1D
QYpM4AYTZy8dOifZZaIvI5dP51wbf7nRL2iaXEU1oAHvdQQoGnPhUTsCbDUjcrln
I5L721AKR62XGQvu1qS7lFS5IsfDLGo5f4dE9Ux/sYQoDoQqonjDC1xKCHFEFGAz
ia94mg70vf0=
=J+6G
-----END PGP SIGNATURE-----

You are viewing proxied material from ftp.icm.edu.pl. The copyright of proxied material belongs to its original authors. Any comments or complaints in relation to proxied material should be directed to the original authors of the content concerned. Please see the disclaimer for more details.